#!/bin/sh
################################################################################
#
# OCS Inventory NG Management Server Setup
#
# Copyleft 2006 Didier LIROULET
# Web: http://www.ocsinventory-ng.org
#
# This code is open source and may be copied and modified as long as the source
# code is always made freely available.
# Please refer to the General Public Licence http://www.gnu.org/ or Licence.txt
################################################################################
#

# Which host run database server
DB_SERVER_HOST="localhost"
# On which port run database server
DB_SERVER_PORT="3306"
# Database server credentials
DB_SERVER_USER="ocs"
DB_SERVER_PWD="ocs"
# Where is Apache daemon binary (if empty, will try to find it)
APACHE_BIN=""
# Where is Apache configuration file (if empty, will try to find it)
APACHE_CONFIG_FILE=""
# Where is Apache includes configuration directory (if emty, will try to find it)
APACHE_CONFIG_DIRECTORY=""
# Which user is running Apache web server (if empty, will try to find it)
APACHE_USER=""
# Which group is running Apache web server (if empty, will try to find it)
APACHE_GROUP=""
# Where is Apache document root directory (if empty, will try to find it)
APACHE_ROOT_DOCUMENT=""
# Which version of mod_perl is apache using,  1 for <= 1.999_21 and 2 for >= 1.999_22 (if empty, user will be asked for)
APACHE_MOD_PERL_VERSION=""
# Where are located OCS Communication server log files
OCS_COM_SRV_LOG="/var/log/ocsinventory-server"
# Where are located OCS Communication server plugins configuration files
OCS_COM_SRV_PLUGINS_CONFIG_DIR="/etc/ocsinventory-server/plugins"
# Where are located OCS Communication server plugins perl files 
OCS_COM_SRV_PLUGINS_PERL_DIR="/etc/ocsinventory-server/perl"
# Where is located perl interpreter
PERL_BIN=`which perl 2>/dev/null`
# Where is located make utility
MAKE=`which make 2>/dev/null`
# Where is located logrotate configuration directory
LOGROTATE_CONF_DIR="/etc/logrotate.d"
# Where is located newsyslog.conf 
NEWSYSLOG_CONF_FILE="/etc/newsyslog.conf"
# Where to store setup logs
SETUP_LOG=`pwd`/ocs_server_setup.log
# Communication Server Apache configuration file
COM_SERVER_APACHE_CONF_FILE="ocsinventory-server.conf" 
# Communication Server logrotate configuration file
COM_SERVER_LOGROTATE_CONF_FILE="ocsinventory-server" 
# Administration Console Apache configuration file
ADM_SERVER_APACHE_CONF_FILE="ocsinventory-reports.conf"
# Administration console read only files directory
ADM_SERVER_STATIC_DIR="/usr/share/ocsinventory-reports"
ADM_SERVER_STATIC_REPORTS_DIR="ocsreports"
ADM_SERVER_REPORTS_ALIAS="/ocsreports"
# Administration console read/write files dir
ADM_SERVER_VAR_DIR="/var/lib/ocsinventory-reports"
# Administration default packages directory and Apache alias
ADM_SERVER_VAR_PACKAGES_DIR="download"
ADM_SERVER_PACKAGES_ALIAS="/download"
# Administration default snmp directory and Apache alias
ADM_SERVER_VAR_SNMP_DIR="snmp"
ADM_SERVER_SNMP_ALIAS="/snmp"
# Administration console log files dir
ADM_SERVER_VAR_LOGS_DIR="logs"
# Administration console scripts log files dir
ADM_SERVER_VAR_SCRIPTS_LOGS_DIR="scripts"
# Administration console default ipdsicover-util.pl cache dir
ADM_SERVER_VAR_IPD_DIR="ipd"
# OS or linux distribution from automatic detection
UNIX_DISTRIBUTION=""

###################### DO NOT MODIFY BELOW #######################

# Check for Apache web server binaries
echo
echo "+----------------------------------------------------------+"
echo "|                                                          |"
echo "| Welcome to OCS Inventory NG Management server setup !    |"
echo "|                                                          |"
echo "+----------------------------------------------------------+"
echo
# Check for OS or linux distribution
echo "Trying to determine whitch OS or Linux distribution you use"

if [ -f /etc/redhat-release ]
then
    UNIX_DISTRIBUTION="redhat"
elif [ -f /etc/debian_version ]
then
    UNIX_DISTRIBUTION="debian"
elif [ -f /etc/SuSE-release ]
then
    UNIX_DISTRIBUTION="suse"
fi

# Check for Apache web server binaries
echo "+----------------------------------------------------------+"
echo "| Checking for Apache web server binaries !                |"
echo "+----------------------------------------------------------+"
echo
echo "CAUTION: If upgrading Communication server from OCS Inventory NG 1.0 RC2 and"
echo "previous, please remove any Apache configuration for Communication Server!"
echo
echo -n "Do you wish to continue ([y]/n)?"
read ligne
if [ -z "$ligne" ] || [ "$ligne" = "y" ] || [ "$ligne" = "Y" ]
then
    echo "Assuming Communication server 1.0 RC2 or previous is not installed"
    echo "on this computer."
    echo
else
    echo "Installation aborted !"
    echo
    exit 1
fi

echo > $SETUP_LOG
OCS_LOCAL_DATE=`date +%Y-%m-%d-%H-%M-%S`
echo "Starting OCS Inventory NG Management server setup on $OCS_LOCAL_DATE" >> $SETUP_LOG
echo -n "from folder " >> $SETUP_LOG
pwd >> $SETUP_LOG
echo -n "Starting OCS Inventory NG Management server setup from folder "
pwd
echo "Storing log in file $SETUP_LOG" >> $SETUP_LOG
echo "Storing log in file $SETUP_LOG"
echo >> $SETUP_LOG

echo "============================================================" >> $SETUP_LOG
echo "Checking OCS Inventory NG Management Server requirements..." >> $SETUP_LOG 
echo "============================================================" >> $SETUP_LOG
echo
echo "+----------------------------------------------------------+"
echo "| Checking for database server properties...               |"
echo "+----------------------------------------------------------+"
echo
# Check mysql client distribution version
echo "Checking for database server properties" >> $SETUP_LOG
DB_CLIENT_MAJOR_VERSION=`eval mysql -V | cut -d' ' -f6 | cut -d'.' -f1` >> $SETUP_LOG 2>&1
DB_CLIENT_MINOR_VERSION=`eval mysql -V | cut -d' ' -f6 | cut -d'.' -f2` >> $SETUP_LOG 2>&1
echo "Your MySQL client seems to be part of MySQL version $DB_CLIENT_MAJOR_VERSION.$DB_CLIENT_MINOR_VERSION."
echo "MySQL client distribution version $DB_CLIENT_MAJOR_VERSION.$DB_CLIENT_MINOR_VERSION." >> $SETUP_LOG
# Ensure mysql distribution is 4.1 or higher
if [ $DB_CLIENT_MAJOR_VERSION -gt 4 ]
then
    res=1
else
    if [ $DB_CLIENT_MAJOR_VERSION -eq 4 ]
    then
        if [ $DB_CLIENT_MINOR_VERSION -eq 1 ]
        then
            res=1
        else
            res=0
        fi
    else
        res=0
    fi
fi
if [ $res -eq 0 ]
then
    # Not 4.1 or higher, ask user to contnue ?
    echo "Your computer does not seem to be compliant with MySQL 4.1 or higher."
    echo -n "Do you wish to continue (y/[n])?"
    read ligne
    if [ "$ligne" = "y" ]
    then
        echo "Ensure your database server is running MySQL 4.1 or higher !"
        echo "Ensure also this computer is able to connect to your MySQL server !"
    else
        echo "Installation aborted !"
        exit 1
    fi
else
    echo "Your computer seems to be running MySQL 4.1 or higher, good ;-)"
    echo "Computer seems to be running MySQL 4.1 or higher" >> $SETUP_LOG
fi
echo

# Ask user for database server host
res=0
while [ $res -eq 0 ]
do
    echo -n "Which host is running database server [$DB_SERVER_HOST] ?"
    read ligne
    if [ -z "$ligne" ]
    then
        res=1
    else
        DB_SERVER_HOST="$ligne"
        res=1
    fi
done
echo "OK, database server is running on host $DB_SERVER_HOST ;-)"
echo "Database server is running on host $DB_SERVER_HOST" >> $SETUP_LOG
echo

