<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="it_IT">
<context>
    <name>AboutDialog</name>
    <message>
        <location filename="../aboutdialog.cpp" line="28"/>
        <source>About KLog</source>
        <translation>About KLog</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="73"/>
        <source>You can also help us by sending bug reports or small code contributions, ideas or whatever you think may improve KLog.</source>
        <translation>Per aiutare puoi comunicare bug, fornire nuovo codice, idee o suggerimenti o qualsiasi altra cosa possa migliorare KLog.</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="74"/>
        <location filename="../aboutdialog.cpp" line="145"/>
        <source>Authors</source>
        <translation>Autori</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="35"/>
        <source>By</source>
        <translation>Da</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="38"/>
        <source>Please know that this is an BETA release and it may contain many bugs.&lt;br&gt;Backup your data before using this software!</source>
        <translation>Per favore tieni conto che questa è una versione BETA e pertanto può contenere molti bug.&lt;br&gt;Copia i tuoi dati prima di usare questo software!</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="46"/>
        <source>Author</source>
        <translation>Autore</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="40"/>
        <source>KLog has been fully rewritten from the 0.6.2 to be able to provide a cross-platform application that runs in the main operating systems (Linux, macOS &amp; Windows) and provide new functionalities that KLog was not providing.</source>
        <translation>Dalla versione 0.6.2 KLog è stato completamente riscritto per poter funzionare su tutti i principali sistemi operativi (Linux, MacOS &amp; Windows) oltre che nuove funzioni.</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="37"/>
        <source>KLog is a free logbook for hamradio operators.</source>
        <translation>KLog è un software libero per radioamatori.</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="42"/>
        <source>Please provide your review in KLog&apos;s eHam review page:</source>
        <translation>Per favore scrivi un tuo contributo sulla pagina commenti di KLog:</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="69"/>
        <source>today</source>
        <translation>oggi</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="69"/>
        <source>Main developer</source>
        <translation>Sviluppatore Senior</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="73"/>
        <source>KLog is developed by a very small team and you are invited to join!</source>
        <translation>Klog è sviluppato da un esiguo numero di programmatori e tu sei invitato a partecipare!</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="101"/>
        <source>KLog developers have included a feature that reports some user data to the KLog server with the sole purpose of identifying the number of installed versions, to focus development in one direction or another taking into account user&apos;s needs</source>
        <translation>Gli sviluppatori di KLog hanno inserito una funzione che trasmette alcuni dati utente al server di KLog con la sola finalità di contare le versioni effettivamente installate, per sviluppare KLog in modo più funzionale alle esigenze degli utenti</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="102"/>
        <source>At present, the data that is provided is the following:</source>
        <translation>Correntemente, i dati forniti sono i seguenti:</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="104"/>
        <source>Be aware that you can enable/disable this feature from the Misc tab in the Setup page</source>
        <translation>Tieni presente che puoi sempre abilitare/disabilitare questa funzione dalla tab Misc (Altro) della pagina di impostazioni</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="87"/>
        <source>Translators bring KLog into your language. They are really an important part of the KLog development team.</source>
        <translation>I traduttori realizzano una versione KLog specifica per la tua lingua. Sono pertanto una parte importante della squadra di sviluppo di KLog.</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="45"/>
        <source>Find more information and the latest release at</source>
        <translation>Cerca ulteriori informazioni e l&apos;ultima versione presso</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="73"/>
        <source>If you want to provide support you are welcome to join the</source>
        <translation>Se vuoi essere di aiuto sei benvenuto e puoi unirti alla</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="73"/>
        <location filename="../aboutdialog.cpp" line="87"/>
        <source>KLog development mailing list</source>
        <translation>Mailing list di sviluppo di KLog</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="73"/>
        <location filename="../aboutdialog.cpp" line="87"/>
        <source>!</source>
        <translation>!</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="87"/>
        <source>If KLog is still not in your language and you want to help us, you are welcome to contact us through the</source>
        <translation>Se KLog non è ancora disponibile nella tua lingua e vuoi essere di aiuto, sei benvenuto e puoi contattarci tramite</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="88"/>
        <location filename="../aboutdialog.cpp" line="146"/>
        <source>Translators</source>
        <translation>Traduttori</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="100"/>
        <source>Privacy advisory</source>
        <translation>Nota sul trattamento dei dati personali</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="103"/>
        <source>Callsign</source>
        <translation>Nominativo</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="103"/>
        <source>KLog version</source>
        <translation>Versione KLog</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="103"/>
        <source>Operating system</source>
        <translation>Sistema operativo</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="144"/>
        <source>KLog</source>
        <translation>KLog</translation>
    </message>
    <message>
        <location filename="../aboutdialog.cpp" line="147"/>
        <source>Privacy</source>
        <translation>Privacy</translation>
    </message>
</context>
<context>
    <name>CTYPage</name>
    <message>
        <location filename="../startwizard.cpp" line="914"/>
        <source>Country data download</source>
        <translation>Scarico dati Country</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="917"/>
        <source>KLog needs country data...</source>
        <translation>KLog ha bisogno di informazioni sui Country...</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="922"/>
        <source>&amp;Download</source>
        <translation>&amp;Scarica</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="923"/>
        <source>&amp;Ignore</source>
        <translation>&amp;Ignora</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="942"/>
        <source>Country data needed</source>
        <translation>Dati Country richiesti</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="945"/>
        <source>KLog uses the cty.csv file from http://www.country-files.com/ to get DXCC information.</source>
        <translation>KLog usa il file cty.cvs disponibile su http://www.country-files.com/ per acquisire le informazioni DXCC.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="947"/>
        <source>You need to download the cty.csv file if you want KLog to show you the countries, locator, ... of the QSOs you do.</source>
        <translation>E&apos; necessario scaricare il file cty.cvs se vuoi che KLog mostri countries, locator, ... relativi al QSO avvvenuto.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="949"/>
        <source>Click on Download to download now.</source>
        <translation>Clicca su Scarica per avviare lo scarico.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="1025"/>
        <source>KLog</source>
        <translation>KLog</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="1026"/>
        <source>I can&apos;t find the host. Please check your network and try again
Do you want to try again?</source>
        <translation>Non riesco a raggiungere l&apos;host. Per favore verifica la tua conenssione di rete e riprova
Vuoi fare un ulteriore tentativo?</translation>
    </message>
</context>
<context>
    <name>DXCCStatusWidget</name>
    <message>
        <location filename="../dxccstatuswidget.cpp" line="54"/>
        <source>Update</source>
        <translation>Aggiornamento</translation>
    </message>
    <message>
        <location filename="../dxccstatuswidget.cpp" line="283"/>
        <source>ID</source>
        <translation>ID</translation>
    </message>
    <message>
        <location filename="../dxccstatuswidget.cpp" line="283"/>
        <source>Entity</source>
        <translation>Collegamento</translation>
    </message>
</context>
<context>
    <name>DXClusterWidget</name>
    <message>
        <location filename="../dxcluster.cpp" line="70"/>
        <location filename="../dxcluster.cpp" line="527"/>
        <source>Click on Connect to connect to the DX-Cluster server</source>
        <translation>Clicca su Connetti per collegarti al server DX-Cluter</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="74"/>
        <location filename="../dxcluster.cpp" line="525"/>
        <source>Connect</source>
        <translation>Connetti</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="75"/>
        <location filename="../dxcluster.cpp" line="504"/>
        <location filename="../dxcluster.cpp" line="583"/>
        <location filename="../dxcluster.cpp" line="588"/>
        <source>Clear</source>
        <translation>Pulisce</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="150"/>
        <source>Click on connect to connect to the DX-Cluster</source>
        <translation>Clicca su Connetti per colelgarti al DX-Cluster</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="209"/>
        <source>Trying to connect to the server</source>
        <translation>Tentativo di connessione al server in corso</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="220"/>
        <location filename="../dxcluster.cpp" line="226"/>
        <location filename="../dxcluster.cpp" line="233"/>
        <source>KLog DXCluster</source>
        <translation>KLog DXCluster</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="221"/>
        <source>The host was not found. Please check:</source>
        <translation>Server host non trovato. Per favore verifica:</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="222"/>
        <source>- your network connection;
- the host name and port settings.</source>
        <translation>- la tua configurazione di rete; - il nome del server ed il numero di porta configurato.</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="227"/>
        <source>The connection was refused by the peer. Make sure the DXCluster server is running, and check that the host name and port settings are correct.</source>
        <translation>La conenssione è stata rifiutata lato server. Accertati che il server DXCluster sia in funzione, e controlla che il nome del server host e l&apos;impostazione delle porte sia corretto.</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="234"/>
        <source>The following error occurred: %1.</source>
        <translation>Errore appena rilevato: %1.</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="477"/>
        <source>Connected to server</source>
        <translation>Connesso al server</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="490"/>
        <location filename="../dxcluster.cpp" line="494"/>
        <location filename="../dxcluster.cpp" line="498"/>
        <source>KLog message</source>
        <translation>Messaggio KLog</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="490"/>
        <location filename="../dxcluster.cpp" line="494"/>
        <source>Enter your callsign to connect to the cluster:</source>
        <translation>Inserisci il nominativo di conenssione al cluster:</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="498"/>
        <source>Enter your password to connect to the cluster:
(Just hit enter for no password)</source>
        <translation>Inserisci la password di connessione al cluster:
(direttamente Invio per nessuna password)</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="503"/>
        <location filename="../dxcluster.cpp" line="582"/>
        <source>Disconnect</source>
        <translation>Scollega</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="507"/>
        <source>Not logged on, you may need to enter your callsign again.</source>
        <translation>Non collegato, forse devi inserire di nuono il nominativo.</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="511"/>
        <source>Enter here the commands to be sent to the DX-Cluster server</source>
        <translation>Scrivi direttamente i comandi da trasmettere al server DX-Cluster</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="521"/>
        <source>Connection closed by the server</source>
        <translation>Collegamento chiuso dal server</translation>
    </message>
    <message>
        <location filename="../dxcluster.cpp" line="587"/>
        <source>Send</source>
        <translation>Trasmetti</translation>
    </message>
</context>
<context>
    <name>DataProxy_SQLite</name>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="74"/>
        <source>Software version in DB is null</source>
        <translation>Versione software nel DB vuota</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="74"/>
        <source>No query failed</source>
        <translation>Nessuna query fallita</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="3957"/>
        <source>KLog DXCC</source>
        <translation>KLog-DXCC</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="3958"/>
        <source>All QSOs have been updated with a DXCC.</source>
        <translation>Tutti i QSO sono stati aggiornati su DXCC.</translation>
    </message>
</context>
<context>
    <name>DownLoadCTY</name>
    <message>
        <location filename="../downloadcty.cpp" line="64"/>
        <source>Download of cty.csv failed with the following error code: </source>
        <translation>Lo scarico di cty.csv è fallito generando il seguente codice errore: </translation>
    </message>
    <message>
        <location filename="../downloadcty.cpp" line="76"/>
        <source>Download of cty.csv done.</source>
        <translation>Scarico di cty.cvs completo.</translation>
    </message>
    <message>
        <location filename="../downloadcty.cpp" line="147"/>
        <source>There is already a cty.csv file in the folder but it will be replaced with the new one.</source>
        <translation>E&apos; già presente un file cty.cvs nella cartella ma sarà sovrascritto dal nuovo.</translation>
    </message>
    <message>
        <location filename="../downloadcty.cpp" line="177"/>
        <source>Could not open </source>
        <translation>Impossibile aprire </translation>
    </message>
    <message>
        <location filename="../downloadcty.cpp" line="177"/>
        <source> for writing.</source>
        <translation> in scrittura.</translation>
    </message>
</context>
<context>
    <name>FileManager</name>
    <message>
        <location filename="../filemanager.cpp" line="251"/>
        <location filename="../filemanager.cpp" line="571"/>
        <source>Writing ADIF file...</source>
        <translation>File ADIF in scrittura...</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="251"/>
        <location filename="../filemanager.cpp" line="571"/>
        <location filename="../filemanager.cpp" line="2778"/>
        <source>Abort writing</source>
        <translation>Scrittura annullata</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="2621"/>
        <source>Writing ADIF file...
 QSO: </source>
        <translation>File ADIF in scrittura...
 QSO: </translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="2629"/>
        <source>You have canceled the file export. The file will be removed and no data will be exported.</source>
        <translation>Hai annullato l&apos;operazione di export. Il file sarà rimosso e nessun dato sarà esportato.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="2629"/>
        <location filename="../filemanager.cpp" line="3753"/>
        <source>Do you still want to cancel?</source>
        <translation>Sei sicuro di voler annullare l&apos;operazione?</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="442"/>
        <location filename="../filemanager.cpp" line="3587"/>
        <source> QSO: </source>
        <translation> QSO: </translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="201"/>
        <source>The log that you have selected contains more than just one station callsign.</source>
        <translation>Il log scelto contiene più nominativi di stazione.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="201"/>
        <source>Please select the station callsing you want to export the log from:</source>
        <translation>Per favore scegli il nominativo di stazione che vuoi esportare dal log:</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="204"/>
        <source>Station Callsign:</source>
        <translation>Nominativo di stazione:</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="213"/>
        <source>Define Station Callsign</source>
        <translation>Imposta il nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="214"/>
        <source>You have selected no callsign. KLog will export QSOs without a station callsign defined and those with the call you are entering here.</source>
        <translation>Non hai scelto il nominativo di stazione. KLog esporterà I QSO senza un nominativo di stazione definito ed con il nominatativo qua indicato.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="214"/>
        <source>Enter the station callsign to use for this log or leave it empty for QSO without station callsign defined:</source>
        <translation>Scegli il nominativo di stazione di questo log o lascialo vuoto per i QSO senza nominativo definito:</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="442"/>
        <source>Exporting LoTW ADIF file...</source>
        <translation>Exportazione file LOTW ADIF...</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="2778"/>
        <source>Writing Cabrillo file...</source>
        <translation>File Cabrilo in scrittura...</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="2962"/>
        <source>KLog: Cabrillo Log Export not implemented</source>
        <translation>KLog: funzione di export di Log su Cabrillo non implementata</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="2963"/>
        <source>I am sorry but the Cabrillo Export To File feature has still not been implemented.</source>
        <translation>Spiacente, ma la funzione di esport del log su file Cabrillo non è stata ancora implementata.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="3095"/>
        <source>Reading LoTW file...</source>
        <translation>Lettura file LoTW...</translation>
    </message>
    <message>
        <source>There are more than one log in this logfile.
