# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@


VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
	$(srcdir)/xmlsec-config.in $(srcdir)/xmlsec-gcrypt.pc.in \
	$(srcdir)/xmlsec-gnutls.pc.in $(srcdir)/xmlsec-nss.pc.in \
	$(srcdir)/xmlsec-openssl.pc.in $(srcdir)/xmlsec.pc.in \
	$(srcdir)/xmlsec.spec.in $(srcdir)/xmlsecConf.sh.in \
	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
	TODO config.guess config.sub depcomp install-sh ltmain.sh \
	missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = xmlsec1.pc xmlsec1Conf.sh xmlsec1-config \
	xmlsec1-openssl.pc xmlsec1-gnutls.pc xmlsec1-gcrypt.pc \
	xmlsec1-nss.pc xmlsec1.spec
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(confexecdir)" \
	"$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)"
SCRIPTS = $(bin_SCRIPTS)
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
DATA = $(confexec_DATA) $(m4data_DATA) $(pkgconfig_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d "$(distdir)" \
    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr "$(distdir)"; }; }
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CP = @CP@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GCRYPT_CFLAGS = @GCRYPT_CFLAGS@
GCRYPT_CRYPTO_LIB = @GCRYPT_CRYPTO_LIB@
GCRYPT_LIBS = @GCRYPT_LIBS@
GCRYPT_MIN_VERSION = @GCRYPT_MIN_VERSION@
GNUTLS_CFLAGS = @GNUTLS_CFLAGS@
GNUTLS_CRYPTO_LIB = @GNUTLS_CRYPTO_LIB@
GNUTLS_LIBS = @GNUTLS_LIBS@
GNUTLS_MIN_VERSION = @GNUTLS_MIN_VERSION@
GREP = @GREP@
HELP2MAN = @HELP2MAN@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBXML_CFLAGS = @LIBXML_CFLAGS@
LIBXML_CONFIG = @LIBXML_CONFIG@
LIBXML_LIBS = @LIBXML_LIBS@
LIBXML_MIN_VERSION = @LIBXML_MIN_VERSION@
LIBXSLT_CFLAGS = @LIBXSLT_CFLAGS@
LIBXSLT_CONFIG = @LIBXSLT_CONFIG@
LIBXSLT_LIBS = @LIBXSLT_LIBS@
LIBXSLT_MIN_VERSION = @LIBXSLT_MIN_VERSION@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MAN2HTML = @MAN2HTML@
MKDIR_P = @MKDIR_P@
MOZILLA_MIN_VERSION = @MOZILLA_MIN_VERSION@
MSCRYPTO_CFLAGS = @MSCRYPTO_CFLAGS@
MSCRYPTO_CRYPTO_LIB = @MSCRYPTO_CRYPTO_LIB@
MSCRYPTO_LIBS = @MSCRYPTO_LIBS@
MV = @MV@
NM = @NM@
NMEDIT = @NMEDIT@
NSPR_MIN_VERSION = @NSPR_MIN_VERSION@
NSPR_PACKAGE = @NSPR_PACKAGE@
NSS_CFLAGS = @NSS_CFLAGS@
NSS_CRYPTO_LIB = @NSS_CRYPTO_LIB@
NSS_LIBS = @NSS_LIBS@
NSS_MIN_VERSION = @NSS_MIN_VERSION@
NSS_PACKAGE = @NSS_PACKAGE@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
OPENSSL_CRYPTO_LIB = @OPENSSL_CRYPTO_LIB@
OPENSSL_LIBS = @OPENSSL_LIBS@
OPENSSL_MIN_VERSION = @OPENSSL_MIN_VERSION@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKGCONFIG_PRESENT = @PKGCONFIG_PRESENT@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
RM = @RM@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TAR = @TAR@
U = @U@
VERSION = @VERSION@
XMLSEC_APP_DEFINES = @XMLSEC_APP_DEFINES@
XMLSEC_CFLAGS = @XMLSEC_CFLAGS@
XMLSEC_CORE_CFLAGS = @XMLSEC_CORE_CFLAGS@
XMLSEC_CORE_LIBS = @XMLSEC_CORE_LIBS@
XMLSEC_CRYPTO = @XMLSEC_CRYPTO@
XMLSEC_CRYPTO_CFLAGS = @XMLSEC_CRYPTO_CFLAGS@