# Ask user for database server port
res=0
while [ $res -eq 0 ]
do
    echo -n "On which port is running database server [$DB_SERVER_PORT] ?"
    read ligne
    if [ -z "$ligne" ]
    then
        res=1
    else
        DB_SERVER_PORT="$ligne"
        res=1
    fi
done
echo "OK, database server is running on port $DB_SERVER_PORT ;-)"
echo "Database server is running on port $DB_SERVER_PORT" >> $SETUP_LOG
echo

echo
echo "+----------------------------------------------------------+"
echo "| Checking for Apache web server daemon...                 |"
echo "+----------------------------------------------------------+"
echo
echo "Checking for Apache web server daemon" >> $SETUP_LOG
# Try to find Apache daemon
if [ -z "$APACHE_BIN" ]
then
    APACHE_BIN_FOUND=`which httpd 2>/dev/null`
    if [ -z "$APACHE_BIN_FOUND" ]
    then
        APACHE_BIN_FOUND=`which apache 2>/dev/null`
        if [ -z "$APACHE_BIN_FOUND" ]
        then
            APACHE_BIN_FOUND=`which apache2 2>/dev/null`
            if [ -z "$APACHE_BIN_FOUND" ]
            then
		APACHE_BIN_FOUND=`which httpd2 2>/dev/null`
            fi
	fi
    fi
fi
echo "Found Apache daemon $APACHE_BIN_FOUND" >> $SETUP_LOG
# Ask user's confirmation 
res=0
while [ $res -eq 0 ]
do
    echo -n "Where is Apache daemon binary [$APACHE_BIN_FOUND] ?"
    read ligne
    if [ -z "$ligne" ]
    then
        APACHE_BIN=$APACHE_BIN_FOUND
    else
        APACHE_BIN="$ligne"
    fi
    # Ensure file exists and is executable
    if [ -x $APACHE_BIN ]
    then
        res=1
    else
        echo "*** ERROR: $APACHE_BIN is not executable !"
        res=0
    fi
    # Ensure file is not a directory
    if [ -d $APACHE_BIN ]
    then 
        echo "*** ERROR: $APACHE_BIN is a directory !"
        res=0
    fi
done
echo "OK, using Apache daemon $APACHE_BIN ;-)"
echo "Using Apache daemon $APACHE_BIN" >> $SETUP_LOG
echo

echo
echo "+----------------------------------------------------------+"
echo "| Checking for Apache main configuration file...           |"
echo "+----------------------------------------------------------+"
echo
# Try to find Apache main configuration file
echo "Checking for Apache main configuration file" >> $SETUP_LOG
if [ -z "$APACHE_CONFIG_FILE" ]
then
    APACHE_ROOT=`eval $APACHE_BIN -V | grep "HTTPD_ROOT" | cut -d'=' -f2 | tr -d '"'`
    echo "Found Apache HTTPD_ROOT $APACHE_ROOT" >> $SETUP_LOG
    APACHE_CONFIG=`eval $APACHE_BIN -V | grep "SERVER_CONFIG_FILE" | cut -d'=' -f2 | tr -d '"'`
    echo "Found Apache SERVER_CONFIG_FILE $APACHE_CONFIG" >> $SETUP_LOG
    if [ -e $APACHE_CONFIG ]
    then
        APACHE_CONFIG_FILE_FOUND="$APACHE_CONFIG"
    else
        APACHE_CONFIG_FILE_FOUND="$APACHE_ROOT/$APACHE_CONFIG"
    fi
fi
echo "Found Apache main configuration file $APACHE_CONFIG_FILE_FOUND" >> $SETUP_LOG
# Ask user's confirmation 
res=0
while [ $res -eq 0 ]
do
    echo -n "Where is Apache main configuration file [$APACHE_CONFIG_FILE_FOUND] ?"
    read ligne
    if [ -z "$ligne" ]
    then
        APACHE_CONFIG_FILE=$APACHE_CONFIG_FILE_FOUND
    else
        APACHE_CONFIG_FILE="$ligne"
    fi
    # Ensure file is not a directory
    if [ -d $APACHE_CONFIG_FILE ]
    then 
        echo "*** ERROR: $APACHE_CONFIG_FILE is a directory !"
        res=0
    fi
    # Ensure file exists and is readable
    if [ -r $APACHE_CONFIG_FILE ]
    then
        res=1
    else
        echo "*** ERROR: $APACHE_CONFIG_FILE is not readable !"
        res=0
    fi
done
echo "OK, using Apache main configuration file $APACHE_CONFIG_FILE ;-)"
echo "Using Apache main configuration file $APACHE_CONFIG_FILE" >> $SETUP_LOG
echo

echo
echo "+----------------------------------------------------------+"
echo "| Checking for Apache user account...                      |"
echo "+----------------------------------------------------------+"
echo
# Try to find Apache main configuration file
echo "Checking for Apache user account" >> $SETUP_LOG
if [ -z "$APACHE_USER" ]
then
    case $UNIX_DISTRIBUTION in
	"debian")
    		if [ -f /etc/apache2/envvars ]; then
        	. /etc/apache2/envvars
		fi
        	APACHE_USER_FOUND=$APACHE_RUN_USER
		;;
	"suse")
		if [ -f /etc/apache2/uid.conf ]
		then
			APACHE_USER_FOUND=`cat /etc/apache2/uid.conf | grep "User" | tail -1 | cut -d' ' -f2`
		fi
		;;
	"redhat")
        	APACHE_USER_FOUND=`cat $APACHE_CONFIG_FILE | grep "User " | tail -1 | cut -d' ' -f2`
		;;
    esac
fi
echo "Found Apache user account $APACHE_USER_FOUND" >> $SETUP_LOG
# Ask user's confirmation 
res=0
while [ $res -eq 0 ]
do
    echo -n "Which user account is running Apache web server [$APACHE_USER_FOUND] ?"
    read ligne
    if [ -z "$ligne" ]
    then
        APACHE_USER=$APACHE_USER_FOUND
    else
        APACHE_USER="$ligne"
    fi
    # Ensure group exist in /etc/passwd
    if [ `cat /etc/passwd | grep $APACHE_USER | wc -l` -eq 0 ]
    then
        echo "*** ERROR: account $APACHE_USER not found in system table /etc/passwd !"
    else
        res=1
    fi
done
echo "OK, Apache is running under user account $APACHE_USER ;-)"
echo "Using Apache user account $APACHE_USER" >> $SETUP_LOG
echo

echo
echo "+----------------------------------------------------------+"
echo "| Checking for Apache group...                             |"
echo "+----------------------------------------------------------+"
echo
# Try to find Apache main configuration file
echo "Checking for Apache group" >> $SETUP_LOG
if [ -z "$APACHE_GROUP" ]
then
    case $UNIX_DISTRIBUTION in
	"debian")
    		if [ -f /etc/apache2/envvars ]; then
        	. /etc/apache2/envvars
		fi
        	APACHE_GROUP_FOUND=$APACHE_RUN_USER
		;;
	"suse")
		if [ -f /etc/apache2/uid.conf ]
		then
			APACHE_GROUP_FOUND=`cat /etc/apache2/uid.conf | grep "Group" | tail -1 | cut -d' ' -f2`
		fi
		;;
	"redhat")
        	APACHE_GROUP_FOUND=`cat $APACHE_CONFIG_FILE | grep "Group " | tail -1 | cut -d' ' -f2`
		;;
    esac

    if [ -z "$APACHE_GROUP_FOUND" ]
    then
        # No group found, assume group name is the same as account
        echo "No Apache user group found, assuming group name is the same as user account" >> $SETUP_LOG
        APACHE_GROUP_FOUND=$APACHE_USER
    fi
fi
echo "Found Apache user group $APACHE_GROUP_FOUND" >> $SETUP_LOG
# Ask user's confirmation 
res=0
while [ $res -eq 0 ]
do
    echo -n "Which user group is running Apache web server [$APACHE_GROUP_FOUND] ?"
    read ligne
    if [ -z "$ligne" ]
    then
        APACHE_GROUP=$APACHE_GROUP_FOUND
    else
        APACHE_GROUP="$ligne"
    fi
    # Ensure group exist in /etc/group
    if [ `cat /etc/group | grep $APACHE_GROUP | wc -l` -eq 0 ]
    then
        echo "*** ERROR: group $APACHE_GROUP not found in system table /etc/group !"
    else
        res=1
    fi
done
echo "OK, Apache is running under users group $APACHE_GROUP ;-)"
echo "Using Apache user group $APACHE_GROUP" >> $SETUP_LOG
echo