All logs will be imported in the current log.
Do you want to continue?</source>
        <translation type="vanished">Questo file di log contiene più di un singolo log. Se proseguo tutti i log saranno importati. Vuoi continuare?</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="3381"/>
        <source>Reading ADIF file...</source>
        <translation>File ADIF in lettura...</translation>
    </message>
    <message>
        <source>Importing ADIF file...
 QSO: </source>
        <translation type="vanished">Importazione file ADIF... QSO:</translation>
    </message>
    <message>
        <source>You have cancelled the file export. The file will be removed and no data will be exported.
Do you still want to cancel?</source>
        <translation type="vanished">Calcellazione file di esport.  Se prosegui il file sarà eliminato e nessun dato sarà esportato. Vuoi davvero effettuare l&apos;eliminazione?</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4759"/>
        <source>This QSO is not including the minimum data to consider a QSO as valid!.</source>
        <translation>Questo QSO non contiene le informazioni minime necessarie per essere considerato un QSO valido!.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4759"/>
        <source>Please edit the ADIF file and make sure that it include at least:</source>
        <translation>Per favore modifica il file ADIF ed inserisci al suo interno almeno:</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4759"/>
        <source>and</source>
        <translation>e</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4759"/>
        <source>This QSO had:</source>
        <translation>Questo QSO aveva:</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="3095"/>
        <location filename="../filemanager.cpp" line="3381"/>
        <source>Abort reading</source>
        <translation>Annullamento lettura</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="226"/>
        <source>No station callsign has been selected and therefore no log will be exported</source>
        <translation>Non hai scelto un nominativo di stazione e perciò nessun log sarà esportato</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="3334"/>
        <source>There is more than one log in this logfile.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="3334"/>
        <source>All logs will be imported into the current log.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="3334"/>
        <source>Do you want to continue?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="3587"/>
        <source>Importing ADIF file...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="3753"/>
        <source>You have cancelled the file import. The file will be removed and no data will be imported.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="3614"/>
        <source>It seems that there are some duplicated QSOs in the ADIF file you are importing. Do you want to continue? (Duped QSOs will not be imported)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4763"/>
        <source> - The band missing and the following call: </source>
        <translation>- La banda non è indicata ed il seguente nominativo: </translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4768"/>
        <source> - The call missing but was done at this time: </source>
        <translation>- Il nominativo non è indicato ma è stato effettuato all&apos;ora:</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4773"/>
        <source> - The mode missing and the following call: </source>
        <translation>- Il modo operativo non è indicato e il seguente nominativo:</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4778"/>
        <source> - The date missing and the following call: </source>
        <translation>- La data non è indicata ed il seguente nominativo:</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4783"/>
        <source> - The time missing and the following call: </source>
        <translation>- L&apos;ora non è indicata ed ils eguente nominativo:</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4788"/>
        <source>Do you want to continue with the current file?</source>
        <translation>Vuoi poroseguire sul seguente file?</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4792"/>
        <source>KLog: Not all required data found!</source>
        <translation>KLOg: Dati necessari mancanti!</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4816"/>
        <source>This log seems to lack of RST-TX information.</source>
        <translation>Questo log sembra non contenere informazioni RTS-TX.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4816"/>
        <location filename="../filemanager.cpp" line="4838"/>
        <source>Click on Yes to add a default 59 to all QSO with a similar problem.</source>
        <translation>Clicca su Sì per aggiungere un 59 come default a tutti i QSO con un problema simile.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4816"/>
        <location filename="../filemanager.cpp" line="4838"/>
        <source>If you select NO, the QSO may not be imported.</source>
        <translation>Se scegli NO, il QSO non sarà importato.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4817"/>
        <source>KLog: No RST TX found!</source>
        <translation>KLog: Non trovato RST TX!</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4838"/>
        <source>This log seems to lack of RST-RX information.</source>
        <translation>Questo log sembra non contenere informazioni RST-RX.</translation>
    </message>
    <message>
        <location filename="../filemanager.cpp" line="4840"/>
        <source>KLog: No RST RX found!</source>
        <translation>KLog: Non trovato RST TX!</translation>
    </message>
</context>
<context>
    <name>InfoWidget</name>
    <message>
        <location filename="../infowidget.cpp" line="48"/>
        <source>10M</source>
        <translation>10m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="49"/>
        <source>15M</source>
        <translation>15m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="50"/>
        <source>20M</source>
        <translation>20m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="51"/>
        <source>40M</source>
        <translation>40m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="52"/>
        <source>80M</source>
        <translation>80m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="53"/>
        <source>160M</source>
        <translation>160m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="54"/>
        <source>2M</source>
        <translation>2m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="55"/>
        <source>6M</source>
        <translation>6m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="56"/>
        <source>12M</source>
        <translation>12m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="57"/>
        <source>17M</source>
        <translation>17m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="58"/>
        <source>30M</source>
        <translation>30m</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="59"/>
        <source>70CM</source>
        <translation>70cm</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="74"/>
        <source>Continent</source>
        <translation>Contienente</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="78"/>
        <source>Prefix</source>
        <translation>Prefisso</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="82"/>
        <source>CQ</source>
        <translation>CQ</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="86"/>
        <source>ITU</source>
        <translation>ITU</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="90"/>
        <source>Short Path</source>
        <translation>Percorso breve</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="93"/>
        <source>Long Path</source>
        <translation>Percorso lungo</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="96"/>
        <location filename="../infowidget.cpp" line="101"/>
        <source>Degree</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Grad</source>
        <translation type="vanished">Gradi</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="314"/>
        <location filename="../infowidget.cpp" line="315"/>
        <source>Miles</source>
        <translation>Miglia</translation>
    </message>
    <message>
        <location filename="../infowidget.cpp" line="321"/>
        <location filename="../infowidget.cpp" line="322"/>
        <source>Km</source>
        <translation>Km</translation>
    </message>
</context>
<context>
    <name>IntroPage</name>
    <message>
        <location filename="../startwizard.cpp" line="141"/>
        <source>Welcome to KLog!</source>
        <translation>Benvenuto/a su KLog!</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="143"/>
        <source>Welcome to KLog! - brought to you under the terms of the GPL!</source>
        <translation>Benvenuto su KLog! -acquisito sotto i termini della licenza GPL!</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="151"/>
        <source>Welcome to KLog</source>
        <translation>Benvenuto su KLog</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="152"/>
        <source>This looks like it&apos;s the first time you&apos;ve run KLog on this computer.</source>
        <translation>Sembra questa sia la prima volta tu stia eseguendo KLog su questo computer.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="153"/>
        <source>KLog is a free hamradio logging program that can run on Linux macOS and Windows.</source>
        <translation>KLog è un software libero per radioamatori di memorizzazione log che gira su Linux MacOS e Windows.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="154"/>
        <source>It is designed to provide general purpose, DX and contest logging.</source>
        <translation>E&apos; progettato per un uso generico, DX e log di contest.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="155"/>
        <source>It supports QSL management, import and export of ADIF </source>
        <translation>Supporta l&apos;amministrazione di QSL, importa ed esporta in formato ADIF </translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="156"/>
        <source>and Cabrillo file formats and many other features...</source>
        <translation>ed il formato Cabrillo e molte altre caratteristiche...</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="157"/>
        <source>Before you can start using KLog, you will be asked to:</source>
        <translation>Prima che tu possa iniziare ad usare KLog, ti è richiesto di:</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="158"/>
        <source>Acknowledge to the terms of the license.</source>
        <translation>Conferma i termini di uso della licenza.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="159"/>
        <source>Download the DX entities information.</source>
        <translation>Scarica le informazioni DX.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="160"/>
        <source>Enter your callsign, CQ zone, etc. and main configuration.</source>
        <translation>Inserisci il tuo nominativo, zona CQ, ecc. e configura le impostazioni principali.</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="161"/>
        <source>Enjoy KLog and contact the development team if you have any suggestions!</source>
        <translation>Divertiti usando KLog e contatta liberamente lo staff di sviluppo per ogni suggerimento!</translation>
    </message>
</context>
<context>
    <name>LicPage</name>
    <message>
        <location filename="../startwizard.cpp" line="182"/>
        <source>KLog License information</source>
        <translation>KLog inofmrazioni sulla licenza</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="185"/>
        <source>Welcome to KLog!- brought to you under the terms of the GPL!</source>
        <translation>Benvenuto si KLog!- acquisito sotto il termini della licenza GPL!</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="826"/>
        <source>Acknowledge</source>
        <translation>Conferma</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="827"/>
        <source>Be aware that KLog is free software.</source>
        <translation>Attenzione che KLog è software libero.</translation>
    </message>
</context>
<context>
    <name>LogModel</name>
    <message>
        <location filename="../logmodel.cpp" line="105"/>
        <source>Date</source>
        <translation>Data</translation>
    </message>
    <message>
        <location filename="../logmodel.cpp" line="108"/>
        <source>Time</source>
        <translation>Ora</translation>
    </message>
    <message>
        <location filename="../logmodel.cpp" line="111"/>
        <source>QRZ</source>
        <translation>QRZ</translation>
    </message>
    <message>
        <location filename="../logmodel.cpp" line="114"/>
        <source>Band</source>
        <translation>Banda</translation>
    </message>
    <message>
        <location filename="../logmodel.cpp" line="117"/>
        <source>Mode</source>
        <translation>Modo</translation>
    </message>
    <message>
        <location filename="../logmodel.cpp" line="120"/>
        <source>RSTtx</source>
        <translation>RSTtx</translation>
    </message>
    <message>
        <location filename="../logmodel.cpp" line="123"/>
        <source>RSTrx</source>
        <translation>RSTrx</translation>
    </message>
    <message>
        <location filename="../logmodel.cpp" line="126"/>
        <source>Comment</source>
        <translation>Commento</translation>
    </message>
</context>
<context>
    <name>LogWindow</name>
    <message>
        <location filename="../logwindow.cpp" line="211"/>
        <source>QSL Send</source>
        <translation>Trasmetti QSL</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="223"/>
        <source>QSL Rcvd</source>
        <translation>Ricevi QSL</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="280"/>
        <source>&amp;Delete</source>
        <translation>&amp;Cancella</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="282"/>
        <source>Delete a QSO</source>
        <translation>Cancella un QSO</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="285"/>
        <source>&amp;Edit QSO</source>
        <translation>&amp;Modifica QSO</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="287"/>
        <source>Edit this QSO</source>
        <translation>Modifica questo QSO</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="290"/>
        <source>Via &amp;bureau</source>
        <translation>Via &amp;bureau</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="292"/>
        <source>Send this QSL via bureau</source>
        <translation>Trasmetti questa QSL via bureau</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="295"/>
        <source>D&amp;irect</source>
        <translation>D&amp;iretta</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="297"/>
        <source>Send this QSL via direct</source>
        <translation>Trasmetti questa QSL via diretta</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="300"/>
        <source>Via bureau</source>
        <translation>Via bureau</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="302"/>
        <source>QSL &amp;received via bureau</source>
        <translation>QSL &amp;ricevuta via bureau</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="305"/>
        <source>Direct</source>
        <translation>Diretta</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="307"/>
        <source>QSL received via direc&amp;t</source>
        <translation>QSL ricevuta cia diret&amp;ta</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="388"/>
        <source>You have requested to delete this QSO.</source>
        <translation>Hai richiesto di cancellare questo QSO.</translation>
    </message>
    <message>
        <location filename="../logwindow.cpp" line="389"/>
        <source>Are you sure?</source>
        <translation>Sei sicuro?</translation>
    </message>
</context>
<context>
    <name>MainWindow</name>
    <message>
        <location filename="../mainwindow.cpp" line="318"/>
        <source>&amp;Clear</source>
        <translation>&amp;Pulisce</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="194"/>
        <source>Recalculate</source>
        <translation>Ricalcola</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="195"/>
        <source>Click to recalculate the award status</source>
        <translation>Clicca per ricalcolare the award status</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="224"/>
        <source>Starting KLog</source>
        <translation>Avvio KLog</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="315"/>
        <location filename="../mainwindow.cpp" line="915"/>
        <location filename="../mainwindow.cpp" line="3085"/>
        <source>&amp;Add</source>
        <translation>&amp;Aggiunge</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="321"/>
        <source>Status bar...</source>
        <translation>Barra di stato...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="322"/>
        <source>DX Entity</source>
        <translation>DX Entity</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="325"/>
        <source>&amp;Log Window</source>
        <translation>Finestra &amp;Log</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="326"/>
        <source>&amp;Score Window</source>
        <translation>Finestra &amp;Punteggi</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="345"/>
        <location filename="../mainwindow.cpp" line="350"/>
        <source>MHz</source>
        <translation>MHz</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="434"/>
        <location filename="../mainwindow.cpp" line="3278"/>
        <location filename="../mainwindow.cpp" line="3987"/>
        <source>KLog</source>
        <translation>KLog</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="643"/>
        <source>Ready</source>
        <translation>Pronto</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="804"/>
        <source>An unexpected error ocurred when trying to add the QSO to your log. If the problem persists, please contact the developer for analysis: </source>
        <translation>Si è verificato un errore inaspettato durante il tentativo di aggiunta del QSL al tuo log.Se il problema continua, per favore contatta gli sviluppatori per ulteriori analisi: </translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1724"/>
        <source>Click on the prefix of the right entity or Cancel to correct.</source>
        <translation>Clicca sul prefisso del collegamento a destra o Cancella per correggere.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5728"/>
        <source>Log</source>
        <translation>Log</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2427"/>
        <location filename="../mainwindow.cpp" line="3154"/>
        <location filename="../mainwindow.cpp" line="3160"/>
        <location filename="../mainwindow.cpp" line="4567"/>
        <location filename="../mainwindow.cpp" line="5611"/>
        <location filename="../mainwindow.cpp" line="6917"/>
        <source>QRZ</source>
        <translation>QRZ</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6923"/>
        <source>Band</source>
        <translation>Banda</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6925"/>
        <source>Mode</source>
        <translation>Modo</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6913"/>
        <source>Date</source>
        <translation>Data</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6915"/>
        <source>Time</source>
        <translation>Ora</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2418"/>
        <location filename="../mainwindow.cpp" line="6919"/>