XMLSEC_CRYPTO_DISABLED_LIST = @XMLSEC_CRYPTO_DISABLED_LIST@
XMLSEC_CRYPTO_EXTRA_LDFLAGS = @XMLSEC_CRYPTO_EXTRA_LDFLAGS@
XMLSEC_CRYPTO_LIB = @XMLSEC_CRYPTO_LIB@
XMLSEC_CRYPTO_LIBS = @XMLSEC_CRYPTO_LIBS@
XMLSEC_CRYPTO_LIST = @XMLSEC_CRYPTO_LIST@
XMLSEC_CRYPTO_PC_FILES_LIST = @XMLSEC_CRYPTO_PC_FILES_LIST@
XMLSEC_DEFINES = @XMLSEC_DEFINES@
XMLSEC_DL_INCLUDES = @XMLSEC_DL_INCLUDES@
XMLSEC_DL_LIBS = @XMLSEC_DL_LIBS@
XMLSEC_DOCDIR = @XMLSEC_DOCDIR@
XMLSEC_EXTRA_LDFLAGS = @XMLSEC_EXTRA_LDFLAGS@
XMLSEC_GCRYPT_CFLAGS = @XMLSEC_GCRYPT_CFLAGS@
XMLSEC_GCRYPT_LIBS = @XMLSEC_GCRYPT_LIBS@
XMLSEC_GNUTLS_CFLAGS = @XMLSEC_GNUTLS_CFLAGS@
XMLSEC_GNUTLS_LIBS = @XMLSEC_GNUTLS_LIBS@
XMLSEC_LIBDIR = @XMLSEC_LIBDIR@
XMLSEC_LIBS = @XMLSEC_LIBS@
XMLSEC_NO_AES = @XMLSEC_NO_AES@
XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING = @XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING@
XMLSEC_NO_CRYPTO_DYNAMIC_LOADING = @XMLSEC_NO_CRYPTO_DYNAMIC_LOADING@
XMLSEC_NO_DES = @XMLSEC_NO_DES@
XMLSEC_NO_DSA = @XMLSEC_NO_DSA@
XMLSEC_NO_GCRYPT = @XMLSEC_NO_GCRYPT@
XMLSEC_NO_GNUTLS = @XMLSEC_NO_GNUTLS@
XMLSEC_NO_GOST = @XMLSEC_NO_GOST@
XMLSEC_NO_HMAC = @XMLSEC_NO_HMAC@
XMLSEC_NO_LIBXSLT = @XMLSEC_NO_LIBXSLT@
XMLSEC_NO_MD5 = @XMLSEC_NO_MD5@
XMLSEC_NO_MSCRYPTO = @XMLSEC_NO_MSCRYPTO@
XMLSEC_NO_NSS = @XMLSEC_NO_NSS@
XMLSEC_NO_OPENSSL = @XMLSEC_NO_OPENSSL@
XMLSEC_NO_RIPEMD160 = @XMLSEC_NO_RIPEMD160@
XMLSEC_NO_RSA = @XMLSEC_NO_RSA@
XMLSEC_NO_SHA1 = @XMLSEC_NO_SHA1@
XMLSEC_NO_SHA224 = @XMLSEC_NO_SHA224@
XMLSEC_NO_SHA256 = @XMLSEC_NO_SHA256@
XMLSEC_NO_SHA384 = @XMLSEC_NO_SHA384@
XMLSEC_NO_SHA512 = @XMLSEC_NO_SHA512@
XMLSEC_NO_X509 = @XMLSEC_NO_X509@
XMLSEC_NO_XKMS = @XMLSEC_NO_XKMS@
XMLSEC_NO_XMLDSIG = @XMLSEC_NO_XMLDSIG@
XMLSEC_NO_XMLENC = @XMLSEC_NO_XMLENC@
XMLSEC_NSS_CFLAGS = @XMLSEC_NSS_CFLAGS@
XMLSEC_NSS_LIBS = @XMLSEC_NSS_LIBS@
XMLSEC_OPENSSL_CFLAGS = @XMLSEC_OPENSSL_CFLAGS@
XMLSEC_OPENSSL_LIBS = @XMLSEC_OPENSSL_LIBS@
XMLSEC_PACKAGE = @XMLSEC_PACKAGE@
XMLSEC_STATIC_BINARIES = @XMLSEC_STATIC_BINARIES@
XMLSEC_VERSION = @XMLSEC_VERSION@
XMLSEC_VERSION_INFO = @XMLSEC_VERSION_INFO@
XMLSEC_VERSION_MAJOR = @XMLSEC_VERSION_MAJOR@
XMLSEC_VERSION_MINOR = @XMLSEC_VERSION_MINOR@
XMLSEC_VERSION_SAFE = @XMLSEC_VERSION_SAFE@
XMLSEC_VERSION_SUBMINOR = @XMLSEC_VERSION_SUBMINOR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
NULL = 
SAFE_VERSION = @XMLSEC_VERSION_SAFE@
SUBDIRS = include src apps man docs
TEST_APP = apps/xmlsec1$(EXEEXT)
DEFAULT_CRYPTO = @XMLSEC_CRYPTO@
bin_SCRIPTS = xmlsec1-config
pkgconfig_DATA = xmlsec1.pc @XMLSEC_CRYPTO_PC_FILES_LIST@
pkgconfigdir = $(libdir)/pkgconfig
confexecdir = $(libdir)
confexec_DATA = xmlsec1Conf.sh
m4datadir = $(datadir)/aclocal
m4data_DATA = xmlsec1.m4
ACLOCAL_AMFLAGS = -I m4
DISTCLEANFILES = \
	xmlsec1Conf.sh \
	xmlsec1.pc \
	xmlsec1-openssl.pc \
	xmlsec1-nss.pc \
	xmlsec1-gnutls.pc \
	xmlsec1-gcrypt.pc \
	xmlsec1-config \
	xmlsec1.spec \
	stamp-h2 \
	stamp-h3 \
	stamp-h4 \
	stamp-h5 \
	$NULL