echo
echo "+----------------------------------------------------------+"
echo "| Checking for Apache Include configuration directory...   |"
echo "+----------------------------------------------------------+"
echo
# Try to find Apache includes configuration directory
echo "Checking for Apache Include configuration directory" >> $SETUP_LOG
if [ -z "$APACHE_CONFIG_DIRECTORY" ]
then
    case $UNIX_DISTRIBUTION in
    "redhat")
    	# Works on RH/Fedora/CentOS
    	CONFIG_DIRECTORY_FOUND=`eval cat $APACHE_CONFIG_FILE | grep Include | grep conf.d |head -1 | cut -d' ' -f2 | cut -d'*' -f1`
    	if [ -n "$CONFIG_DIRECTORY_FOUND" ]
    	then
        	APACHE_CONFIG_DIRECTORY_FOUND="$APACHE_ROOT/$CONFIG_DIRECTORY_FOUND"
        	echo "Redhat compliant Apache Include configuration directory $CONFIG_DIRECTORY_FOUND" >> $SETUP_LOG
        fi
	;;
    "debian")
        # Works on Debian/Ubuntu
        CONFIG_DIRECTORY_FOUND=`eval cat $APACHE_CONFIG_FILE | grep Include | grep conf.d |head -1 | cut -d' ' -f2 | cut -d'[' -f1`
        if [ -n "$CONFIG_DIRECTORY_FOUND" ]
        then
            APACHE_CONFIG_DIRECTORY_FOUND="$APACHE_ROOT/$CONFIG_DIRECTORY_FOUND"
            echo "Debian compliant Apache Include configuration directory $CONFIG_DIRECTORY_FOUND" >> $SETUP_LOG
        fi
    	;;
    "suse")
	 # Works on SuSE/OpenSuSE
        CONFIG_DIRECTORY_FOUND=`eval cat $APACHE_CONFIG_FILE | grep conf.d | tail -1 | cut -d' ' -f4 | cut -d'/' -f1`
        if [ -n "$CONFIG_DIRECTORY_FOUND" ]
        then
                APACHE_CONFIG_DIRECTORY_FOUND="`dirname $APACHE_CONFIG_FILE`/$CONFIG_DIRECTORY_FOUND"
                echo "SuSE compliant Apache Include configuration directory $CONFIG_DIRECTORY_FOUND" >> $SETUP_LOG
        fi
	;;
    *)
	# No compliant include configuration
	APACHE_CONFIG_DIRECTORY_FOUND=""
	echo "No compliant Apache Include configuration directory found" >> $SETUP_LOG
	;;
    esac
fi
echo "Found Apache Include configuration directory $APACHE_CONFIG_DIRECTORY_FOUND" >> $SETUP_LOG
# Ask user's confirmation 
echo "Setup found Apache Include configuration directory in"
echo "$APACHE_CONFIG_DIRECTORY_FOUND."
echo "Setup will put OCS Inventory NG Apache configuration in this directory."
res=0
while [ $res -eq 0 ]
do
    echo -n "Where is Apache Include configuration directory [$APACHE_CONFIG_DIRECTORY_FOUND] ?"
    read ligne
    if [ -z "$ligne" ]
    then
        APACHE_CONFIG_DIRECTORY=$APACHE_CONFIG_DIRECTORY_FOUND
    else
        APACHE_CONFIG_DIRECTORY="$ligne"
    fi
    # Ensure file is a directory
    if [ -d $APACHE_CONFIG_DIRECTORY ]
    then
        res=1
    else
        echo "*** ERROR: $APACHE_CONFIG_DIRECTORY is not a directory !"
        res=0
    fi
    # Ensure directory exists and is writable
    if [ -w $APACHE_CONFIG_DIRECTORY ]
    then
        res=1
    else
        echo "*** ERROR: $APACHE_CONFIG_DIRECTORY is not writable !"
        res=0
    fi
done
echo "OK, Apache Include configuration directory $APACHE_CONFIG_DIRECTORY found ;-)"
echo "Using Apache Include configuration directory $APACHE_CONFIG_DIRECTORY" >> $SETUP_LOG
echo


echo
echo "+----------------------------------------------------------+"
echo "| Checking for PERL Interpreter...                         |"
echo "+----------------------------------------------------------+"
echo
echo "Checking for PERL Interpreter" >> $SETUP_LOG
if [ -z "$PERL_BIN" ]
then
    echo "PERL Interpreter not found !"
    echo "PERL Interpreter not found" >> $SETUP_LOG
    echo "OCS Inventory NG is not able to work without PERL Interpreter."
    echo "Setup manually PERL first."
    echo "Installation aborted !"
    echo "installation aborted" >> $SETUP_LOG
    exit 1
else
    echo "Found PERL Intrepreter at <$PERL_BIN> ;-)"
    echo "Found PERL Intrepreter at <$PERL_BIN>" >> $SETUP_LOG
fi
# Ask user's confirmation 
res=0
while [ $res -eq 0 ]
do
    echo -n "Where is PERL Intrepreter binary [$PERL_BIN] ?"
    read ligne
    if [ -n "$ligne" ]
    then
        PERL_BIN="$ligne"
    fi
    # Ensure file exists and is executable
    if [ -x $PERL_BIN ]
    then
        res=1
    else
        echo "*** ERROR: $PERL_BIN is not executable !"
        res=0
    fi
    # Ensure file is not a directory
    if [ -d $PERL_BIN ]
    then 
        echo "*** ERROR: $PERL_BIN is a directory !"
        res=0
    fi
done
echo "OK, using PERL Intrepreter $PERL_BIN ;-)"
echo "Using PERL Intrepreter $PERL_BIN" >> $SETUP_LOG
echo


echo
echo -n "Do you wish to setup Communication server on this computer ([y]/n)?"
read ligne
if [ -z "$ligne" ] || [ "$ligne" = "y" ] || [ "$ligne" = "Y" ]
then
    # Setting up Communication server
    echo >> $SETUP_LOG
    echo "============================================================" >> $SETUP_LOG
    echo "Installing Communication server" >> $SETUP_LOG
    echo "============================================================" >> $SETUP_LOG
    echo
    
    echo
    echo "+----------------------------------------------------------+"
    echo "| Checking for Make utility...                             |"
    echo "+----------------------------------------------------------+"
    echo
    echo "Checking for Make utility" >> $SETUP_LOG
    if [ -z "$MAKE" ]
    then
        echo "Make utility not found !"
        echo "Make utility not found" >> $SETUP_LOG
        echo "Setup is not able to build OCS Inventory NG Perl module."
        echo "Unable to build OCS Inventory NG Perl module !" >> $SETUP_LOG
        exit 1
    else
        echo "OK, Make utility found at <$MAKE> ;-)"
        echo "Make utility found at <$MAKE>" >> $SETUP_LOG
    fi
    echo

    echo "+----------------------------------------------------------+"
    echo "| Checking for Apache mod_perl version...                  |"
    echo "+----------------------------------------------------------+"
    echo
    echo "Checking for Apache mod_perl version 1.99_22 or higher"
    echo "Checking for Apache mod_perl version 1.99_22 or higher" >> $SETUP_LOG
    $PERL_BIN -mmod_perl2 -e 'print "mod_perl 1.99_22 or higher is available\n"' >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        # mod_perl 2 not found !
        echo "Checking for Apache mod_perl version 1.99_21 or previous"
        echo "Checking for Apache mod_perl version 1.99_21 or previous" >> $SETUP_LOG
        $PERL_BIN -mmod_perl -e 'print "mod_perl 1.99_21 or previous is available\n"' >> $SETUP_LOG 2>&1
        if [ $? -ne 0 ]
        then
            # mod_perl 1 not found => Ask user 
            res=0
            while [ $res -eq 0 ]
            do
                echo "Setup is unable to determine your Apache mod_perl version."
                echo "Apache must have module mod_perl enabled. As configuration differs from"
                echo "mod_perl 1.99_21 or previous AND mod_perl 1.99_22 or higher, Setup must"
                echo "know which release Apache is using."
                echo "You can find which release you are using by running the following command"
                echo "  - On RPM enabled OS, rpm -q mod_perl"
                echo "  - On DPKG enabled OS, dpkg -l libapache*-mod-perl*"
                echo "Enter 1 for mod_perl 1.99_21 or previous."
                echo "Enter 2 for mod_perl 1.99_22 and higher."
                echo -n "Which version of Apache mod_perl the computer is running ([1]/2) ?"
                read ligne
                if [ -z "$ligne" ]
                then
                    APACHE_MOD_PERL_VERSION=1
                else
                    APACHE_MOD_PERL_VERSION=$ligne
                fi
                res=1
            done
        else
            echo "Found that mod_perl version 1.99_21 or previous is available."
            APACHE_MOD_PERL_VERSION=1
        fi
    else
        echo "Found that mod_perl version 1.99_22 or higher is available."
        APACHE_MOD_PERL_VERSION=2
    fi
    if [ $APACHE_MOD_PERL_VERSION -eq 1 ]
    then
        echo "OK, Apache is using mod_perl version 1.99_21 or previous ;-)"
        echo "Using mod_perl version 1.99_21 or previous" >> $SETUP_LOG
    else
        echo "OK, Apache is using mod_perl version 1.99_22 or higher ;-)"
        echo "Using mod_perl version 1.99_22 or higher" >> $SETUP_LOG
    fi
    echo