        <source>RSTtx</source>
        <translation>RSTtx</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2411"/>
        <location filename="../mainwindow.cpp" line="6921"/>
        <source>RSTrx</source>
        <translation>RSTrx</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5588"/>
        <location filename="../mainwindow.cpp" line="6927"/>
        <source>Comment</source>
        <translation>Commento</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2383"/>
        <source>QRZ of the QSO</source>
        <translation>QRZ del QSO</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1008"/>
        <location filename="../mainwindow.cpp" line="1723"/>
        <source>You have selected an entity:</source>
        <translation>Hai selezionato il commegamento:</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1008"/>
        <location filename="../mainwindow.cpp" line="1723"/>
        <source>that is different from the KLog proposed entity:</source>
        <translation>questo è diverso dal collegamento proposto da KLog:</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2384"/>
        <source>TX RST</source>
        <translation>TX RST</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2385"/>
        <source>RX RST</source>
        <translation>RX RST</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2386"/>
        <source>TX Exchange</source>
        <translation>TX Echange</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2387"/>
        <source>RX Exchange</source>
        <translation>RX Echange</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2388"/>
        <source>Band of the QSO</source>
        <translation>Banda del QSO</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2389"/>
        <source>Mode of the QSO</source>
        <translation>Modo del QSO</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2390"/>
        <source>Date of the QSO</source>
        <translation>Data del QSO</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2391"/>
        <source>Time of the QSO</source>
        <translation>Ora del QSO</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2394"/>
        <source>Add the QSO to the log</source>
        <translation>Aggiunge il QSO al log</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2398"/>
        <source>Input</source>
        <translation>Input</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2434"/>
        <source>STX</source>
        <translation>STX</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2441"/>
        <source>SRX</source>
        <translation>SRX</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2733"/>
        <source>NEW MULT</source>
        <translation>NEW MULT</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2972"/>
        <source>Ready...</source>
        <translation>Pronto...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3321"/>
        <source>Import an ADIF file into the current log.</source>
        <translation>Importa un file ADIF all&apos;interno del log corrente.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3341"/>
        <source>Export the current log to an ADIF logfile.</source>
        <translation>Esporta il log corrente su un file log ADIF.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3352"/>
        <source>Export all QSOs requesting QSLs to an ADIF file (e.g. to import it into a QSL tag printing program).</source>
        <translation>Esporta tutti i QSO che richiedono una QSL su file ADIF (ad esempio per importare su un programma di stampa QSL).</translation>
    </message>
    <message>
        <source>&amp;Export ADIF for LoTW...</source>
        <translation type="vanished">&amp;EsportaADIF per LoTW...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3357"/>
        <source>Export an ADIF file to be sent to LoTW. Remember to sign it with TQSL before uploading to LoTW!</source>
        <translation>Esporta un file ADIF da trasferire a LoTW. Ricorda anche di firmarlo con TQSL prima di trasferirlo a LoTW!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3364"/>
        <source>Print your log.</source>
        <translation>Stampa il tuo log.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3371"/>
        <source>Opens the data folder of KLog.</source>
        <translation>Apre la cartalla dati di KLog.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3388"/>
        <source>Go through the log reusing previous QSOs to fill missing information in other QSOs.</source>
        <translation>Procedi riutilizzando i dati del precedente QSO sul log per completare le informazioni mancanti in altri QSO.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3390"/>
        <source>Fill in DXCC data</source>
        <translation>Completa sui dati DXCC</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3393"/>
        <source>Go through the log filling QSOs without a DXCC defined.</source>
        <translation>Procedi riempiendo i QSO del log senza DXCC definito.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3399"/>
        <source>QSL tools...</source>
        <translation>Strumenti QSL...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3409"/>
        <source>Shows QSOs for which you should send your QSL and request the DX QSL.</source>
        <translation>Mostra i QSO per i quali è stata richiesta la QSL e richiedi la QSL del DX.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3420"/>
        <source>Shows the DX-QSL that has been requested or QSLs has been sent with no answer.</source>
        <translation>Mostra le QSL DX richieste oppure le QSL spedite ma senza ancora risposta.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3425"/>
        <source>Shows the DX-QSL that has been requested.</source>
        <translation>Mostra le QSL DX richieste.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3428"/>
        <source>LoTW tools...</source>
        <translation>Strumenti per LoTW...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3433"/>
        <source>Mark all non sent QSOs in this log as queued to be uploaded.</source>
        <translation>Marca tutti i QSO nel log come accodati per essere trasmessi.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3438"/>
        <source>Mark all non sent QSOs as queued to be uploaded.</source>
        <translation>Marca tutti i QSO non ancora trasmessi accodandoli per essere trasmessi.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3442"/>
        <source>Mark as sent all queued QSO of this log</source>
        <translation>Marca come già trasmessi tutti i QSOdi questo log in coda</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3445"/>
        <source>Mark all queued QSOs in this log as sent to LoTW.</source>
        <translation>Marca tutti i QSO del log in coda come strasmessi verso LoTW.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3447"/>
        <source>Mark all queued QSO as sent</source>
        <translation>Marca tutti i QSO in coda come trasmessi</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3459"/>
        <source>For updated DX-Entity data, update cty.csv.</source>
        <translation>Per le voci DX corrette, aggiorna cty.csv.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3522"/>
        <location filename="../mainwindow.cpp" line="3531"/>
        <location filename="../mainwindow.cpp" line="3545"/>
        <location filename="../mainwindow.cpp" line="3553"/>
        <location filename="../mainwindow.cpp" line="3627"/>
        <location filename="../mainwindow.cpp" line="3635"/>
        <location filename="../mainwindow.cpp" line="3653"/>
        <location filename="../mainwindow.cpp" line="3661"/>
        <source>KLog LoTW</source>
        <translation>KLog LoTW</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3523"/>
        <source>All pending QSO of this log has been marked as queued for LoTW!</source>
        <translation>Tutti i QSO del log sospesi stati marcati come accodati per LoTW!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3532"/>
        <location filename="../mainwindow.cpp" line="3554"/>
        <source>There was a problem to mark all pending QSO of this log as queued for LoTW!</source>
        <translation>C&apos;è stato un problema nel marcare tutti i QSOdel log sospesi per accodarli per LoTW!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3546"/>
        <source>All pending QSO has been marked as queued for LoTW!</source>
        <translation>Tutti i QSO sospesi sono stati marcati per essere messi in coda per LoTW!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3628"/>
        <source>All queued QSO of this log has been marked as sent for LoTW!</source>
        <translation>Tutti i QSO del log in coda sono stati marcati come trasmessi verso LoTW!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3636"/>
        <source>There was a problem to mark all queued QSO of this log as sent for LoTW!</source>
        <translation>C&apos;è stato un problema durante l&apos;operazione di marcatura di tutti i QSO di questo log in coda come trasmessi verso LowTW!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3573"/>
        <source>The log that you have selected contains more than just one station callsign.</source>
        <translation type="unfinished">Il log scelto contiene più nominativi di stazione.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3337"/>
        <source>Export to ADIF...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3343"/>
        <source>Export all logs to ADIF...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3349"/>
        <source>Export Requested QSL to ADIF...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3354"/>
        <source>Export ADIF for LoTW...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3523"/>
        <location filename="../mainwindow.cpp" line="3546"/>
        <source>Now you can go to the File menu to export the LoTW ADIF file and upload it to LoTW.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3573"/>
        <source>Please select the station callsing you want to mark as sent to LoTW:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3576"/>
        <source>Station Callsign:</source>
        <translation type="unfinished">Nominativo di stazione:</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3585"/>
        <source>Define Station Callsign</source>
        <translation type="unfinished">Imposta il nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3586"/>
        <source>You have selected no callsign. KLog will mark QSOs without a station callsign defined and those with the call you are entering here.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3586"/>
        <source>Enter the station callsign to use for this log or leave it empty for QSO without station callsign defined:</source>
        <translation type="unfinished">Scegli il nominativo di stazione di questo log o lascialo vuoto per i QSO senza nominativo definito:</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3599"/>
        <source>No station callsign has been selected and therefore no log will be marked</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3654"/>
        <source>All queued QSO has been marked as sent to LoTW!</source>
        <translation>Tutti i QSO sono stati marcati come trasmessi verso LoTW!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3662"/>
        <source>There was a problem to mark all queued QSO of this log as sent to LoTW!</source>
        <translation>C&apos;è stato un problema durante l&apos;operazione di marcatura di tutti i QSO di questo log come trasmessi verso LowTW!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3901"/>
        <source>Save File</source>
        <translation>Salva File</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3903"/>
        <source>ADIF file</source>
        <translation>File ADIF</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3903"/>
        <source>Cabrillo files</source>
        <translation>Files Cabrillo</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3903"/>
        <source>Any file</source>
        <translation>Tutti i file</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4909"/>
        <source>The selected log is not existing or it is still empty.</source>
        <translation>Il log scelto non esiste oppure è ancora vuoto.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4909"/>
        <source>Click Yes and KLog will open an empty log.</source>
        <translation>Clicca su Sì e Klog aprirà un nuovo log vuoto.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4910"/>
        <source>Click No and KLog will select another log with data.</source>
        <translation>Clocca su No e KLog sceglierà un altro log non vuoto.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4911"/>
        <source>You can modify the config file accordingly, if needed.</source>
        <translation>Puoi correggere il file di configurazione, se necessario.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5254"/>
        <source>TX Frequency in MHz.</source>
        <translation>Frequenza TX in MHz.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5255"/>
        <source>RX Frequency in MHz.</source>
        <translation>Frequenza RX in MHz.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5257"/>
        <source>Power used by the DX.</source>
        <translation>Potenza usata dal DX.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5258"/>
        <source>Logging operator&apos;s callsign.</source>
        <translation>Logging nominativo dell&apos;operatore.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5259"/>
        <source>Callsign used over the air.</source>
        <translation>Nominativo usato via etere.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5260"/>
        <source>My QTH locator.</source>
        <translation>Locator del mio QTH.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5261"/>
        <source>Name of the DX.</source>
        <translation>Nome del DX.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5262"/>
        <source>QTH of the DX.</source>
        <translation>QTX del DX.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5263"/>
        <source>Locator of the DX.</source>
        <translation>Locator del DX.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5265"/>
        <source>QRZ of the QSO.</source>
        <translation>QRZ del QSO.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5266"/>
        <source>TX RST.</source>
        <translation>TX RST.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5267"/>
        <source>RX RST.</source>
        <translation>RX RST.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5268"/>
        <source>TX Exchange.</source>
        <translation>TX Echange.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5269"/>
        <source>RX Exchange.</source>
        <translation>RX Echange.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5270"/>
        <source>Band of the QSO.</source>
        <translation>Banda del QSO.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5271"/>
        <source>Mode of the QSO.</source>
        <translation>Modo del QSO.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5272"/>
        <source>Date of the QSO.</source>
        <translation>Data del QSO.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5273"/>
        <source>Time of the QSO.</source>
        <translation>Ora del QSO.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5276"/>
        <source>Add the QSO to the log.</source>
        <translation>Aggiunge il SQL al log.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5278"/>
        <source>Clears the QSO entry.</source>
        <translation>Pulisce tutti i campi del QSO.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5303"/>
        <source>Number of confirmed DXCC entities.</source>
        <translation>Numero di collegamenti DXCC confermati.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5304"/>
        <source>Number of worked DXCC entities.</source>
        <translation>Numero di collegamento DXCC lavorati.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5305"/>
        <source>Number of confirmed WAZ zones.</source>
        <translation>Numero di zone WAZ confermate.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5306"/>
        <source>Number of worked WAZ zones.</source>
        <translation>Numero di zone WAZ lavorate.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5307"/>
        <source>Number of confirmed local references.</source>
        <translation>Numero di riferimenti locali confermati.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5308"/>
        <source>Number of worked local references.</source>
        <translation>Numero di riferimenti locali lavorari.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5309"/>
        <source>Number of confirmed QSOs.</source>
        <translation>Numero di QSO confermati.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5310"/>
        <source>Number of worked QSOs.</source>
        <translation>Numero di QSO lavorati.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5311"/>
        <source>Number of QSOs worked on the selected year.</source>
        <translation>Numero di QSOs lavorati durante l&apos;anno scelto.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5312"/>
        <source>Number of DXCC worked on the selected year.</source>
        <translation>Numero di DXCC lavorati durante l&apos;anno scelto.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5313"/>
        <source>Number of CQ Zones worked on the selected year.</source>
        <translation>Numero di zone CQ lavorate durante l&apos;anno scelto.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5314"/>
        <source>Score for the DXMarathon on the selected year.</source>
        <translation>Punteggio nella maratona DX per l&apos;anno scelto.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5315"/>
        <source>Select the year you want to check.</source>
        <translation>Scegli l&apos;anno che vuoi controllare.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5317"/>
        <source>Status of the DX entity.</source>
        <translation>Stato del collegamento DX.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5318"/>
        <source>Name of the DX entity.</source>
        <translation>Nome del collegamento DX.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="7552"/>
        <source>An unexpected error ocurred!!</source>
        <translation>Un errore imprevisto si è verificato!!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="7552"/>
        <source>If the problem persists, please contact the developers</source>
        <translation>Se il problema persiste, per favore contatta gli sviluppatori</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="7552"/>
        <source>for analysis:</source>
        <translation>per analisi:</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="7554"/>
        <source>Error in function</source>
        <translation>Errore nella funzione</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="7555"/>
        <source>Error code</source>
        <translation>Codice di errore</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="7556"/>
        <source>Error text</source>
        <translation>Testo descrittivo dell&apos;errore</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="7557"/>
        <source>Failed query</source>
        <translation>Richiesta fallita</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="7568"/>
        <source>Do you want to keep showing errors?</source>
        <translation>Vuoi mantenere visibili gli errori?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3279"/>
        <source>The logfile has been modified.