EXTRA_DIST = \
	m4 \
	examples \
	scripts \
	tests \
	win32 \
	NEWS \
	ChangeLog \
	Copyright \
	HACKING \
	xmlsec-openssl.pc.in \
	xmlsec-nss.pc.in\
	xmlsec-gnutls.pc.in \
	xmlsec-gcrypt.pc.in \
	xmlsec-config.in \
	xmlsecConf.sh.in \
	xmlsec.spec.in \
	xmlsec1Conf.sh \
	xmlsec1.pc @XMLSEC_CRYPTO_PC_FILES_LIST@ \
	xmlsec1-config \
	xmlsec1.spec \
	xmlsec1.m4 \
	$(NULL)

EXTRA_CLEAN = \
	examples \
	$(NULL)

ABS_SRCDIR = @abs_srcdir@
ABS_BUILDDIR = @abs_builddir@
@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_FALSE@PRECHECK_COMMANDS = \
@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_FALSE@	for i in $(XMLSEC_CRYPTO_LIST) ; do \
@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_FALSE@	    export LD_LIBRARY_PATH="$(ABS_BUILDDIR)/src/$$i/.libs:$$LD_LIBRARY_PATH" ; \
@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_FALSE@	done && \
@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_FALSE@	cd $(ABS_SRCDIR) \
@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_FALSE@	$(NULL)	