    echo "+----------------------------------------------------------+"
    echo "| Checking for Communication server log directory...       |"
    echo "+----------------------------------------------------------+"
    echo
    echo "Checking for Communication server log directory" >> $SETUP_LOG
    # Ask user 
    res=0
    while [ $res -eq 0 ]
    do
        echo "Communication server can create detailled logs. This logs can be enabled"
        echo "by setting interger value of LOGLEVEL to 1 in Administration console"
        echo "menu Configuration."
        echo -n "Where to put Communication server log directory [$OCS_COM_SRV_LOG] ?"
        read ligne
        if [ -n "$ligne" ]
        then
            OCS_COM_SRV_LOG=$ligne
        fi
        res=1
    done
    echo "OK, Communication server will put logs into directory $OCS_COM_SRV_LOG ;-)"
    echo "Using $OCS_COM_SRV_LOG as Communication server log directory" >> $SETUP_LOG
    echo


    echo "+----------------------------------------------------------------------------+"
    echo "| Checking for Communication server plugins configuration directory...       |"
    echo "+----------------------------------------------------------------------------+"
    echo
    echo "Checking for Communication server plugins configuration directory" >> $SETUP_LOG
    # Ask user 
    res=0
    while [ $res -eq 0 ]
    do
        echo "Communication server need a directory for plugins configuration files. "
        echo -n "Where to put Communication server plugins configuration files [$OCS_COM_SRV_PLUGINS_CONFIG_DIR] ?"
        read ligne
        if [ -n "$ligne" ]
        then
            OCS_COM_SRV_PLUGINS_CONFIG_DIR=$ligne
        fi
        res=1
    done
    echo "OK, Communication server will put plugins configuration files into directory $OCS_COM_SRV_PLUGINS_CONFIG_DIR ;-)"
    echo "Using $OCS_COM_SRV_PLUGINS_CONFIG_DIR as Communication server plugins configuration directory" >> $SETUP_LOG
    echo


    echo "+-------------------------------------------------------------------+"
    echo "| Checking for Communication server plugins perl directory...       |"
    echo "+-------------------------------------------------------------------+"
    echo
    echo "Checking for Communication server perl directory" >> $SETUP_LOG
    # Ask user 
    res=0
    while [ $res -eq 0 ]
    do
        echo "Communication server need a directory for plugins Perl modules files."
        echo -n "Where to put Communication server plugins Perl modules files [$OCS_COM_SRV_PLUGINS_PERL_DIR] ?"
        read ligne
        if [ -n "$ligne" ]
        then
            OCS_COM_SRV_PLUGINS_PERL_DIR=$ligne
        fi
        res=1
    done
    echo "OK, Communication server will put plugins Perl modules files into directory $OCS_COM_SRV_PLUGINS_PERL_DIR ;-)"
    echo "Using $OCS_COM_SRV_PLUGINS_PERL_DIR as Communication server plugins perl directory" >> $SETUP_LOG
    echo
    
    # jump to communication server directory
    echo "Entering Apache sub directory" >> $SETUP_LOG
    
    # Check for required Perl Modules (if missing, please install before)
    #    - DBI 1.40 or higher
    #    - Apache::DBI 0.93 or higher
    #    - DBD::mysql 2.9004 or higher
    #    - Compress::Zlib 1.33 or higher
    #    - XML::Simple 2.12 or higher
    #    - Net::IP 1.21 or higher
    #
    echo
    echo "+----------------------------------------------------------+"
    echo "| Checking for required Perl Modules...                    |"
    echo "+----------------------------------------------------------+"
    echo
    REQUIRED_PERL_MODULE_MISSING=0
    DBI=0
    APACHE_DBI=0
    DBD_MYSQL=0
    COMPRESS_ZLIB=0
    XML_SIMPLE=0
    NET_IP=0
    echo "Checking for DBI PERL module..."
    echo "Checking for DBI PERL module" >> $SETUP_LOG
    $PERL_BIN -mDBI -e 'print "PERL module DBI is available\n"' >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: PERL module DBI is not installed !"
        REQUIRED_PERL_MODULE_MISSING=1
        DBI=1
    else
        echo "Found that PERL module DBI is available."
    fi
    echo "Checking for Apache::DBI PERL module..."
    echo "Checking for Apache::DBI PERL module" >> $SETUP_LOG
    $PERL_BIN -mApache::DBI -e 'print "PERL module Apache::DBI is available\n"' >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: PERL module Apache::DBI is not installed !"
        REQUIRED_PERL_MODULE_MISSING=1
        APACHE_DBI=1
    else
        echo "Found that PERL module Apache::DBI is available."
    fi
    echo "Checking for DBD::mysql PERL module..."
    echo "Checking for DBD::mysql PERL module" >> $SETUP_LOG
    $PERL_BIN -mDBD::mysql -e 'print "PERL module DBD::mysql is available\n"' >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: PERL module DBD::mysql is not installed !"
        REQUIRED_PERL_MODULE_MISSING=1
        DBD_MYSQL=1
    else
        echo "Found that PERL module DBD::mysql is available."
    fi
    echo "Checking for Compress::Zlib PERL module..."
    echo "Checking for Compress::Zlib PERL module" >> $SETUP_LOG
    $PERL_BIN -mCompress::Zlib -e 'print "PERL module Compress::Zlib is available\n"' >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: PERL module Compress::Zlib is not installed !"
        REQUIRED_PERL_MODULE_MISSING=1
        COMPRESS_ZLIB=1
    else
        echo "Found that PERL module Compress::Zlib is available."
    fi
    echo "Checking for XML::Simple PERL module..."
    echo "Checking for XML::Simple PERL module" >> $SETUP_LOG
    $PERL_BIN -mXML::Simple -e 'print "PERL module XML::Simple is available\n"' >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: PERL module XML::Simple is not installed !"
        REQUIRED_PERL_MODULE_MISSING=1
        XML_SIMPLE=1
    else
        echo "Found that PERL module XML::Simple is available."
    fi
    echo "Checking for Net::IP PERL module..."
    echo "Checking for Net::IP PERL module" >> $SETUP_LOG
    $PERL_BIN -mNet::IP -e 'print "PERL module Net::IP is available\n"' >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: PERL module Net::IP is not installed !"
        REQUIRED_PERL_MODULE_MISSING=1
        NET_IP=1
    else
        echo "Found that PERL module Net::IP is available."
    fi
    if [ $REQUIRED_PERL_MODULE_MISSING -ne 0 ]
    then
        echo "*** ERROR: There is one or more required PERL modules missing on your computer !"
        echo "Please, install missing PERL modules first."
        echo " "
	echo "OCS setup.sh can install perl module from packages for you"
	echo "The script will use the native package from your operating system like apt or rpm"
	echo -n "Do you wish to continue (y/[n])?"
	read ligne
	if [ "$ligne" = "y" ] || [ "$ligne" = "Y" ]
	then
            case $UNIX_DISTRIBUTION in
                 "redhat")
                     echo "RedHat based automatic installation"
                     if [ $DBI -eq 1 ]
                     then
                         PACKAGE="$PACKAGE perl-DBI"
                     fi
                     if [ $APACHE_DBI -eq 1 ]
                     then
                         PACKAGE="$PACKAGE perl-Apache-DBI"
                     fi
                     if [ $DBD_MYSQL -eq 1 ]
                     then
                         PACKAGE="$PACKAGE perl-DBD-MySQL"
                     fi
                     if [ $COMPRESS_ZLIB -eq 1 ]
                     then
                         PACKAGE="$PACKAGE perl-Compress-Zlib"
                     fi
                     if [ $XML_SIMPLE -eq 1 ]
                     then
                         PACKAGE="$PACKAGE perl-XML-Simple"
                     fi
                     if [ $NET_IP -eq 1 ]
                     then
                         PACKAGE="$PACKAGE perl-Net-IP"
                     fi
                     yum update
                     yum install $PACKAGE
                     if [ $? != 0 ]
                     then
                         echo "Installation aborted !"
			 echo "Installation script encounter problems to install packages !"
                         echo "One or more required PERL modules missing !" >> $SETUP_LOG
                         echo "Installation aborted" >> $SETUP_LOG
                         exit 1
		     fi
                     echo "All packages have been installed on this computer"
                     ;;