Do you want to save your changes?</source>
        <translation>Il file di log è stato modificato.
Vuoi salvare i cambiamenti?</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3306"/>
        <source>&amp;File</source>
        <translation>&amp;File</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3308"/>
        <source>&amp;New...</source>
        <translation>&amp;Nuovo...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3369"/>
        <source>KLog folder</source>
        <translation>Cartella KLog</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3313"/>
        <source>&amp;Open...</source>
        <translation>&amp;Apre...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3330"/>
        <source>&amp;Save As...</source>
        <translation>&amp;Salva Come...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3361"/>
        <source>&amp;Print Log...</source>
        <translation>&amp;Stampa Log...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3376"/>
        <source>E&amp;xit</source>
        <translation>E&amp;sce</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3382"/>
        <source>&amp;Tools</source>
        <translation>&amp;Strumenti</translation>
    </message>
    <message>
        <source>&amp;Export to ADIF...</source>
        <translation type="vanished">&amp;Esporta su ADIF...</translation>
    </message>
    <message>
        <source>&amp;Export all logs to ADIF...</source>
        <translation type="vanished">&amp;Esporta tutti i log su ADIF...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3318"/>
        <source>&amp;Import from ADIF...</source>
        <translation>&amp;Importa da ADIF...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3406"/>
        <source>&amp;Find QSO to QSL</source>
        <translation>&amp;Cerca QSO su QSL</translation>
    </message>
    <message>
        <source>&amp;Export Requested QSL to ADIF...</source>
        <translation type="vanished">&amp;Esporta QSL richieste su ADIF...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3347"/>
        <source>Export ALL the QSOs into one ADIF file, merging QSOs from all the logs.</source>
        <translation>Esporta TUTTI i QSO si un file ADIF,fondendo i QSO da tutti i log.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3384"/>
        <source>Fill in QSO data</source>
        <translation>Completa tutti i dati del QSL</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3411"/>
        <source>Find My-QSLs pending to send</source>
        <translation>Cerca le mie QSL in attesa di trasmissione</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3417"/>
        <source>&amp;Find DX-QSLs pending to receive</source>
        <translation>&amp;Cerca le QSL DX ancora da ricevere</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3422"/>
        <source>&amp;Find requested pending to receive</source>
        <translation>&amp;Cerca le QSL richieste in attesa di ricezione</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3430"/>
        <source>Queue all QSL to be sent of this log</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3435"/>
        <source>Queue all QSL to be sent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3450"/>
        <source>Mark all queued QSOs as sent to LoTW.</source>
        <translation>Marca tutti i QSO in coda per essere trasmessi verso LoTW.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3464"/>
        <source>&amp;Setup</source>
        <translation>&amp;Configurazione</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3466"/>
        <source>&amp;Setup...</source>
        <translation>&amp;Configurazione...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3472"/>
        <source>&amp;Help</source>
        <translation>&amp;Aiuto</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3474"/>
        <source>Check updates...</source>
        <translation>Controlla aggiornamenti...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3479"/>
        <source>&amp;About...</source>
        <translation>&amp;About...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3484"/>
        <source>About Qt...</source>
        <translation>About Qt...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3671"/>
        <source>About...</source>
        <translation>About...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3727"/>
        <source>KLog update checking result</source>
        <translation>KLog aggiorna risultati di controllo</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3728"/>
        <source>Congratulations!</source>
        <translation>Congratulazioni!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3728"/>
        <source>You already have the latest version.</source>
        <translation>Stai usando già la versione più recente.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3873"/>
        <location filename="../mainwindow.cpp" line="3923"/>
        <source>Nothing has been saved. You have to select a valid file type.</source>
        <translation>Nessun dato salvato. Devi scegliere un tipo di file valido.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3980"/>
        <source>You can find the KLog data folder here: </source>
        <translation>La cartella data di KLog si trova su: </translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4563"/>
        <source>DUPE</source>
        <translation>DUPLICA</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4947"/>
        <source>It seems that there are no QSO in the database.</source>
        <translation>Il database sembra non contenere alcun QSO.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="4947"/>
        <source>If you are sure that the database contains QSOs and KLog is not able to find them, please contact the developers (see About KLog) for help.</source>
        <translation>Se sei sicuro che il datbase contenga QSO anche se KLog non riesce a riconoscerli, per favore contatta gli sviluppatori (vedi la pagina About di KLog) per supporto.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5343"/>
        <source>Name</source>
        <translation>Nome</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5347"/>
        <source>QTH</source>
        <translation>QTH</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5350"/>
        <source>Locator</source>
        <translation>Locator</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5353"/>
        <source>Power(rx)</source>
        <translation>Potenza(rx)</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5357"/>
        <source>RST(tx)</source>
        <translation>RST(tx)</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5360"/>
        <source>RST(rx)</source>
        <translation>RST(rx)</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5393"/>
        <source>Freq TX</source>
        <translation>Frequenza TX</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5395"/>
        <source>Freq RX</source>
        <translation>Frequenza RX</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5469"/>
        <source>QSO</source>
        <translation>QSO</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5586"/>
        <source>QSL</source>
        <translation>QSL</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5587"/>
        <source>eQSL</source>
        <translation>eQSL</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5591"/>
        <source>Others</source>
        <translation>Altro</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5593"/>
        <source>My Data</source>
        <translation>Miei dati</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5594"/>
        <source>Satellite</source>
        <translation>Satellite</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5650"/>
        <source>CQ</source>
        <translation>CQ</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5649"/>
        <location filename="../mainwindow.cpp" line="5675"/>
        <location filename="../mainwindow.cpp" line="5731"/>
        <source>DXCC</source>
        <translation>DXCC</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="340"/>
        <source>Watts</source>
        <translation>Watt</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="1009"/>
        <source>Click on the prefix of the correct entity or Cancel to edit the QSO again.</source>
        <translation>Clicca sul prefisso del collegamento o su Cancella per ritornare a modificare i dati del QSO.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2396"/>
        <source>Clear the box</source>
        <translation>Pulisce il box</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="2830"/>
        <source>Invalid characters used in the QRZ</source>
        <translation>Caratteri non validi usati nel campo QRZ</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3415"/>
        <source>Shows the QSOs with pending requests to send QSLs. You should keep this queue empty!</source>
        <translation>Mostra i QSO con richieste di invio QSL in attesa. Questo elenco dovrebbe essere sempre vuoto!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="3455"/>
        <source>&amp;Update cty.csv</source>
        <translation>&amp;Aggiorna cty.csv</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5651"/>
        <source>Score</source>
        <translation>Punteggio</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5652"/>
        <source>DX-Marathon</source>
        <translation>Maratona DX</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5661"/>
        <source>Info</source>
        <translation>Informazioni</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5666"/>
        <source>Award</source>
        <translation>Premi</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5669"/>
        <source>Confirmed</source>
        <translation>confermate</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5672"/>
        <source>Worked</source>
        <translation>Lavorato</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5678"/>
        <source>WAZ</source>
        <translation>WAZ</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5681"/>
        <source>Local</source>
        <translation>Locale</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5648"/>
        <location filename="../mainwindow.cpp" line="5684"/>
        <source>QSOs</source>
        <translation>QSO</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5725"/>
        <source>Awards</source>
        <translation>Premi</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5726"/>
        <source>Search</source>
        <translation>Cerca</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5730"/>
        <source>DX-Cluster</source>
        <translation>DX-Cluster</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5826"/>
        <location filename="../mainwindow.cpp" line="5837"/>
        <location filename="../mainwindow.cpp" line="5911"/>
        <location filename="../mainwindow.cpp" line="5921"/>
        <source>Save ADIF File</source>
        <translation>Salva file ADIF</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5847"/>
        <source>LoTW logfile has been properly exported!</source>
        <translation>Il file di log LoTW è stato correttamente esportato!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5847"/>
        <source>Remember to:</source>
        <translation>Ricorda a:</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5847"/>
        <source>Before uploading: sign the LoTW log; and</source>
        <translation>Prima di trasmettere: firma il log LoTW; e</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5847"/>
        <source>After uploading: mark as sent all the queued QSO (LoTW Tools).</source>
        <translation>Dopo la trasmissione: marca come trasmessi tutti i QSO in coda (Strumenti LoTW).</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5868"/>
        <source>There was no QSO to be exported.</source>
        <translation>Non ci sono QSO da esportare.</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5868"/>
        <source>If you think that some QSO should have been exported, please look for them and ensure that the eQSL LoTW QSL sent box is marked as:</source>
        <translation>Se pensi che specifici QSO debbano essere esportati, per favore controllali bene e verifica che il check-box eQSL LoTW QSL sia marcato come:</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5868"/>
        <source>Q - Queued</source>
        <translation>Q - In coda</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5889"/>
        <source>There was an error while exporting the LoTW. The log has not been exported!</source>
        <translation>C&apos;è stato un errore durante l&apos;export del LoTW. Il log non è stato esportato!</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5935"/>
        <source>Save Cabrillo File</source>
        <translation>Salva file Cabrillo</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5937"/>
        <source>Cabrillo (*.log)</source>
        <translation>Cabrillo (*.log)</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="5946"/>
        <location filename="../mainwindow.cpp" line="5970"/>
        <source>Open File</source>
        <translation>Apre File</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6066"/>
        <source>&amp;Modify</source>
        <translation>&amp;Modifica</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6601"/>
        <source>--</source>
        <translation>--</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6626"/>
        <source> - Needed for DXMarathon</source>
        <translation> - Necessario per maratone DX</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6733"/>
        <source>Filling QSOs...</source>
        <translation>Completamento QSO...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6733"/>
        <source>Abort filling</source>
        <translation>Abort filling</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6851"/>
        <source>Filling QSOs...
 QSO: </source>
        <translation>Filling QSO...
 QSO: </translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6911"/>
        <source>Number</source>
        <translation>Numero</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6940"/>
        <source>Print Log</source>
        <translation>Stampa Log</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6945"/>
        <source>Printing the log...</source>
        <translation>Log in stampa...</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6945"/>
        <source>Abort printing</source>
        <translation>Annulla stampa</translation>
    </message>
    <message>
        <location filename="../mainwindow.cpp" line="6960"/>
        <location filename="../mainwindow.cpp" line="6975"/>
        <source>Printing the log...
 QSO: </source>
        <translation>Stampa del log...