@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_TRUE@PRECHECK_COMMANDS = \
@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_TRUE@	cd $(ABS_SRCDIR) \
@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_TRUE@	$(NULL)

CHECK_CRYPTO_LIST = \
	$(XMLSEC_CRYPTO_LIST) \
	$(NULL)

all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
am--refresh:
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
	@if test ! -f $@; then \
	  rm -f stamp-h1; \
	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
	else :; fi

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
xmlsec1.pc: $(top_builddir)/config.status $(srcdir)/xmlsec.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
xmlsec1Conf.sh: $(top_builddir)/config.status $(srcdir)/xmlsecConf.sh.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
xmlsec1-config: $(top_builddir)/config.status $(srcdir)/xmlsec-config.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
xmlsec1-openssl.pc: $(top_builddir)/config.status $(srcdir)/xmlsec-openssl.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
xmlsec1-gnutls.pc: $(top_builddir)/config.status $(srcdir)/xmlsec-gnutls.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
xmlsec1-gcrypt.pc: $(top_builddir)/config.status $(srcdir)/xmlsec-gcrypt.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
xmlsec1-nss.pc: $(top_builddir)/config.status $(srcdir)/xmlsec-nss.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
xmlsec1.spec: $(top_builddir)/config.status $(srcdir)/xmlsec.spec.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
install-binSCRIPTS: $(bin_SCRIPTS)
	@$(NORMAL_INSTALL)
	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-binSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(bindir)" && rm -f $$files

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt
install-confexecDATA: $(confexec_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(confexecdir)" || $(MKDIR_P) "$(DESTDIR)$(confexecdir)"
	@list='$(confexec_DATA)'; test -n "$(confexecdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(confexecdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(confexecdir)" || exit $$?; \
	done

uninstall-confexecDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(confexec_DATA)'; test -n "$(confexecdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(confexecdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(confexecdir)" && rm -f $$files
install-m4dataDATA: $(m4data_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(m4datadir)" || $(MKDIR_P) "$(DESTDIR)$(m4datadir)"
	@list='$(m4data_DATA)'; test -n "$(m4datadir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(m4datadir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(m4datadir)" || exit $$?; \
	done

uninstall-m4dataDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(m4data_DATA)'; test -n "$(m4datadir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(m4datadir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(m4datadir)" && rm -f $$files
install-pkgconfigDATA: $(pkgconfig_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
	done

uninstall-pkgconfigDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-lzma: distdir
	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
	$(am__remove_distdir)

dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lzma*) \
	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@$(am__cd) '$(distuninstallcheck_dir)' \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(SCRIPTS) $(DATA) config.h
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(confexecdir)" "$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
	distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-m4dataDATA install-pkgconfigDATA

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-binSCRIPTS install-confexecDATA

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-binSCRIPTS uninstall-confexecDATA \
	uninstall-m4dataDATA uninstall-pkgconfigDATA

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
	ctags-recursive install-am install-strip tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am am--refresh check check-am clean clean-generic \
	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
	dist-zip distcheck distclean distclean-generic distclean-hdr \
	distclean-libtool distclean-tags distcleancheck distdir \
	distuninstallcheck dvi dvi-am html html-am info info-am \
	install install-am install-binSCRIPTS install-confexecDATA \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-m4dataDATA install-man \
	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
	uninstall uninstall-am uninstall-binSCRIPTS \
	uninstall-confexecDATA uninstall-m4dataDATA \
	uninstall-pkgconfigDATA


docs: docs-man
	@(cd docs && $(MAKE) docs)

docs-clean: 
	@(cd docs && $(MAKE) clean)

docs-man: 
	@(cd man && $(MAKE) docs)