	         "debian") 
		     if [ -f /usr/bin/apt-get ]
    	             then
	 	         echo "Debian based automatic installation"
		         if [ $DBI -eq 1 ]
		         then
 			     PACKAGE="$PACKAGE libdbi-perl"
		         fi
		         if [ $APACHE_DBI -eq 1 ]
		         then
			     PACKAGE="$PACKAGE libapache-dbi-perl"
		         fi
		         if [ $DBD_MYSQL -eq 1 ]
		         then
			     PACKAGE="$PACKAGE libdbd-mysql-perl"
		         fi
		         if [ $COMPRESS_ZLIB -eq 1 ]
		         then
                	     PACKAGE="$PACKAGE libcompress-zlib-perl"
		         fi
		         if [ $XML_SIMPLE -eq 1 ]
		         then
                	     PACKAGE="$PACKAGE libxml-simple-perl"
		         fi
                         if [ $NET_IP -eq 1 ]
                         then
                	     PACKAGE="$PACKAGE libnet-ip-perl"
		         fi
		         apt-get update
		         apt-get install $PACKAGE
		         if [ $? -ne 0 ]
		         then
			     echo "Installation aborted !"
			     echo "Installation script encounter problems to install packages !"
			     echo "One or more required PERL modules missing !" >> $SETUP_LOG
            		     echo "Installation aborted" >> $SETUP_LOG
            		     exit 1
		        fi
                        echo "All packages have been installed on this computer"
                     else
			 echo "Installation aborted !"
			 echo "Installation script cannot run apt-get utility !"
			 echo "One or more required PERL modules missing !" >> $SETUP_LOG
            		 echo "Installation aborted" >> $SETUP_LOG
            		 exit 1
                     fi
                 ;;

                 *) 
                     echo "Installation aborted !"
                     echo "Installation script cannot find missing packages for your distribution"
                     echo "One or more required PERL modules missing !" >> $SETUP_LOG
                     echo "Installation aborted" >> $SETUP_LOG
            	     exit 1
                 ;; 
            esac 
        else
            echo "Installation aborted !"
            echo "Please, install missing PERL modules first."
            echo "One or more required PERL modules missing !" >> $SETUP_LOG
            echo "Installation aborted" >> $SETUP_LOG
            exit 1
        fi
    fi

    # Check for optional Perl Modules
    #    - SOAP::Lite 0.65, not required, used only in web service
    #    - XML::Entities 0.02, not required, used only in web service
    #
    echo
    echo "+----------------------------------------------------------+"
    echo "| Checking for optional Perl Modules...                    |"
    echo "+----------------------------------------------------------+"
    echo
    echo "Checking for SOAP::Lite PERL module..."
    echo "Checking for SOAP::Lite PERL module" >> $SETUP_LOG
    $PERL_BIN -mSOAP::Lite -e 'print "PERL module SOAP::Lite is available\n"' >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** Warning: PERL module SOAP::Lite is not installed !"
        echo "This module is only required by OCS Inventory NG SOAP Web Service."
        echo -n "Do you wish to continue ([y]/n] ?"
        read ligne
        if [ -z "$ligne" ] || [ "$ligne" = "y" ]
        then
            echo "User choose to continue setup without PERL module SOAP::Lite" >> $SETUP_LOG
        else
            echo
            echo "Installation aborted !"
            echo "User choose to abort installation !" >> $SETUP_LOG
            exit 1
        fi
    else
        echo "Found that PERL module SOAP::Lite is available."
    fi
    echo
    echo "Checking for Apache2::SOAP PERL module..."
    echo "Checking for Apache2::SOAP PERL module" >> $SETUP_LOG
    $PERL_BIN -mApache2::SOAP -e 'print "PERL module Apache2::SOAP is available\n"' >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** Warning: PERL module Apache2::SOAP is not installed !"
        echo "This module is only required by OCS Inventory NG SOAP Web Service."
        echo -n "Do you wish to continue ([y]/n] ?"
        read ligne
        if [ -z "$ligne" ] || [ "$ligne" = "y" ]
        then
            echo "User choose to continue setup without PERL module SOAP::Apache2" >> $SETUP_LOG
        else
            echo
            echo "Installation aborted !"
            echo "User choose to abort installation !" >> $SETUP_LOG
            exit 1
        fi
    else
        echo "Found that PERL module SOAP::Apache2 is available."
    fi
    echo "Checking for XML::Entities PERL module..."
    echo "Checking for XML::Entities PERL module" >> $SETUP_LOG
    $PERL_BIN -mXML::Entities -e 'print "PERL module XML::Entities is available\n"' >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** Warning: PERL module XML::Entities is not installed !"
        echo "This module is only required by OCS Inventory NG SOAP Web Service."
        echo -n "Do you wish to continue ([y]/n] ?"
        read ligne
        if [ -z "$ligne" ] || [ "$ligne" = "y" ]
        then
            echo "User choose to continue setup without PERL module XML::Entities" >> $SETUP_LOG
        else
            echo
            echo "Installation aborted !"
            echo "User choose to abort installation !" >> $SETUP_LOG
            exit 1
        fi
    else
        echo "Found that PERL module XML::Entities is available."
    fi
    echo


    echo
    echo "+----------------------------------------------------------+"
    echo "| OK, looks good ;-)                                       |"
    echo "|                                                          |"
    echo "| Configuring Communication server Perl modules...         |"
    echo "+----------------------------------------------------------+"
    echo
    echo "Configuring Communication server (perl Makefile.PL)" >> $SETUP_LOG
    cd "Apache"
    $PERL_BIN Makefile.PL
    if [ $? -ne 0 ]
    then
        echo -n "Warning: Prerequisites too old ! Do you wish to continue (y/[n])?"
        read ligne
        if [ "$ligne" = "y" ]
        then
            echo "Maybe Communication server will encounter problems. Continuing anyway."
            echo "Warning: Prerequisites too old ! Continuing anyway" >> $SETUP_LOG
        else
            echo "Installation aborted !"
            exit 1
        fi
    fi
    echo
    echo "+----------------------------------------------------------+"
    echo "| OK, looks good ;-)                                       |"
    echo "|                                                          |"
    echo "| Preparing Communication server Perl modules...           |"
    echo "+----------------------------------------------------------+"
    echo
    echo "Preparing Communication server Perl modules (make)" >> $SETUP_LOG
    $MAKE >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Prepare failed, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    
    echo
    echo "+----------------------------------------------------------+"
    echo "| OK, prepare finshed ;-)                                  |"
    echo "|                                                          |"
    echo "| Installing Communication server Perl modules...          |"
    echo "+----------------------------------------------------------+"
    echo
    echo "Installing Communication server Perl modules (make install)" >> $SETUP_LOG
    $MAKE install >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then 
        echo "*** ERROR: Install of Perl modules failed, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    cd ".."

    echo
    echo "+----------------------------------------------------------+"
    echo "| OK, Communication server Perl modules install finished;-)|"
    echo "|                                                          |"
    echo "| Creating Communication server log directory...           |"
    echo "+----------------------------------------------------------+"
    echo
    echo "Creating Communication server log directory $OCS_COM_SRV_LOG."
    echo "Creating Communication server log directory $OCS_COM_SRV_LOG" >> $SETUP_LOG
    mkdir -p $OCS_COM_SRV_LOG >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to create log directory, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    echo
    echo "Fixing Communication server log directory files permissions."
    echo "Fixing Communication server log directory permissions" >> $SETUP_LOG
    chown -R $APACHE_USER:$APACHE_GROUP $OCS_COM_SRV_LOG >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set log directory permissions, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    chmod -R gu+rwx $OCS_COM_SRV_LOG >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set log directory permissions, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    chmod -R o-w $OCS_COM_SRV_LOG >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set log directory permissions, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    # Log rotation, BSD style
    if [ -f $NEWSYSLOG_CONF_FILE ]
    then
        echo "*** WARNING Please configure log rotation for files in $OCS_COM_SRV_LOG"
    fi