 QSO: </translation>
    </message>
</context>
<context>
    <name>MainWindowInputComment</name>
    <message>
        <location filename="../mainwindowinputcomment.cpp" line="46"/>
        <source>Add a comment for this QSO</source>
        <translation>Aggiunge un commento a questo QSO</translation>
    </message>
</context>
<context>
    <name>MainWindowInputEQSL</name>
    <message>
        <location filename="../mainwindowinputeqsl.cpp" line="44"/>
        <source>Date of the ClubLog upload.</source>
        <translation>Data del Clublog scaricata.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputeqsl.cpp" line="45"/>
        <source>Date of the eQSL sending.</source>
        <translation>Date of the eQSL sending.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputeqsl.cpp" line="46"/>
        <source>Date of the eQSL reception.</source>
        <translation>Date of the eQSL reception.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputeqsl.cpp" line="47"/>
        <source>Date of the LoTW sending.</source>
        <translation>Data della trasmissione LoTW.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputeqsl.cpp" line="48"/>
        <source>Date of the LoTW reception.</source>
        <translation>Data della ricezione LoTW.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputeqsl.cpp" line="53"/>
        <source>Status of the LoTW sending.</source>
        <translation>Stato della trasmissione LoTW.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputeqsl.cpp" line="54"/>
        <source>Status of the LoTW reception.</source>
        <translation>Stato della ricezione LoTW.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputeqsl.cpp" line="67"/>
        <source>LoTW Sent</source>
        <translation>Trasmissione LoTW</translation>
    </message>
    <message>
        <location filename="../mainwindowinputeqsl.cpp" line="70"/>
        <source>LoTW Rec</source>
        <translation>Registrazione LoTW</translation>
    </message>
    <message>
        <location filename="../mainwindowinputeqsl.cpp" line="50"/>
        <source>Status on ClubLog.</source>
        <translation>Stato su ClubLog.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputeqsl.cpp" line="51"/>
        <source>Status of the eQSL sending.</source>
        <translation>Stato della spedizione delle eQSL.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputeqsl.cpp" line="52"/>
        <source>Status of the eQSL reception.</source>
        <translation>Stato della ricezione di eQSL.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputeqsl.cpp" line="58"/>
        <source>ClubLog</source>
        <translation>ClubLog</translation>
    </message>
    <message>
        <location filename="../mainwindowinputeqsl.cpp" line="61"/>
        <source>eQSL Sent</source>
        <translation>Invio eQSL</translation>
    </message>
    <message>
        <location filename="../mainwindowinputeqsl.cpp" line="64"/>
        <source>eQSL Rec</source>
        <translation>Registrazione eQSL</translation>
    </message>
</context>
<context>
    <name>MainWindowInputOthers</name>
    <message>
        <location filename="../mainwindowinputothers.cpp" line="66"/>
        <source>Primary Div</source>
        <translation>Primary Div</translation>
    </message>
    <message>
        <location filename="../mainwindowinputothers.cpp" line="67"/>
        <source>Secondary Div</source>
        <translation>Secondary Div</translation>
    </message>
    <message>
        <location filename="../mainwindowinputothers.cpp" line="68"/>
        <source>IOTA</source>
        <translation>IOTA</translation>
    </message>
    <message>
        <location filename="../mainwindowinputothers.cpp" line="69"/>
        <source>Entity</source>
        <translation>Collegamento</translation>
    </message>
    <message>
        <location filename="../mainwindowinputothers.cpp" line="70"/>
        <source>Propagation mode</source>
        <translation>Modo di propagazione</translation>
    </message>
    <message>
        <location filename="../mainwindowinputothers.cpp" line="78"/>
        <source>Select the primary division for this QSO</source>
        <translation>Seleziona la primary division di questo QSO</translation>
    </message>
    <message>
        <location filename="../mainwindowinputothers.cpp" line="79"/>
        <source>Select the secondary division for this QSO</source>
        <translation>Seleziona la secondary division di questo QSO</translation>
    </message>
    <message>
        <location filename="../mainwindowinputothers.cpp" line="80"/>
        <source>Select the entity for this QSO</source>
        <translation>Seleziona il collegamento di questo QSO</translation>
    </message>
    <message>
        <location filename="../mainwindowinputothers.cpp" line="81"/>
        <source>Select the propagation mode for this QSO</source>
        <translation>Seleziona il modo di propagazione di questo QSO</translation>
    </message>
    <message>
        <location filename="../mainwindowinputothers.cpp" line="82"/>
        <source>Select the IOTA continent for this QSO</source>
        <translation>Seleziona il continente IOTA di questo QSO</translation>
    </message>
    <message>
        <location filename="../mainwindowinputothers.cpp" line="83"/>
        <source>Select the IOTA reference number for this QSO</source>
        <translation>Seleziona il numero di riferimento IOTA di questo QSO</translation>
    </message>
    <message>
        <location filename="../mainwindowinputothers.cpp" line="108"/>
        <location filename="../mainwindowinputothers.cpp" line="150"/>
        <source>Not Identified</source>
        <translation>Non identificato</translation>
    </message>
    <message>
        <location filename="../mainwindowinputothers.cpp" line="114"/>
        <source>Not - Not Identified</source>
        <translation>No - Non identificato</translation>
    </message>
</context>
<context>
    <name>MainWindowInputQSL</name>
    <message>
        <location filename="../mainwindowinputqsl.cpp" line="66"/>
        <source>QSL Sent</source>
        <translation>Invio QSL</translation>
    </message>
    <message>
        <location filename="../mainwindowinputqsl.cpp" line="69"/>
        <source>QSL Rec</source>
        <translation>QSL Rec</translation>
    </message>
    <message>
        <location filename="../mainwindowinputqsl.cpp" line="72"/>
        <source>QSL Via</source>
        <translation>QSL Via</translation>
    </message>
    <message>
        <location filename="../mainwindowinputqsl.cpp" line="75"/>
        <source>QSL Msg</source>
        <translation>QSL Message</translation>
    </message>
    <message>
        <location filename="../mainwindowinputqsl.cpp" line="78"/>
        <source>Status of the QSL sending.</source>
        <translation>Stato QSL in trasmissione.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputqsl.cpp" line="79"/>
        <source>Status of the QSL reception.</source>
        <translation>Stato QSL in ricezione.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputqsl.cpp" line="80"/>
        <source>QSL sending information.</source>
        <translation>Informazioni invio QSL.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputqsl.cpp" line="81"/>
        <source>QSL reception information.</source>
        <translation>Informazioni ricezione QSL.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputqsl.cpp" line="83"/>
        <source>Date of the QSL sending.</source>
        <translation>Data invio QSL.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputqsl.cpp" line="84"/>
        <source>Date of the QSL reception.</source>
        <translation>Data ricezione QSL.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputqsl.cpp" line="85"/>
        <source>Message of the QSL.</source>
        <translation>Messaggio sulla QSL.</translation>
    </message>
    <message>
        <location filename="../mainwindowinputqsl.cpp" line="86"/>
        <source>QSL via information.</source>
        <translation>Informazioni su Via QSL.</translation>
    </message>
</context>
<context>
    <name>MainWindowMyDataTab</name>
    <message>
        <location filename="../mainwindowmydatatab.cpp" line="61"/>
        <source>Watt</source>
        <translation>Watt</translation>
    </message>
    <message>
        <location filename="../mainwindowmydatatab.cpp" line="64"/>
        <source>Keep this data</source>
        <translation>Mantieni questa data</translation>
    </message>
    <message>
        <location filename="../mainwindowmydatatab.cpp" line="66"/>
        <location filename="../mainwindowmydatatab.cpp" line="68"/>
        <source>Data entered in this tab will be copied into the next QSO</source>
        <translation>La data inserita in questa tab sarà usata per il prossimo QSO</translation>
    </message>
    <message>
        <location filename="../mainwindowmydatatab.cpp" line="70"/>
        <source>Power used for the QSO in watts</source>
        <translation>Potenza usata per il QSL in watt</translation>
    </message>
    <message>
        <location filename="../mainwindowmydatatab.cpp" line="71"/>
        <source>Logging operator&apos;s callsign</source>
        <translation>Logging nominativo dell&apos;operatore</translation>
    </message>
    <message>
        <location filename="../mainwindowmydatatab.cpp" line="72"/>
        <source>Callsign used over the air</source>
        <translation>Nominativo usato via etere</translation>
    </message>
    <message>
        <location filename="../mainwindowmydatatab.cpp" line="73"/>
        <source>My QTH locator</source>
        <translation>Locator del mio QTH</translation>
    </message>
    <message>
        <location filename="../mainwindowmydatatab.cpp" line="75"/>
        <source>Power</source>
        <translation>Potenza</translation>
    </message>
    <message>
        <location filename="../mainwindowmydatatab.cpp" line="78"/>
        <source>Operator</source>
        <translation>Operatore</translation>
    </message>
    <message>
        <location filename="../mainwindowmydatatab.cpp" line="80"/>
        <source>Station Callsign</source>
        <translation>Nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../mainwindowmydatatab.cpp" line="83"/>
        <source>My Locator</source>
        <translation>Il mio Locator</translation>
    </message>
</context>
<context>
    <name>MainWindowSatTab</name>
    <message>
        <location filename="../mainwindowsattab.cpp" line="78"/>
        <source>Keep this data</source>
        <translation>Mantieni questa data</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="80"/>
        <location filename="../mainwindowsattab.cpp" line="82"/>
        <source>Data entered in this tab will be copied into the next QSO</source>
        <translation>La data usata in questa tab sarà usata per il prossimo QSO</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="89"/>
        <source>Satellite mode used</source>
        <translation>Usata. modalità satellite</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="90"/>
        <source>Select the satellite you are using</source>
        <translation>Seleziona il satellite che stai usando</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="91"/>
        <source>UpLink band</source>
        <translation>Banda uplink</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="92"/>
        <source>DownLink band</source>
        <translation>Banda downlink</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="93"/>
        <source>Locator of the DX station. This box will is syncronized with the Locator box in the QSO tab.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="96"/>
        <source>UpLink</source>
        <translation>Uplink</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="100"/>
        <source>DownLink</source>
        <translation>Downlink</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="104"/>
        <source>Satellite</source>
        <translation>Satellite</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="108"/>
        <source>Mode</source>
        <translation>Modo</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="112"/>
        <source>DX Locator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="117"/>
        <source>Other</source>
        <translation>Altro</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="123"/>
        <location filename="../mainwindowsattab.cpp" line="127"/>
        <source>MHz</source>
        <translation>MHz</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="366"/>
        <source>Not Sat QSO</source>
        <translation>QSO non satellitare</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="403"/>
        <source>KLog has detected a satellite name that it does not recognise. If it should use one of the names of known satellites instead, please select it from the list. Alternatively, please contact the development team to add the new satellite name.</source>
        <translation>KLog ha trovato un nome di satellite non riconosciuto. Se hai bisogno di usare un nome di satellite conosciuto invece, selezionalo dalla lista. In alternativa, per favore contatta lo staff di sviluppo per aggiungere il nuovo nome di satellite.</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="404"/>
        <source>Please know that the satellite name will not be saved if it is not in the list so that information may be lost!</source>
        <translation>Teni gentilmente presente che il nome del satellite non sarà salvato se assente dalla lista così quest&apos;informazione andrà persa!</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="83"/>
        <location filename="../mainwindowsattab.cpp" line="367"/>
        <source>Other - Sat not in the list</source>
        <translation>Altro - Satellite assente dalla lista</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="86"/>
        <source>Name of the Satellite if not in the list. Select: &quot;</source>
        <translation>Nome del satellite assente dalla lista. Seleziona: &quot;</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="86"/>
        <source>&quot; to enable this box. (format like AO-51)</source>
        <translation>&quot; per abilitare questo box. (formato come AO-51)</translation>
    </message>
    <message>
        <location filename="../mainwindowsattab.cpp" line="404"/>
        <source>The satellite you have in your QSO is: </source>
        <translation>Il satellite del tuo QSO è: </translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <location filename="../awards.cpp" line="664"/>
        <source>New One, work it!</source>
        <translation>Nuovo, work it!</translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="668"/>
        <location filename="../awards.cpp" line="672"/>
        <location filename="../awards.cpp" line="678"/>
        <location filename="../awards.cpp" line="681"/>
        <location filename="../awards.cpp" line="684"/>
        <location filename="../awards.cpp" line="687"/>
        <location filename="../awards.cpp" line="693"/>
        <location filename="../awards.cpp" line="699"/>
        <source>Needed, work it!</source>
        <translation>Necessario, work it!</translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="675"/>
        <location filename="../awards.cpp" line="690"/>
        <location filename="../awards.cpp" line="696"/>
        <location filename="../awards.cpp" line="702"/>
        <source>Worked but not confirmed</source>
        <translation>Lavorato ma non confermato</translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="705"/>
        <source>Confirmed</source>
        <translation>Confermato</translation>
    </message>
    <message>
        <location filename="../awards.cpp" line="709"/>
        <source>Not identified</source>
        <translation>Non identificato</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="271"/>
        <location filename="../database.cpp" line="310"/>
        <source>Database Error</source>
        <translation>Errore nel database</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1447"/>
        <source>KLog DB needs to be upgraded.</source>
        <translation>Il DB KLog deve essere aggiornato.</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="2032"/>
        <source>KLog has detected a previous log in the DB. All data will be migrated to a newly created DX type log for you.</source>
        <translation>KLog ha rilevato un precedente log nel DB. Tutti i dati saranno copiati su un nuovolog tipo DX per te.</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="2050"/>
        <source>KLog: Enter Station callsign</source>
        <translation>KLog: Inserisci nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="2051"/>
        <source>Enter the station callsign used in this log</source>
        <translation>Inserisci il nominativo di stazione usato in questo log</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="2052"/>
        <source>Station Callsign</source>
        <translation>Nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="2103"/>
        <source>All the data was migrated correctly. You should now go to Setup-&gt;Preferences-&gt;Logs to check that everything is OK.</source>
        <translation>Tutti i dati sono stati copiati correttamente. Adesso dovresti andare su Configurazione &gt; Preferenze &gt;Logs per controllare che sia tutto OK.</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="3373"/>
        <location filename="../database.cpp" line="3556"/>
        <location filename="../database.cpp" line="6706"/>
        <location filename="../database.cpp" line="6929"/>
        <location filename="../dataproxy_sqlite.cpp" line="3942"/>
        <source>QSO: </source>
        <translation>QSO: </translation>
    </message>
    <message>
        <location filename="../database.cpp" line="3448"/>
        <location filename="../database.cpp" line="3625"/>
        <location filename="../database.cpp" line="3826"/>
        <location filename="../database.cpp" line="4034"/>
        <source>Canceling this update will cause data inconsistencies and possibly data loss. Do you still want to cancel?</source>