check: check-all check-info

check-all: $(TEST_APP) 
	@($(PRECHECK_COMMANDS) && \
	for crypto in $(CHECK_CRYPTO_LIST) ; do \
	    echo "=================== Checking xmlsec-$$crypto =================================" && \
	    $(SHELL) ./tests/testrun.sh \
	        $(ABS_SRCDIR)/tests/testKeys.sh \
	        $$crypto \
	        $(ABS_SRCDIR)/tests \
	        $(ABS_BUILDDIR)/$(TEST_APP) der \
	    && \
	    $(SHELL) ./tests/testrun.sh \
	        $(ABS_SRCDIR)/tests/testDSig.sh \
	        $$crypto \
	        $(ABS_SRCDIR)/tests \
	        $(ABS_BUILDDIR)/$(TEST_APP) \
	        der \
	    && \
	    $(SHELL) ./tests/testrun.sh \
	        $(ABS_SRCDIR)/tests/testEnc.sh \
	        $$crypto \
	        $(ABS_SRCDIR)/tests \
	        $(ABS_BUILDDIR)/$(TEST_APP) \
	        der \
	    ; \
	done; )

check-info:
	@echo "---------------------------- ATTENTION -----------------------------------"
	@echo "--- Some of the tests use resources located on external HTTP servers.  ---"
	@echo "--- If you have no Internet connection or the external resource is not ---"
	@echo "--- responding then the test will fail.                                ---"
	@echo "---------------------------- ATTENTION -----------------------------------"

check-keys: $(TEST_APP)
	@($(PRECHECK_COMMANDS) && \
	$(SHELL) ./tests/testrun.sh \
	    $(ABS_SRCDIR)/tests/testKeys.sh \
	    $(DEFAULT_CRYPTO) \
	    $(ABS_SRCDIR)/tests \
	    $(ABS_BUILDDIR)/$(TEST_APP) \
	    der \
	)

check-dsig: $(TEST_APP) 	
	@($(PRECHECK_COMMANDS) && \
	$(SHELL) ./tests/testrun.sh \
	    $(ABS_SRCDIR)/tests/testDSig.sh \
	    $(DEFAULT_CRYPTO) \
	    $(ABS_SRCDIR)/tests \
	    $(ABS_BUILDDIR)/$(TEST_APP) \
	    der \
	)

check-enc: $(TEST_APP) 
	@($(PRECHECK_COMMANDS) && \
	$(SHELL) ./tests/testrun.sh \
	    $(ABS_SRCDIR)/tests/testEnc.sh  \
	    $(DEFAULT_CRYPTO) \
	    $(ABS_SRCDIR)/tests \
	    $(ABS_BUILDDIR)/$(TEST_APP) \
	    der \
	)

check-xkms: $(TEST_APP) 	
	@($(PRECHECK_COMMANDS) && \
	$(SHELL) ./tests/testrun.sh \
	    $(ABS_SRCDIR)/tests/testXKMS.sh \
	    $(DEFAULT_CRYPTO) \
	    $(ABS_SRCDIR)/tests \
	    $(ABS_BUILDDIR)/$(TEST_APP) \
	    der \
	)

memcheck-res:
	@grep -i 'ERROR SUMMARY' /tmp/*.log | sed 's/.*==.*== *//' | sort -u
	@grep -i 'in use at exit' /tmp/*.log | sed 's/.*==.*== *//' | sort -u
	@grep -i 'total heap usage' /tmp/*.log | sed 's/.*==.*== *//' | sort -u

memcheck: $(TEST_APP)
	@(export DEBUG_MEMORY=1 && $(MAKE) check && $(MAKE) memcheck-res)

perfcheck: $(TEST_APP)
	@(export PERF_TEST=10 && $(MAKE) check)

dist-hook:

cleantar:
	@($(RM) -f xmlsec*.tar.gz COPYING.LIB)

tar-release: clean cleantar
	@(unset CDPATH && $(MAKE) dist)

rpm: cleantar tar-release
	@(unset CDPATH && rpmbuild -ta $(distdir).tar.gz)

rpm-release: clean cleantar rpm

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