    # Log rotation, Linux flavor
    if [ -d $LOGROTATE_CONF_DIR ]
    then
        echo "Configuring logrotate for Communication server."
        echo "Configuring logrotate (ed logrotate.ocsinventory-NG)" >> $SETUP_LOG
        cp etc/logrotate.d/$COM_SERVER_LOGROTATE_CONF_FILE logrotate.$COM_SERVER_LOGROTATE_CONF_FILE.local
        $PERL_BIN -pi -e "s#PATH_TO_LOG_DIRECTORY#$OCS_COM_SRV_LOG#g" logrotate.$COM_SERVER_LOGROTATE_CONF_FILE.local
        echo "******** Begin updated logrotate.$COM_SERVER_LOGROTATE_CONF_FILE.local ***********" >> $SETUP_LOG
        cat logrotate.$COM_SERVER_LOGROTATE_CONF_FILE.local >> $SETUP_LOG
        echo "******** End updated logrotate.COM_SERVER_LOGROTATE_CONF_FILE.local ***********" >> $SETUP_LOG
        echo "Removing old communication server logrotate file $LOGROTATE_CONF_DIR/ocsinventory-NG"
        echo "Removing old communication server logrotate file $LOGROTATE_CONF_DIR/ocsinventory-NG" >> $SETUP_LOG
        rm -f "$LOGROTATE_CONF_DIR/ocsinventory-NG"
        echo "Writing communication server logrotate to file $LOGROTATE_CONF_DIR/$COM_SERVER_LOGROTATE_CONF_FILE"
        echo "Writing communication server logrotate to file $LOGROTATE_CONF_DIR/$COM_SERVER_LOGROTATE_CONF_FILE" >> $SETUP_LOG
        cp -f logrotate.$COM_SERVER_LOGROTATE_CONF_FILE.local $LOGROTATE_CONF_DIR/$COM_SERVER_LOGROTATE_CONF_FILE >> $SETUP_LOG 2>&1
        if [ $? -ne 0 ]
        then
            echo "*** ERROR: Unable to configure log rotation, please look at error in $SETUP_LOG and fix !"
            echo
            echo "Installation aborted !"
            exit 1
        fi
    fi
    echo
    
    echo
    echo "+-----------------------------------------------------------------------------+"
    echo "| OK, Communication server log directory created ;-)                          |"
    echo "|                                                                             |"
    echo "| Creating Communication server plugins configuration directory...            |"
    echo "+-----------------------------------------------------------------------------+"
    echo
    echo "Creating Communication server plugins configuration directory $OCS_COM_SRV_PLUGINS_CONFIG_DIR."
    echo "Creating Communication server plugins configuration directory $OCS_COM_SRV_PLUGINS_CONFIG_DIR" >> $SETUP_LOG
    mkdir -p $OCS_COM_SRV_PLUGINS_CONFIG_DIR >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to create plugins confguration directory, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    echo

    echo
    echo "+-----------------------------------------------------------------------------+"
    echo "| OK, Communication server plugins configuration directory created ;-)        |"
    echo "|                                                                             |"
    echo "| Creating Communication server plugins Perl directory...                     |"
    echo "+-----------------------------------------------------------------------------+"
    echo
    echo "Creating Communication server plugins Perl directory $OCS_COM_SRV_PLUGINS_PERL_DIR."
    echo "Creating Communication server plugins Perl directory $OCS_COM_SRV_PLUGINS_PERL_DIR" >> $SETUP_LOG
    mkdir -p "$OCS_COM_SRV_PLUGINS_PERL_DIR/Apache/Ocsinventory/Plugins" >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to create plugins Perl directory, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    echo

    echo
    echo "+-------------------------------------------------------------------+"
    echo "| OK, Communication server plugins Perl directory created ;-)       |"
    echo "|                                                                   |"
    echo "| Now configuring Apache web server...                              |"
    echo "+-------------------------------------------------------------------+"
    echo
    echo "To ensure Apache loads mod_perl before OCS Inventory NG Communication Server,"
    echo "Setup can name Communication Server Apache configuration file"
    echo "'z-$COM_SERVER_APACHE_CONF_FILE' instead of '$COM_SERVER_APACHE_CONF_FILE'."
    echo "Do you allow Setup renaming Communication Server Apache configuration file"
    echo -n "to 'z-$COM_SERVER_APACHE_CONF_FILE' ([y]/n) ?"
    read ligne
    if [ -z $ligne ] || [ "$ligne" = "y" ] || [ "$ligne" = "Y" ]
    then
        echo "OK, using 'z-$COM_SERVER_APACHE_CONF_FILE' as Communication Server Apache configuration file"
        echo "OK, using 'z-$COM_SERVER_APACHE_CONF_FILE' as Communication Server Apache configuration file" >> $SETUP_LOG
        FORCE_LOAD_AFTER_PERL_CONF=1
    else
        echo "OK, using '$COM_SERVER_APACHE_CONF_FILE' as Communication Server Apache configuration file"
        echo "OK, using '$COM_SERVER_APACHE_CONF_FILE' as Communication Server Apache configuration file" >> $SETUP_LOG
        FORCE_LOAD_AFTER_PERL_CONF=0
    fi
    echo "Configuring Apache web server (file $COM_SERVER_APACHE_CONF_FILE)" >> $SETUP_LOG
    cp etc/ocsinventory/$COM_SERVER_APACHE_CONF_FILE $COM_SERVER_APACHE_CONF_FILE.local
    $PERL_BIN -pi -e "s#DATABASE_SERVER#$DB_SERVER_HOST#g" $COM_SERVER_APACHE_CONF_FILE.local
    $PERL_BIN -pi -e "s#DATABASE_PORT#$DB_SERVER_PORT#g" $COM_SERVER_APACHE_CONF_FILE.local
    $PERL_BIN -pi -e "s#VERSION_MP#$APACHE_MOD_PERL_VERSION#g" $COM_SERVER_APACHE_CONF_FILE.local
    $PERL_BIN -pi -e "s#PATH_TO_LOG_DIRECTORY#$OCS_COM_SRV_LOG#g" $COM_SERVER_APACHE_CONF_FILE.local
    $PERL_BIN -pi -e "s#PATH_TO_PLUGINS_CONFIG_DIRECTORY#$OCS_COM_SRV_PLUGINS_CONFIG_DIR#g" $COM_SERVER_APACHE_CONF_FILE.local
    $PERL_BIN -pi -e "s#PATH_TO_PLUGINS_PERL_DIRECTORY#$OCS_COM_SRV_PLUGINS_PERL_DIR#g" $COM_SERVER_APACHE_CONF_FILE.local
    echo "******** Begin updated $COM_SERVER_APACHE_CONF_FILE.local ***********" >> $SETUP_LOG
    cat $COM_SERVER_APACHE_CONF_FILE.local >> $SETUP_LOG
    echo "******** End updated $COM_SERVER_APACHE_CONF_FILE.local ***********" >> $SETUP_LOG
    echo "Removing old communication server configuration to file $APACHE_CONFIG_DIRECTORY/ocsinventory.conf"
    echo "Removing old communication server configuration to file $APACHE_CONFIG_DIRECTORY/ocsinventory.conf" >> $SETUP_LOG
    rm -f "$APACHE_CONFIG_DIRECTORY/ocsinventory.conf"
    if [ $FORCE_LOAD_AFTER_PERL_CONF -eq 1 ]
    then
        rm -f "$APACHE_CONFIG_DIRECTORY/$COM_SERVER_APACHE_CONF_FILE"
        echo "Writing communication server configuration to file $APACHE_CONFIG_DIRECTORY/z-$COM_SERVER_APACHE_CONF_FILE"
        echo "Writing communication server configuration to file $APACHE_CONFIG_DIRECTORY/z-$COM_SERVER_APACHE_CONF_FILE" >> $SETUP_LOG
        cp -f $COM_SERVER_APACHE_CONF_FILE.local $APACHE_CONFIG_DIRECTORY/z-$COM_SERVER_APACHE_CONF_FILE >> $SETUP_LOG 2>&1
        res=$?
        COM_SERVER_APACHE_CONF_FILE="z-$COM_SERVER_APACHE_CONF_FILE"
    else
        echo "Writing communication server configuration to file $APACHE_CONFIG_DIRECTORY/$COM_SERVER_APACHE_CONF_FILE"
        echo "Writing communication server configuration to file $APACHE_CONFIG_DIRECTORY/$COM_SERVER_APACHE_CONF_FILE" >> $SETUP_LOG
        cp -f $COM_SERVER_APACHE_CONF_FILE.local $APACHE_CONFIG_DIRECTORY/$COM_SERVER_APACHE_CONF_FILE >> $SETUP_LOG 2>&1
        res=$?
    fi
    if [ $res -ne 0 ]
    then
        echo "*** ERROR: Unable to write $APACHE_CONFIG_DIRECTORY/$COM_SERVER_APACHE_CONF_FILE, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    echo
    echo "+----------------------------------------------------------+"
    echo "| OK, Communication server setup sucessfully finished ;-)  |"
    echo "|                                                          |"
    echo "| Please, review $APACHE_CONFIG_DIRECTORY/$COM_SERVER_APACHE_CONF_FILE"
    echo "| to ensure all is good. Then restart Apache daemon.       |"
    echo "+----------------------------------------------------------+"
    echo
    echo "Leaving Apache directory" >> $SETUP_LOG
    echo "Communication server installation successfull" >> $SETUP_LOG
fi