        <translation>Annullare questo aggiornamento può causare inconsistenza dei dati caricati e perdite di dati. Ancora vuoi effettuare l&apos;annullamento?</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="3756"/>
        <location filename="../database.cpp" line="3958"/>
        <source>Progress: </source>
        <translation>Progresso: </translation>
    </message>
    <message>
        <location filename="../database.cpp" line="6614"/>
        <source>Updating DXCC award information...</source>
        <translation>Aggiornamento imformazioni award DXCC...</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="6706"/>
        <location filename="../database.cpp" line="6929"/>
        <location filename="../dataproxy_sqlite.cpp" line="3942"/>
        <source>Updating DXCC Award information...</source>
        <translation>Aggiornamento infomrazioni award DXCC...</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="6837"/>
        <source>Updating WAZ award information...</source>
        <translation>Aggiornamento informazioni award WAZ...</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="3352"/>
        <location filename="../database.cpp" line="3373"/>
        <source>Updating mode information...</source>
        <translation>Aggiornamento informazioni modi...</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1448"/>
        <source>Do you want to upgrade it now?</source>
        <translation>Vuoi effettuare l&apos;aggiornamento adesso?</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="1448"/>
        <source>If DB is not upgraded KLog may not work properly.</source>
        <translation>Se il DB non è aggiornato KLog potrebbe non funzionare correttamente.</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="3352"/>
        <location filename="../database.cpp" line="3537"/>
        <location filename="../database.cpp" line="3734"/>
        <location filename="../database.cpp" line="3935"/>
        <location filename="../database.cpp" line="6614"/>
        <location filename="../database.cpp" line="6837"/>
        <location filename="../dataproxy_sqlite.cpp" line="3901"/>
        <source>Abort updating</source>
        <translation>Annulla aggiornamento</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="3537"/>
        <location filename="../database.cpp" line="3556"/>
        <location filename="../database.cpp" line="3756"/>
        <location filename="../database.cpp" line="3958"/>
        <source>Updating bands information...</source>
        <translation>Aggiornamento informazione bande...</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="3732"/>
        <source>Updating bands information in %1 status...</source>
        <translation>Aggiornamento informazione bande %1 stato...</translation>
    </message>
    <message>
        <location filename="../database.cpp" line="3933"/>
        <source>Updating mode information in %1 status...</source>
        <translation>Aggiornamento informazioni modi %1 stato...</translation>
    </message>
    <message>
        <location filename="../main.cpp" line="268"/>
        <source>Install wizard was canceled before completing...</source>
        <translation>Il wizard di installazione è stato annullato prima di aver completato l&apos;operazione...</translation>
    </message>
    <message>
        <location filename="../main.cpp" line="269"/>
        <source>Do you want to remove the KLog dir from your disk?</source>
        <translation>Vuoi rimuovere la cartella KLog dal tuo disco?</translation>
    </message>
    <message>
        <location filename="../main.cpp" line="282"/>
        <source>Your KLog dir has been removed</source>
        <translation>La tua cartella di KLog è stata eliminata</translation>
    </message>
    <message>
        <location filename="../main.cpp" line="288"/>
        <source>I could not remove your KLog dir. You should do it manually if you want it removed from your hard disk.</source>
        <translation>Non sono riuscito ad eliminare la tua cartella KLog. Dovrai eliminarla a mano dal tuo hard disk.</translation>
    </message>
    <message>
        <location filename="../main.cpp" line="295"/>
        <source>Your KLog dir could not be removed. You should do it manually if you want it removed from your hard disk.</source>
        <translation>Non sono riuscito a rimuovere la cartella di KLog. Dovrai eliminarla a mano dal disco.</translation>
    </message>
    <message>
        <location filename="../main.cpp" line="301"/>
        <source>Remember that your KLog dir is on your system...</source>
        <translation>Ricorda che la cartella di KLog è sul tuo sistema...</translation>
    </message>
    <message>
        <location filename="../main.cpp" line="282"/>
        <location filename="../main.cpp" line="288"/>
        <location filename="../main.cpp" line="295"/>
        <location filename="../main.cpp" line="301"/>
        <source>Thank you for running KLog!</source>
        <translation>Grazie per aver usato KLog!</translation>
    </message>
    <message>
        <location filename="../dataproxy_sqlite.cpp" line="3901"/>
        <source>Updating DXCC information...</source>
        <translation>Aggiornamento informazioni DXCC...</translation>
    </message>
</context>
<context>
    <name>SearchWidget</name>
    <message>
        <location filename="../searchwidget.cpp" line="26"/>
        <source>&amp;Clear</source>
        <translation>&amp;Pulisce</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="28"/>
        <location filename="../searchwidget.cpp" line="398"/>
        <location filename="../searchwidget.cpp" line="430"/>
        <source>&amp;Select All</source>
        <translation>&amp;Seleziona Tutto</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="29"/>
        <source>&amp;Search</source>
        <translation>&amp;Cerca</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="30"/>
        <source>All</source>
        <translation>Tutto</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="27"/>
        <source>&amp;Export Highlighted</source>
        <translation>&amp;Esporta elementi evidenziati</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="69"/>
        <source>Clear the searches.</source>
        <translation>Cancella le ricerche.</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="70"/>
        <source>Export the search result to an ADIF file.</source>
        <translation>Esporta i risultati della ricerca su un file ADIF.</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="71"/>
        <source>Select/Unselect all the QSOs shown.</source>
        <translation>Seleziona/deleseziona tutti i QSO mostrati.</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="72"/>
        <source>Search in the log.</source>
        <translation>Cerca nel log.</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="73"/>
        <source>Search in all logs.</source>
        <translation>Cerca in tutti i logs.</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="74"/>
        <source>Enter the QRZ to search for.</source>
        <translation>Inserisci il QRZ da cercare.</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="75"/>
        <source>Search results.</source>
        <translation>Risultati della ricerca.</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="81"/>
        <location filename="../searchwidget.cpp" line="86"/>
        <source>QRZ</source>
        <translation>QRZ</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="81"/>
        <location filename="../searchwidget.cpp" line="86"/>
        <source>Date/Time</source>
        <translation>Data/Ora</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="81"/>
        <location filename="../searchwidget.cpp" line="86"/>
        <source>Band</source>
        <translation>Banda</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="81"/>
        <location filename="../searchwidget.cpp" line="86"/>
        <source>Mode</source>
        <translation>Modo</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="81"/>
        <location filename="../searchwidget.cpp" line="86"/>
        <source>QSL Sent</source>
        <translation>QSL inviata</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="81"/>
        <location filename="../searchwidget.cpp" line="86"/>
        <location filename="../searchwidget.cpp" line="608"/>
        <source>QSL Rcvd</source>
        <translation>QSL ricevuta</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="81"/>
        <source>Station Callsign</source>
        <translation>Nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="81"/>
        <location filename="../searchwidget.cpp" line="86"/>
        <source>ID</source>
        <translation>ID</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="406"/>
        <location filename="../searchwidget.cpp" line="425"/>
        <source>&amp;Clear selection</source>
        <translation>&amp;Pulisce selezione</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="500"/>
        <source>Save File</source>
        <translation>Salva File</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="583"/>
        <source>QSL Send</source>
        <translation>Invia QSL</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="642"/>
        <source>&amp;Delete</source>
        <translation>&amp;Cancella</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="644"/>
        <source>Delete a QSO</source>
        <translation>Cancella un QSO</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="647"/>
        <source>&amp;Edit QSO</source>
        <translation>&amp;Modifica QSO</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="649"/>
        <source>Edit this QSO</source>
        <translation>Modifica questo QSO</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="652"/>
        <source>Via &amp;bureau</source>
        <translation>Via &amp;bureau</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="654"/>
        <source>Send this QSL via bureau</source>
        <translation>Invia questa QSL via bureau</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="657"/>
        <source>D&amp;irect</source>
        <translation>D&amp;iretta</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="659"/>
        <source>Send this QSL via direct</source>
        <translation>Invia questa QSL via diretta</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="662"/>
        <source>&amp;Request my QSL</source>
        <translation>&amp;Richiedi la mia QSL</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="664"/>
        <source>Mark my QSL as requested</source>
        <translation>Segna la mia QSL come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="667"/>
        <source>Via Direct &amp;&amp; mark DX QSL as requested</source>
        <translation>Via Diretta &amp;&amp; segna QSL DX come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="668"/>
        <source>Send this QSL via direct &amp; mark DX QSL as requested</source>
        <translation>Invia questa QSL via diretta &amp; segna QSL DX come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="671"/>
        <source>Via Bureau &amp;&amp; mark DX QSL as requested</source>
        <translation>Via bureau &amp;&amp; segna QSL DX come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="672"/>
        <source>Send this QSL via bureau &amp; mark DX QSL as requested</source>
        <translation>Invia questa QSL via bureau &amp; segna QSL DX come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="676"/>
        <source>&amp;Request the QSL</source>
        <translation>&amp;Richiedi la QSL</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="678"/>
        <source>Mark the QSL as requested</source>
        <translation>Segna la QSL come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="682"/>
        <source>Via bureau &amp;&amp; mark my QSL as requested</source>
        <translation>Via bureau &amp;&amp; segna la mia QSL come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="683"/>
        <source>QSL received via bureau &amp; mark my QSL as requested</source>
        <translation>QSL rcievuta via bureau &amp; segna la mia QSL come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="686"/>
        <source>Via bureau</source>
        <translation>Via bureau</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="687"/>
        <source>QSL received via bureau</source>
        <translation>QSL ricevuta via bureau</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="691"/>
        <source>Direc&amp;t &amp;&amp; mark as my QSL requested</source>
        <translation>Diret&amp;ta &amp;&amp; segna come richiesta la mia QSL</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="692"/>
        <source>QSL received via direct &amp; mark my QSL as requested</source>
        <translation>QSL ricevuta via diretta &amp; segna la mia QSL come richiesta</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="695"/>
        <source>Direc&amp;t</source>
        <translation>Diret&amp;ta</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="696"/>
        <source>QSL received via direct</source>
        <translation>QSL ricevuta via diretta</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="924"/>
        <source>You have requested to delete the QSO with:</source>
        <translation>Hai richiesto di cancellare questo QSO con:</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="929"/>
        <source>Are you sure?</source>
        <translation>Sei sicuro?</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="992"/>
        <source>Needed QSO to send the QSL</source>
        <translation>QSO che hanno bisogno to inviare la QSL</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="1000"/>
        <source>My QSL requested to be sent</source>
        <translation>La mia richiesta di QSL da inviare</translation>
    </message>
    <message>
        <location filename="../searchwidget.cpp" line="1005"/>
        <location filename="../searchwidget.cpp" line="1010"/>
        <source>DX QSL pending to be received</source>
        <translation>QSL DX in attesa di essere ricevuta</translation>
    </message>
</context>
<context>
    <name>SetupDialog</name>
    <message>
        <location filename="../setupdialog.cpp" line="86"/>
        <source>My Data</source>
        <translation>Dati personali</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="87"/>
        <location filename="../setupdialog.cpp" line="159"/>
        <location filename="../setupdialog.cpp" line="313"/>
        <source>Bands/Modes</source>
        <translation>Bande/modi</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="88"/>
        <location filename="../setupdialog.cpp" line="319"/>
        <source>DX-Cluster</source>
        <translation>DX-CLuster</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="89"/>
        <location filename="../setupdialog.cpp" line="161"/>
        <location filename="../setupdialog.cpp" line="325"/>
        <source>Colors</source>
        <translation>Colori</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="90"/>
        <location filename="../setupdialog.cpp" line="162"/>
        <location filename="../setupdialog.cpp" line="331"/>
        <source>Misc</source>
        <translation>Altro</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="91"/>
        <location filename="../setupdialog.cpp" line="163"/>
        <source>World Editor</source>
        <translation>World Editor</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="92"/>
        <location filename="../setupdialog.cpp" line="164"/>
        <location filename="../setupdialog.cpp" line="307"/>
        <source>Logs</source>
        <translation>Logs</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="93"/>
        <location filename="../setupdialog.cpp" line="165"/>
        <source>ClubLog</source>
        <translation>ClubLog</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="95"/>
        <location filename="../setupdialog.cpp" line="169"/>
        <source>Cancel</source>
        <translation>Annulla</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="96"/>
        <location filename="../setupdialog.cpp" line="170"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="119"/>
        <location filename="../setupdialog.cpp" line="190"/>
        <source>Config Dialog</source>
        <translation>Pagina di configurazione</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="158"/>
        <location filename="../setupdialog.cpp" line="301"/>
        <source>User data</source>
        <translation>Dati utente</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="160"/>
        <source>D&amp;X-Cluster</source>
        <translation>D&amp;X-Cluster</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="285"/>
        <source>You need to enter at least one log in the Logs tab.</source>
        <translation>E&apos; necessario caricare almeno un log nella tab configurazione logs.</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="337"/>
        <source>World</source>
        <translation>World</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="367"/>
        <source>Misc tab</source>
        <translation>Tab configurazione altro</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="367"/>
        <source>and click on</source>
        <translation>e cliccare su</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="367"/>
        <source>Move DB</source>
        <translation>Sposta-DB</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="367"/>
        <source>or the DB will not be moved to the new location.</source>
        <translation>oppure il DB non sarà sopostato alla nuova locazione.</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="375"/>
        <source>You need to enter at least a valid QRZ.</source>
        <translation>E&apos; necessario che tu inserisca almeno un corretto QRZ.</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="388"/>
        <source>You will be redirected to the Log tab.
Please add and select the kind of log you want to use.</source>
        <translation>Sarai portato sulla tab di impostazione log.
Per favore aggiungi e scegli il tipo di log che vuoi utilizzare.</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="367"/>
        <location filename="../setupdialog.cpp" line="376"/>
        <source>Go to the</source>
        <translation>Go to the</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="366"/>
        <source>DB has not been moved to new path</source>
        <translation>DB non è stato spostato alla nuova path</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="376"/>
        <source>User tab</source>
        <translation>Tab impostazioni utente</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="376"/>
        <source>and enter valid QRZ.</source>
        <translation>ed inserisci un valido QRZ.</translation>
    </message>
    <message>
        <location filename="../setupdialog.cpp" line="387"/>
        <source>You have not selected the kind of log you want.</source>
        <translation>Non hai scelto il tipo di log che vuoi usare.</translation>
    </message>
</context>
<context>
    <name>SetupEntityDialog</name>
    <message>
        <location filename="../setupentitydialog.cpp" line="69"/>
        <source>Entity</source>
        <translation>Collegamento</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="71"/>
        <source>Name of the Entity</source>
        <translation>Nome del collegamento</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="73"/>
        <source>CQ</source>
        <translation>CQ</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="75"/>
        <source>CQ zone</source>
        <translation>zona CQ</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="77"/>
        <source>ITU</source>
        <translation>ITU</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="79"/>
        <source>ITU zone</source>
        <translation>zona ITU</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="85"/>
        <source>Latitude</source>
        <translation>latitudine</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="87"/>
        <location filename="../setupentitydialog.cpp" line="91"/>
        <source>Longitude of the Entity</source>
        <translation>Longitudine del collegamento</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="89"/>
        <source>Longitude</source>
        <translation>Longitudine</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="93"/>
        <source>UTC</source>
        <translation>UTC</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="95"/>
        <source>Local time difference to UTC</source>
        <translation>Differenza da tempo locale a UTC</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="97"/>
        <source>Main prefix</source>
        <translation>Prefisso principale</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="99"/>
        <source>Main prefix of the entity</source>
        <translation>Prefisso principale del collegamento</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="103"/>
        <location filename="../setupentitydialog.cpp" line="105"/>
        <source>ARRL ID</source>
        <translation>ARRL ID</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="113"/>
        <source>Comma separated possible prefixes, e.g. EA1, EA2, ...</source>
        <translation>Virgole separano possibili prefissi, es. EA1,EA2, ...</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="111"/>
        <source>Prefixes</source>
        <translation>Prefissi</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="116"/>
        <source>Date of the deletion</source>
        <translation>Data di cancellazione</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="118"/>
        <source>Deleted</source>
        <translation>Cancellato</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="120"/>
        <source>Cancel</source>
        <translation>Cancella</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="121"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../setupentitydialog.cpp" line="209"/>
        <source>Entity Dialog</source>
        <translation>Maschera collegamento</translation>
    </message>
</context>
<context>
    <name>SetupPageBandMode</name>
    <message>
        <location filename="../setuppagebandmode.cpp" line="16"/>
        <source>Bands</source>
        <translation>Bande</translation>
    </message>
    <message>
        <location filename="../setuppagebandmode.cpp" line="20"/>
        <source>Modes</source>
        <translation>Modi</translation>
    </message>
</context>
<context>
    <name>SetupPageClubLog</name>
    <message>
        <location filename="../setuppageclublog.cpp" line="45"/>
        <source>&amp;Callsign</source>
        <translation>&amp;Nominativo</translation>
    </message>
    <message>
        <location filename="../setuppageclublog.cpp" line="46"/>
        <source>ClubLog &amp;password</source>
        <translation>ClobLog &amp;password</translation>
    </message>
    <message>
        <location filename="../setuppageclublog.cpp" line="47"/>
        <source>ClubLog &amp;email</source>
        <translation>ClubLog &amp;email</translation>
    </message>
    <message>
        <location filename="../setuppageclublog.cpp" line="53"/>
        <source>Enter the email you used to register in ClubLog.</source>
        <translation>Inserisci l&apos;email che hai usato per registrarti a ClubLog.</translation>
    </message>
    <message>
        <location filename="../setuppageclublog.cpp" line="54"/>
        <source>Enter the callsign you used to register in ClubLog.</source>
        <translation>Inserisci il nominativo che hai usato per registrarti a ClubLog.</translation>
    </message>
    <message>
        <location filename="../setuppageclublog.cpp" line="55"/>
        <source>Enter your password in ClubLog.</source>
        <translation>Inserisci la tua password per ClubLog.</translation>
    </message>
    <message>
        <location filename="../setuppageclublog.cpp" line="60"/>
        <source>&amp;Send QSOs in real time</source>
        <translation>&amp;Invia QSO in tempo reale</translation>
    </message>
    <message>
        <location filename="../setuppageclublog.cpp" line="61"/>
        <source>&amp;Activate ClubLog</source>
        <translation>&amp;Attiva ClubLog</translation>
    </message>
    <message>
        <location filename="../setuppageclublog.cpp" line="62"/>
        <source>Use QSO Station &amp;Callsign</source>
        <translation>Usa stazione QSO &amp;Nominativo</translation>
    </message>
    <message>
        <location filename="../setuppageclublog.cpp" line="63"/>
        <source>Send each QSO to ClubLog in real time, as they are added (or modified) in KLog</source>
        <translation>Invia ogni QSO a ClubLog in tempo reale, appena aggiunti (o modificati) su KLog</translation>
    </message>
    <message>
        <location filename="../setuppageclublog.cpp" line="64"/>
        <source>Starts the ClubLog support in KLog</source>
        <translation>Avvia il servizio ClubLog su KLog</translation>
    </message>
    <message>
        <location filename="../setuppageclublog.cpp" line="65"/>
        <source>Use the Station Callsign defined in each QSO instead of the one defined here</source>
        <translation>Usa il nominativo di stazione definito in ogni QSL invece di quello qui riportato</translation>
    </message>
</context>
<context>
    <name>SetupPageColors</name>
    <message>
        <location filename="../setuppagecolors.cpp" line="42"/>
        <source>New One</source>
        <translation>Nuovo</translation>
    </message>
    <message>
        <location filename="../setuppagecolors.cpp" line="43"/>
        <source>Needed in this band</source>
        <translation>Necessario in questa banda</translation>
    </message>
    <message>
        <location filename="../setuppagecolors.cpp" line="44"/>
        <source>Worked in this band</source>
        <translation>Lavorato in questa banda</translation>
    </message>
    <message>
        <location filename="../setuppagecolors.cpp" line="45"/>
        <source>Confirmed in this band</source>
        <translation>Comfermato in questa banda</translation>
    </message>
    <message>
        <location filename="../setuppagecolors.cpp" line="46"/>
        <source>Default</source>
        <translation>Default</translation>
    </message>
    <message>
        <location filename="../setuppagecolors.cpp" line="131"/>
        <source>Choose a color</source>
        <translation>Scegli un colore</translation>
    </message>
</context>
<context>
    <name>SetupPageDxCluster</name>
    <message>
        <location filename="../setuppagedxcluster.cpp" line="74"/>
        <source>Add</source>
        <translation>Aggiungi</translation>
    </message>
    <message>
        <location filename="../setuppagedxcluster.cpp" line="75"/>
        <source>Delete</source>
        <translation>Cancella</translation>
    </message>
    <message>
        <location filename="../setuppagedxcluster.cpp" line="77"/>
        <source>Show &amp;HF spots</source>
        <translation>Mostra &amp;HF spots</translation>
    </message>
    <message>
        <location filename="../setuppagedxcluster.cpp" line="78"/>
        <source>Show V/&amp;UHF spots</source>
        <translation>Mostra V/&amp;UHF spots</translation>
    </message>
    <message>
        <location filename="../setuppagedxcluster.cpp" line="79"/>
        <source>Show W&amp;ARC spots</source>
        <translation>Mostra W&amp;ARC spots</translation>
    </message>
    <message>
        <location filename="../setuppagedxcluster.cpp" line="80"/>
        <source>Show &amp;worked spots</source>
        <translation>Mostra spots &amp;lavorati</translation>
    </message>
    <message>
        <location filename="../setuppagedxcluster.cpp" line="81"/>
        <source>Show &amp;confirmed spots</source>
        <translation>Mostra spot &amp;confermati</translation>
    </message>
    <message>
        <location filename="../setuppagedxcluster.cpp" line="82"/>
        <source>Show ANN/&amp;FULL messages</source>
        <translation>Mostra ANN/&amp;TUTTI i messaggi</translation>
    </message>
    <message>
        <location filename="../setuppagedxcluster.cpp" line="83"/>
        <source>Show WW&amp;V messages</source>
        <translation>Mostra messaggi WW&amp;V</translation>
    </message>
    <message>
        <location filename="../setuppagedxcluster.cpp" line="84"/>
        <source>Show WC&amp;Y messages</source>
        <translation>Mostra messaggi WC&amp;Y</translation>
    </message>
    <message>
        <location filename="../setuppagedxcluster.cpp" line="86"/>
        <source>DX Spots</source>
        <translation>DX Spots</translation>
    </message>
    <message>
        <location filename="../setuppagedxcluster.cpp" line="98"/>
        <source>Messages</source>
        <translation>Messaggi</translation>
    </message>
    <message>
        <location filename="../setuppagedxcluster.cpp" line="156"/>
        <source>KLog: Add a DXCluster server</source>
        <translation>KLog: Aggiungi un server DXCluster</translation>
    </message>
    <message>
        <location filename="../setuppagedxcluster.cpp" line="157"/>
        <source>Add the address followed by the :port
Example: dxfun.com:8000
If no port is specified, 41112 will be used by default:</source>
        <translation>Aggiungi l&apos;indirizzo seguito da :porta
Esempio: dxfun.com:8000
Se la porta non è specificata, 41112 sarà usato di default:</translation>
    </message>
</context>
<context>
    <name>SetupPageLogs</name>
    <message>
        <location filename="../setuppagelogs.cpp" line="70"/>
        <source>&amp;New</source>
        <translation>&amp;Nuovo</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="71"/>
        <source>&amp;Edit</source>
        <translation>&amp;Modifica</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="72"/>
        <source>&amp;Remove</source>
        <translation>&amp;Elimina</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="75"/>
        <source>Add a new log</source>
        <translation>Aggiunge un nuovo log</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="79"/>
        <source>Edit the selected log</source>
        <translation>Modifica il log selezionato</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="80"/>
        <source>Remove the selected log</source>
        <translation>Elimina il log selezionato</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="82"/>
        <source>Select the log you want to open</source>
        <translation>Scegli il log che desideri aprire</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="219"/>
        <source>KLog</source>
        <translation>KLog</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="253"/>
        <source>Log has not been removed. (#3)</source>
        <translation>Il Log non è stato rimosso. (#3)</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="220"/>
        <source>Do you really want to remove this log?</source>
        <translation>Davvero vuoi eliminare questo log?</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="221"/>
        <source>All the QSOs from this log will be also deleted...</source>
        <translation>Anche tutti i QSO di questo log saranno eliminati...</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="260"/>
        <source>Log has not been removed. (#2)</source>
        <translation>Il Log non è stato rimosso. (#2)</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="267"/>
        <source>Log has not been removed. (#1)</source>
        <translation>Il Log non è stato rimosso. (#1)</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="327"/>
        <source>ID</source>
        <translation>ID</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="330"/>
        <source>Date</source>
        <translation>Data</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="333"/>
        <source>Station Callsign</source>
        <translation>Nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="336"/>
        <source>Operators</source>
        <translation>Operatori</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="339"/>
        <source>Comments</source>
        <translation>Commenti</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="342"/>
        <source>Type</source>
        <translation>Tipo</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="649"/>
        <source>An error has occurred showing the following error code:</source>
        <translation>Si è verificato un errore che riporta il seguente codice di errore:</translation>
    </message>
    <message>
        <location filename="../setuppagelogs.cpp" line="652"/>
        <source>KLog - SetupPageLogs</source>
        <translation>KLog - Pagina setup Logs</translation>
    </message>
</context>
<context>
    <name>SetupPageLogsNew</name>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="92"/>
        <source>&amp;Date</source>
        <translation>&amp;Data</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="93"/>
        <source>&amp;Station Callsign</source>
        <translation>&amp;Nominativo di stazione</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="94"/>
        <source>&amp;Operators</source>
        <translation>&amp;Operatori</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="95"/>
        <source>Comm&amp;ent</source>
        <translation>Comm&amp;enta</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="97"/>
        <source>&amp;Ok</source>
        <translation>&amp;Ok</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="98"/>
        <source>&amp;Cancel</source>
        <translation>&amp;Annulla</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="155"/>
        <source>Select categories</source>
        <translation>Seleziona categoria</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="159"/>
        <source>Callsign used for this log</source>
        <translation>Nominativo usato per questo log</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="160"/>
        <source>Comma separated list of operators: callsign1, callsign2</source>
        <translation>Lista degli operatori separati da virgola: nome1, nome2</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="162"/>
        <source>Start date of this log</source>
        <translation>Data di inizio di questo log</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="163"/>
        <source>Add a comment about this log</source>
        <translation>Aggiunge un commento relativo a questo log</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="165"/>
        <source>&amp;Type of Operation</source>
        <translation>&amp;Tipo di operazione</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="172"/>
        <source>Select the kind of operation for this log</source>
        <translation>Scegli il tipo di operazione di questo log</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="179"/>
        <source>&amp;Mode Category</source>
        <translation>Categoria &amp;Modo</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="181"/>
        <source>Select the mode category</source>
        <translation>Scegli la categoria di modo</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="187"/>
        <source>O&amp;perators Category</source>
        <translation>Categoria o&amp;peratori</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="189"/>
        <source>Select the operators category</source>
        <translation>Scegli la categoria degli operatori</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="194"/>
        <source>&amp;Assisted Category</source>
        <translation>Categoria &amp;Assisted</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="196"/>
        <source>Select the assisted category</source>
        <translation>Scegli la categoria assisted</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="202"/>
        <source>Po&amp;wer Category</source>
        <translation>Categoria Po&amp;tenza</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="204"/>
        <source>Select the power category</source>
        <translation>Scegli la categoria di potenza</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="210"/>
        <source>&amp;Bands Category</source>
        <translation>Categoria &amp;Bande</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="212"/>
        <source>Select the bands category</source>
        <translation>Scegli la categoria delel bande</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="217"/>
        <source>O&amp;verlay</source>
        <translation>O&amp;verlay</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="219"/>
        <source>Select the Overlay category</source>
        <translation>Scegli la categoria overlay</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="380"/>
        <location filename="../setuppagelogsnew.cpp" line="936"/>
        <source>Categories not OK</source>
        <translation>Categorie non OK</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="577"/>
        <source>You need to enter a valid QRZ in the Station Callsign box.
The log will not be opened.</source>
        <translation>E&apos; necessario che tu isnerisca un valido QRZ nella pagina di configurazione del bnominativo di stazione.
Il log non sarà aperto.</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="688"/>
        <source>You selected an invalid combination.
The log will not be opened.</source>
        <translation>Hai scelto una combinazione non valida.