echo
echo "Do you wish to setup Administration Server (Web Administration Console)"
echo -n "on this computer ([y]/n)?"
read ligne
if [ -z "$ligne" ] || [ "$ligne" = "y" ] || [ "$ligne" = "Y" ]
then
    # Install Administration server
    echo >> $SETUP_LOG
    echo "============================================================" >> $SETUP_LOG
    echo "Installing Administration server" >> $SETUP_LOG
    echo "============================================================" >> $SETUP_LOG
    
    echo
    echo "+----------------------------------------------------------+"
    echo "| Checking for Administration Server directories...        |"
    echo "+----------------------------------------------------------+"
    echo
    echo "CAUTION: Setup now install files in accordance with Filesystem Hierarchy"
    echo "Standard. So, no file is installed under Apache root document directory"
    echo "(Refer to Apache configuration files to locate it)."
    echo "If you're upgrading from OCS Inventory NG Server 1.01 and previous, YOU"
    echo "MUST REMOVE (or move) directories 'ocsreports' and 'download' from Apache"
    echo "root document directory."
    echo "If you choose to move directory, YOU MUST MOVE 'download' directory to"
    echo "Administration Server writable/cache directory (by default"
    echo "$ADM_SERVER_VAR_DIR), especialy if you use deployement feature."
    echo
    echo -n "Do you wish to continue ([y]/n)?"
    read ligne
    if [ -z "$ligne" ] || [ "$ligne" = "y" ] || [ "$ligne" = "Y" ]
    then
        echo "Assuming directories 'ocsreports' and 'download' removed from"
        echo "Apache root document directory."
        echo
    else
        echo "Installation aborted !"
        echo
        exit 1
    fi

    echo "Checking for Administration Server directories..." >> $SETUP_LOG
    echo "Where to copy Administration Server static files for PHP Web Console"
    echo -n "[$ADM_SERVER_STATIC_DIR] ?"
    read ligne
    if test -z $ligne
    then
       ADM_SERVER_STATIC_DIR=$ADM_SERVER_STATIC_DIR
    else
       ADM_SERVER_STATIC_DIR="$ligne"
    fi
    echo "OK, using directory $ADM_SERVER_STATIC_DIR to install static files ;-)"
    echo "Using directory $ADM_SERVER_STATIC_DIR for static files" >> $SETUP_LOG
    echo
    echo "Where to create writable/cache directories for deployement packages,"
    echo -n "administration console logs, IPDiscover and SNMP [$ADM_SERVER_VAR_DIR] ?"
    read ligne
    if test -z $ligne
    then
       ADM_SERVER_VAR_DIR=$ADM_SERVER_VAR_DIR
    else
       ADM_SERVER_VAR_DIR="$ligne"
    fi
    echo "OK, writable/cache directory is $ADM_SERVER_VAR_DIR ;-)"
    echo "Using $ADM_SERVER_VAR_DIR as writable/cache directory" >> $SETUP_LOG
    echo

    # Check for required Perl Modules (if missing, please install before)
    #    - DBI 1.40 or higher
    #    - DBD::mysql 2.9004 or higher
    #    - XML::Simple 2.12 or higher
    #    - Net::IP 1.21 or higher
    #
    echo
    echo "+----------------------------------------------------------+"
    echo "| Checking for required Perl Modules...                    |"
    echo "+----------------------------------------------------------+"
    echo
    REQUIRED_PERL_MODULE_MISSING=0
    echo "Checking for DBI PERL module..."
    echo "Checking for DBI PERL module" >> $SETUP_LOG
    $PERL_BIN -mDBI -e 'print "PERL module DBI is available\n"' >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: PERL module DBI is not installed !"
        REQUIRED_PERL_MODULE_MISSING=1
    else
        echo "Found that PERL module DBI is available."
    fi
    echo "Checking for DBD::mysql PERL module..."
    echo "Checking for DBD::mysql PERL module" >> $SETUP_LOG
    $PERL_BIN -mDBD::mysql -e 'print "PERL module DBD::mysql is available\n"' >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: PERL module DBD::mysql is not installed !"
        REQUIRED_PERL_MODULE_MISSING=1
    else
        echo "Found that PERL module DBD::mysql is available."
    fi
    echo "Checking for XML::Simple PERL module..."
    echo "Checking for XML::Simple PERL module" >> $SETUP_LOG
    $PERL_BIN -mXML::Simple -e 'print "PERL module XML::Simple is available\n"' >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: PERL module XML::Simple is not installed !"
        REQUIRED_PERL_MODULE_MISSING=1
    else
        echo "Found that PERL module XML::Simple is available."
    fi
    echo "Checking for Net::IP PERL module..."
    echo "Checking for Net::IP PERL module" >> $SETUP_LOG
    $PERL_BIN -mNet::IP -e 'print "PERL module Net::IP is available\n"' >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: PERL module Net::IP is not installed !"
        REQUIRED_PERL_MODULE_MISSING=1
    else
        echo "Found that PERL module Net::IP is available."
    fi
    if [ $REQUIRED_PERL_MODULE_MISSING -ne 0 ]
    then
        echo "*** ERROR: There is one or more required PERL modules missing on your computer !"
        echo "Please, install missing PERL modules first."
        echo "Installation aborted !"
        echo "One or more required PERL modules missing !" >> $SETUP_LOG
        echo "Installation aborted" >> $SETUP_LOG
        exit 1
    fi


    echo
    echo "+----------------------------------------------------------+"
    echo "| Installing files for Administration server...            |"
    echo "+----------------------------------------------------------+"
    echo
    echo "Creating PHP directory $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR."
    echo "Creating PHP directory $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR" >> $SETUP_LOG
    mkdir -p $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR >> $SETUP_LOG 2>&1
    if [ $? != 0 ]
    then
        echo "*** ERROR: Unable to create ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    echo "Copying PHP files to $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR."
    echo "Copying PHP files to $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR" >> $SETUP_LOG
    cp -Rf ocsreports/* $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/ >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to copy files in $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    echo "Fixing permissions on directory $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR."
    echo "Fixing permissions on directory $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR" >> $SETUP_LOG
    # Set PHP pages directory owned by root, group Apache
    chown -R root:$APACHE_GROUP $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set permissions on $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    # Set PHP pages writable by root only
    chmod -R go-w $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set permissions on ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    # Set database configuration file dbconfig.inc.php writable by Apache
    echo "Creating database configuration file $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php."
    echo "Creating database configuration file $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php" >> $SETUP_LOG
    rm -f $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php
    echo "<?php" >> $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php
    echo -n '$_SESSION["SERVEUR_SQL"]="' >> $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php
    echo -n "$DB_SERVER_HOST" >> $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php
    echo '";' >> $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php
    echo -n '$_SESSION["COMPTE_BASE"]="' >> $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php
    echo -n "$DB_SERVER_USER" >> $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php
    echo '";' >> $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php
    echo -n '$_SESSION["PSWD_BASE"]="' >> $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php
    echo -n "$DB_SERVER_PWD" >> $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php
    echo '";' >> $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php
    echo "?>" >> $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php
    chown root:$APACHE_GROUP $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php
    chmod g+w $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set permissions on $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/dbconfig.inc.php, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    echo "Creating IPDiscover directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_IPD_DIR."
    echo "Creating IPDiscover directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_IPD_DIR" >> $SETUP_LOG
    mkdir -p $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_IPD_DIR >> $SETUP_LOG 2>&1
    if [ $? != 0 ]
    then
        echo "*** ERROR: Unable to create $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_IPD_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    echo "Fixing permissions on directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_IPD_DIR."
    echo "Fixing permissions on directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_IPD_DIR" >> $SETUP_LOG
    # Set IPD area owned by root, group Apache
    chown -R root:$APACHE_GROUP $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_IPD_DIR >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set permissions on $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_IPD_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    # Set IPD area writable by root only
    chmod -R go-w $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_IPD_DIR >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set permissions on $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_IPD_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    # Set IPD area writable by Apache group
    chmod g+w $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_IPD_DIR >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set permissions on $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_IPD_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    #Create packages directory
    echo "Creating packages directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_PACKAGES_DIR."
    echo "Creating packages directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_PACKAGES_DIR" >> $SETUP_LOG
    mkdir -p $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_PACKAGES_DIR >> $SETUP_LOG 2>&1
    if [ $? != 0 ]
    then
        echo "*** ERROR: Unable to create ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_PACKAGES_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    echo "Fixing permissions on directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_PACKAGES_DIR."
    echo "Fixing permissions on directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_PACKAGES_DIR" >> $SETUP_LOG
    # Set package area owned by root, group Apache
    chown -R root:$APACHE_GROUP $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_PACKAGES_DIR >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set permissions on $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_PACKAGES_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    # Set package area writable by root and Apache group only
    chmod -R g+w,o-w $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_PACKAGES_DIR >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set permissions on $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_PACKAGES_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    # Create snmp custom mibs directory
    echo "Creating snmp mibs directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SNMP_DIR."
    echo "Creating snmp mibs directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SNMP_DIR" >> $SETUP_LOG
    mkdir -p $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SNMP_DIR >> $SETUP_LOG 2>&1
    if [ $? != 0 ]
    then
        echo "*** ERROR: Unable to create ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SNMP_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    echo "Fixing permissions on directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SNMP_DIR."
    echo "Fixing permissions on directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SNMP_DIR" >> $SETUP_LOG
    # Set snmp area owned by root, group Apache
    chown -R root:$APACHE_GROUP $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SNMP_DIR >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set permissions on $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SNMP_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    # Set snmp area writable by root and Apache group only
    chmod -R g+w,o-w $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SNMP_DIR >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set permissions on $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SNMP_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    # Create logs directory
    echo "Creating Administration server log files directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_LOGS_DIR."
    echo "Creating Administration server log files directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_LOGS_DIR" >> $SETUP_LOG
    mkdir -p $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_LOGS_DIR >> $SETUP_LOG 2>&1
    if [ $? != 0 ]
    then
        echo "*** ERROR: Unable to create ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_LOGS_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    echo "Fixing permissions on directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_LOGS_DIR."
    echo "Fixing permissions on directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_LOGS_DIR" >> $SETUP_LOG
    # Set log files area owned by root, group Apache
    chown -R root:$APACHE_GROUP $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_LOGS_DIR >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set permissions on $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_LOGS_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    # Set log files area writable by root and Apache group only
    chmod -R g+w,o-w $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_LOGS_DIR >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set permissions on $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_LOGS_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    echo "Creating Administration server scripts log files directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SCRIPTS_LOGS_DIR."
    echo "Creating Administration server scripts log files directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SCRIPTS_LOGS_DIR" >> $SETUP_LOG
    mkdir -p $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SCRIPTS_LOGS_DIR >> $SETUP_LOG 2>&1
    if [ $? != 0 ]
    then
        echo "*** ERROR: Unable to create ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SCRIPTS_LOGS_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    echo "Fixing permissions on directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SCRIPTS_LOGS_DIR."
    echo "Fixing permissions on directory $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SCRIPTS_LOGS_DIR" >> $SETUP_LOG
    # Set scripts log files area owned by root, group Apache
    chown -R root:$APACHE_GROUP $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SCRIPTS_LOGS_DIR >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set permissions on $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SCRIPTS_LOGS_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    # Set scripts log files area writable by root and Apache group only
    chmod -R g+w,o-w $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SCRIPTS_LOGS_DIR >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set permissions on $ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SCRIPTS_LOGS_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    echo "Configuring IPDISCOVER-UTIL Perl script."
    echo "Configuring IPDISCOVER-UTIL Perl script (ed ipdiscover-util.pl)" >> $SETUP_LOG
    cp binutils/ipdiscover-util.pl ipdiscover-util.pl.local >> $SETUP_LOG 2>&1
    $PERL_BIN -pi -e "s#localhost#$DB_SERVER_HOST#g" ipdiscover-util.pl.local
    $PERL_BIN -pi -e "s#3306#$DB_SERVER_PORT#g" ipdiscover-util.pl.local
#    echo "******** Begin updated ipdiscover-util.pl.local script ***********" >> $SETUP_LOG
#    cat ipdiscover-util.pl.local >> $SETUP_LOG
#    echo "******** End updated ipdiscover-util.pl.local script ***********" >> $SETUP_LOG
    echo "Installing IPDISCOVER-UTIL Perl script."
    echo "Installing IPDISCOVER-UTIL Perl script" >> $SETUP_LOG
    cp ipdiscover-util.pl.local $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/ipdiscover-util.pl >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to copy files in $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    echo "Fixing permissions on IPDISCOVER-UTIL Perl script."
    echo "Fixing permissions on IPDISCOVER-UTIL Perl script" >> $SETUP_LOG
    chown root:$APACHE_GROUP $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/ipdiscover-util.pl >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set permissions on $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    chmod gou+x $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR/ipdiscover-util.pl >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to set permissions on $ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    
    echo "Configuring Apache web server (file $ADM_SERVER_APACHE_CONF_FILE)" >> $SETUP_LOG
    cp etc/ocsinventory/$ADM_SERVER_APACHE_CONF_FILE $ADM_SERVER_APACHE_CONF_FILE.local
    $PERL_BIN -pi -e "s#OCSREPORTS_ALIAS#$ADM_SERVER_REPORTS_ALIAS#g" $ADM_SERVER_APACHE_CONF_FILE.local
    $PERL_BIN -pi -e "s#PATH_TO_OCSREPORTS_DIR#$ADM_SERVER_STATIC_DIR/$ADM_SERVER_STATIC_REPORTS_DIR#g" $ADM_SERVER_APACHE_CONF_FILE.local
    $PERL_BIN -pi -e "s#IPD_ALIAS#$ADM_SERVER_IPD_ALIAS#g" $ADM_SERVER_APACHE_CONF_FILE.local
    $PERL_BIN -pi -e "s#PATH_TO_IPD_DIR#$ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_IPD_DIR#g" $ADM_SERVER_APACHE_CONF_FILE.local
    $PERL_BIN -pi -e "s#PACKAGES_ALIAS#$ADM_SERVER_PACKAGES_ALIAS#g" $ADM_SERVER_APACHE_CONF_FILE.local
    $PERL_BIN -pi -e "s#PATH_TO_PACKAGES_DIR#$ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_PACKAGES_DIR#g" $ADM_SERVER_APACHE_CONF_FILE.local
    $PERL_BIN -pi -e "s#SNMP_ALIAS#$ADM_SERVER_SNMP_ALIAS#g" $ADM_SERVER_APACHE_CONF_FILE.local
    $PERL_BIN -pi -e "s#PATH_TO_SNMP_DIR#$ADM_SERVER_VAR_DIR/$ADM_SERVER_VAR_SNMP_DIR#g" $ADM_SERVER_APACHE_CONF_FILE.local
    echo "******** Begin updated $ADM_SERVER_APACHE_CONF_FILE.local ***********" >> $SETUP_LOG
    cat $ADM_SERVER_APACHE_CONF_FILE.local >> $SETUP_LOG
    echo "******** End updated $ADM_SERVER_APACHE_CONF_FILE.local ***********" >> $SETUP_LOG
    echo "Writing Administration server configuration to file $APACHE_CONFIG_DIRECTORY/$ADM_SERVER_APACHE_CONF_FILE"
    echo "Writing communication server configuration to file $APACHE_CONFIG_DIRECTORY/$ADM_SERVER_APACHE_CONF_FILE" >> $SETUP_LOG
    cp -f $ADM_SERVER_APACHE_CONF_FILE.local $APACHE_CONFIG_DIRECTORY/$ADM_SERVER_APACHE_CONF_FILE >> $SETUP_LOG 2>&1
    if [ $? -ne 0 ]
    then
        echo "*** ERROR: Unable to write $APACHE_CONFIG_DIRECTORY/$ADM_SERVER_APACHE_CONF_FILE, please look at error in $SETUP_LOG and fix !"
        echo
        echo "Installation aborted !"
        exit 1
    fi
    echo
    echo "+----------------------------------------------------------+"
    echo "| OK, Administration server installation finished ;-)      |"
    echo "|                                                          |"
    echo "| Please, review $APACHE_CONFIG_DIRECTORY/$ADM_SERVER_APACHE_CONF_FILE"
    echo "| to ensure all is good and restart Apache daemon.         |"
    echo "|                                                          |"
    echo "| Then, point your browser to http://server/$ADM_SERVER_REPORTS_ALIAS"
    echo "| to configure database server and create/update schema.   |"
    echo "+----------------------------------------------------------+"
    echo
    echo "Administration server installation successfull" >> $SETUP_LOG
fi

echo
echo "Setup has created a log file $SETUP_LOG. Please, save this file."
echo "If you encounter error while running OCS Inventory NG Management server,"
echo "we can ask you to show us his content !"
echo
echo "DON'T FORGET TO RESTART APACHE DAEMON !"
echo
echo "Enjoy OCS Inventory NG ;-)"
echo
exit 0