Il log non sarà aperto.</translation>
    </message>
    <message>
        <location filename="../setuppagelogsnew.cpp" line="928"/>
        <source>Categories OK</source>
        <translation>Categorie OK</translation>
    </message>
</context>
<context>
    <name>SetupPageMisc</name>
    <message>
        <location filename="../setuppagemisc.cpp" line="38"/>
        <source>&amp;Imperial system</source>
        <translation>Sistema &amp;Imperiale</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="39"/>
        <source>&amp;Log in real time</source>
        <translation>&amp;Log in tempo reale</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="40"/>
        <source>&amp;Time in UTC</source>
        <translation>&amp;Ora in UTC</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="41"/>
        <source>&amp;Save ADIF on exit</source>
        <translation>&amp;Salva ADIF all&apos;uscita</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="42"/>
        <source>Use this &amp;default filename</source>
        <translation>Usa questo nome di file per &amp;default</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="43"/>
        <source>Mark &amp;QSO to send QSL when QSL is received</source>
        <translation>Segna il &amp;QSO per inviare QSL quando una QSL è ricevuta</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="44"/>
        <source>Complete QSO with previous data</source>
        <translation>Completa i dati del QSO con dati precedenti</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="45"/>
        <source>Show the Station &amp;Callsign used in the search box</source>
        <translation>Mostra il &amp;nominativo di stazione caricato nella pagina di ricerca</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="111"/>
        <source>The search box will show also the callsign on the air to do the QSO.</source>
        <translation>La pagina di ricerca mostra anche il nominativo usato durante il QSO.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="112"/>
        <source>All the data from the My Data tab will be used or data from the previous QSO will be maintained.</source>
        <translation>Tutti i dati nella pagina configurazione personale saranno usato oppure saranno mantenuti i dati del precedente QSO.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="47"/>
        <source>&amp;Check for new versions automatically</source>
        <translation>&amp;Controlla automaticamente nuove versioni</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="113"/>
        <source>Check if there is a new release of KLog available every time you start KLog.</source>
        <translation>Controlla se è diosponibile una nuova versione di KLog ogni volta che tu avvii KLog.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="48"/>
        <source>&amp;Provide Info for statistics</source>
        <translation>&amp;Fornisci informazioni per statistiche</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="55"/>
        <source>Move DB</source>
        <translation>Sposta DB</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="115"/>
        <source>Check it for Imperial system (Miles instead of Kilometres).</source>
        <translation>Controlla esso per il sistema Imperiale (Miglia invece di Kilometri).</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="116"/>
        <source>Select to use real time.</source>
        <translation>Scegli di usare ora reale.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="117"/>
        <source>Select to use UTC time.</source>
        <translation>Scegli di usare ora UTC.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="118"/>
        <source>Select if you want to save to ADIF on exit.</source>
        <translation>Scegli se vuoi salvare su formato ADIF all&apos;uscita.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="120"/>
        <source>Complete the current QSO with previous QSO data.</source>
        <translation>Completa il QSO corrente con i dati del precedente QSO.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="594"/>
        <source>This is the directory where DB (logbook.dat) will be saved.</source>
        <translation>Questa è la cartella dove DB (logbook.dat) sarà salvato.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="123"/>
        <source>Click to change the default ADIF file.</source>
        <translation>Clicca per cambiare il file ADIF di default.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="125"/>
        <source>Click to move the DB to the new directory.</source>
        <translation>Clicca per spostare il DB su una nuova cartella.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="563"/>
        <source>Select Directory</source>
        <translation>Scegli la cartella</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="635"/>
        <source>File moved</source>
        <translation>File spostato</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="645"/>
        <source>File copied</source>
        <translation>File copiato</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="655"/>
        <source>File NOT copied</source>
        <translation>File NON copiato</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="668"/>
        <source>The target directory does not exist. Please select an existing directory.</source>
        <translation>La cartella di destinazione non esiste. Per favore scegli una cartella valida.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="53"/>
        <location filename="../setuppagemisc.cpp" line="54"/>
        <source>Browse</source>
        <translation>Browse</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="46"/>
        <source>&amp;Reset to My Data for all QSOs</source>
        <translation>&amp;Reimposta ai miei dati su tutti i QSO</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="110"/>
        <source>QSOs will be marked as pending to send a QSL if you receive the DX QSL and have not sent yours.</source>
        <translation>Il QSO sarà marcato come in attesadi inviare una QSL se ricevi la QSL DX senza aver inviato la tua.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="114"/>
        <source>If new version checking is selected, KLog will send the developer your callsign, KLog version &amp; Operating system to help in improving KLog.</source>
        <translation>Se il controllo di nuova versione è attivato, KLog trasmetterà allo sviluppatore il tuo nominativo, la versione di KLog &amp; il sistema operativo coem strumento per aiutare a migliorare KLog.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="119"/>
        <source>Select to use the following name for the logfile without being asked for it again.</source>
        <translation>Scegli il seguente nome per il file di log senza che ti venga chiesto di nuovo.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="121"/>
        <source>This is the default file where ADIF data will be saved.</source>
        <translation>Questo è il file di default dove i dati ADIF saranno salvati.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="122"/>
        <source>This is the directory where the database (logbook.dat) will be saved.</source>
        <translation>Questa è la cartella dove il database (logbook.dat) sarà salvato.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="124"/>
        <source>Click to change the path of the database.</source>
        <translation>Clicca per cambiare la path del database.</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="264"/>
        <source>Open File</source>
        <translation>Apre File</translation>
    </message>
    <message>
        <location filename="../setuppagemisc.cpp" line="600"/>
        <source>Please specify an existing directory where the database (logbook.dat) will be saved.</source>
        <translation>Per favore indica una cartella valida dove il database (logbook.dat) sarà salvato.</translation>
    </message>
</context>
<context>
    <name>SetupPageUserDataPage</name>
    <message>
        <location filename="../setuppageuserdata.cpp" line="40"/>
        <source>&amp;Personal data</source>
        <translation>Dati &amp;Personali</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="41"/>
        <source>Station &amp;data</source>
        <translation>&amp;Data Stazione</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="70"/>
        <source>Enter your name</source>
        <translation>Inserisci il tuo nome</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="71"/>
        <source>Enter your address - 1st line</source>
        <translation>Inserisci il tuo indirizzo -1a linea</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="72"/>
        <source>Enter your address - 2nd line</source>
        <translation>Inserisci il tuo indirizzo -2a linea</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="73"/>
        <source>Enter your address - 3rd line</source>
        <translation>Inserisci il tuo indirizzo -3a linea</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="74"/>
        <source>Enter your address - 4th line</source>
        <translation>Inserisci il tuo indirizzo -4a linea</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="75"/>
        <source>Enter your city</source>
        <translation>Inserisci la tua città</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="76"/>
        <source>Enter your zip code</source>
        <translation>Inserisci il tuo CAP</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="77"/>
        <source>Enter your province or state</source>
        <translation>Inserisci la pronvincia o lo stato</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="78"/>
        <source>Enter your country</source>
        <translation>Inserisci il tuo country</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="80"/>
        <source>&amp;Name</source>
        <translation>&amp;Nome</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="81"/>
        <source>&amp;Address</source>
        <translation>&amp;Indirizzo</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="82"/>
        <source>Cit&amp;y</source>
        <translation>Cit&amp;tà</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="83"/>
        <source>&amp;Zip Code</source>
        <translation>&amp;Cap</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="84"/>
        <source>Pro&amp;v/State</source>
        <translation>Pro&amp;v/Stato</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="85"/>
        <source>Countr&amp;y</source>
        <translation>Countr&amp;y</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="139"/>
        <location filename="../setuppageuserdata.cpp" line="140"/>
        <location filename="../setuppageuserdata.cpp" line="141"/>
        <source>Enter your information for rig</source>
        <translation>Inserisci informazioni per rig</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="142"/>
        <location filename="../setuppageuserdata.cpp" line="143"/>
        <location filename="../setuppageuserdata.cpp" line="144"/>
        <source>Enter your information for antenna</source>
        <translation>Inserisci informazioni sulla tua antenna</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="188"/>
        <source>Enter the locator of your station. Alternatively, KLog can use an approximate locator based on your callsign.</source>
        <translation>Inserisci il locator della tua stazione. In alternativa, KLog è in grado di usare un locator approssimativo ricavato dal tuo nominativo.</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="145"/>
        <source>Enter your power information</source>
        <translation>Inserisci informazioni sulla potenza usata</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="147"/>
        <source>&amp;Rig 1</source>
        <translation>&amp;Impianto 1</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="148"/>
        <source>R&amp;ig 2</source>
        <translation>&amp;Impianto 1</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="149"/>
        <source>Ri&amp;g 3</source>
        <translation>&amp;Impianto 1</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="150"/>
        <source>Antenna &amp;1</source>
        <translation>Antenna &amp;1</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="151"/>
        <source>Antenna &amp;2</source>
        <translation>Antenna &amp;2</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="152"/>
        <source>Antenna &amp;3</source>
        <translation>Antenna &amp;3</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="153"/>
        <source>Po&amp;wer</source>
        <translation>Po&amp;tenza</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="186"/>
        <source>Enter the station callsign that will be used for logging</source>
        <translation>Inserisci il nominativo di chiamata da usare per il log</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="187"/>
        <source>Enter the operators (comma separated if more than one).</source>
        <translation>Inserisci gli operatori (separati da virgola se più di uno).</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="191"/>
        <source>&amp;QRZ</source>
        <translation>&amp;QRZ</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="192"/>
        <source>&amp;Operators</source>
        <translation>&amp;Operatori</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="193"/>
        <source>&amp;CQ Zone</source>
        <translation>&amp;CQ zona</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="194"/>
        <source>&amp;ITU Zone</source>
        <translation>&amp;ITU zona</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="195"/>
        <location filename="../setuppageuserdata.cpp" line="373"/>
        <source>&amp;Locator</source>
        <translation>&amp;Locator</translation>
    </message>
    <message>
        <location filename="../setuppageuserdata.cpp" line="369"/>
        <source>&amp;Locator (not valid)</source>
        <translation>&amp;Locator (non valido)</translation>
    </message>
</context>
<context>
    <name>SetupPageWorldEditor</name>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="88"/>
        <source>An entities information file (cty.csv) has been detected in your KLog folder and will be loaded.</source>
        <translation>Un file di informazioni collegamenti (cty.csv) è stato trovato nella cartella di KLog e sarà caricato.</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="97"/>
        <source>No entities information file (cty.csv) has been detected in your KLog folder.</source>
        <translation>Nessun file di informazioni di collegamenti (cty.cvs) è stato trovato nella cartalla di KLog.</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="98"/>
        <source>KLog will not be able to show entities information.</source>
        <translation>KLog non sarà in grado di mostrare le informazioni di collegamento.</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="184"/>
        <source>Prefix</source>
        <translation>Prefisso</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="186"/>
        <source>Entity</source>
        <translation>Collegamento</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="188"/>
        <source>ARRL ID</source>
        <translation>ARRL ID</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="190"/>
        <source>Continent</source>
        <translation>Continente</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="192"/>
        <source>CQ Zone</source>
        <translation>CQ zona</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="194"/>
        <source>ITU Zone</source>
        <translation>ITU zona</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="196"/>
        <source>UTC</source>
        <translation>UTC</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="198"/>
        <source>Latitude</source>
        <translation>Latidudine</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="200"/>
        <source>Longitude</source>
        <translation>Longitudine</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="203"/>
        <source>Deleted</source>
        <translation>Eliminato</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="206"/>
        <source>Since Date</source>
        <translation>Dalla data</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="208"/>
        <source>To Date</source>
        <translation>Alla data</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="305"/>
        <source>Open File</source>
        <translation>Apre File</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="305"/>
        <source>BigCTY (*.csv)</source>
        <translation>BigCTY (*.csv)</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="314"/>
        <source>Entities information has been updated.</source>
        <translation>Informazioni collegamento aggiornate.</translation>
    </message>
    <message>
        <location filename="../setuppageworldeditor.cpp" line="320"/>
        <source>Entities information has not been updated.</source>
        <translation>Informazioni collegamento non aggiornate.</translation>
    </message>
</context>
<context>
    <name>ShowErrorDialog</name>
    <message>
        <location filename="../showerrordialog.cpp" line="9"/>
        <source>KLog Message</source>
        <translation>Messaggio KLog</translation>
    </message>
</context>
<context>
    <name>SoftwareUpdateDialog</name>
    <message>
        <location filename="../softwareupdatedialog.cpp" line="17"/>
        <source>Ok</source>
        <translation>Ok</translation>
    </message>
    <message>
        <location filename="../softwareupdatedialog.cpp" line="35"/>
        <source>KLog update</source>
        <translation>Aggiornamento KLog</translation>
    </message>
    <message>
        <location filename="../softwareupdatedialog.cpp" line="53"/>
        <source>Congratulations!</source>
        <translation>congratulazioni!</translation>
    </message>
    <message>
        <location filename="../softwareupdatedialog.cpp" line="53"/>
        <source>Your KLog has been updated.</source>
        <translation>KLog è stato aggiornato.</translation>
    </message>
    <message>
        <location filename="../softwareupdatedialog.cpp" line="53"/>
        <source>You already have the latest version.</source>
        <translation>Stai già usando la versione più recente.</translation>
    </message>
</context>
<context>
    <name>StartWizard</name>
    <message>
        <location filename="../startwizard.cpp" line="42"/>
        <source>KLog - The free hamradio logging program</source>
        <translation>KLog.- Un software libero di annotazione dei collegamento</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="68"/>
        <source>Quit Setup</source>
        <translation>Esce dalla configurazione</translation>
    </message>
    <message>
        <location filename="../startwizard.cpp" line="68"/>
        <source>Setup is not complete yet. Are you sure you want to quit setup?</source>
        <translation>Configurazione non ancora completa. Sei sicuro di voler uscire dalla configurazione?</translation>
    </message>
</context>
<context>
    <name>World</name>
    <message>
        <location filename="../world.cpp" line="171"/>
        <source>Entity</source>
        <translation>Collegamento</translation>
    </message>
    <message>
        <location filename="../world.cpp" line="172"/>
        <source>Continent</source>
        <translation>continente</translation>
    </message>
    <message>
        <location filename="../world.cpp" line="1205"/>
        <source>Abort reading</source>
        <translation>Annulla lettura</translation>
    </message>
    <message>
        <location filename="../world.cpp" line="1205"/>
        <source>Reading cty.csv...</source>
        <translation>Lettura cty.cvs...</translation>
    </message>
</context>
<context>
    <name>eLogClubLog</name>
    <message>
        <location filename="../elogclublog.cpp" line="58"/>
        <location filename="../elogclublog.cpp" line="118"/>
        <source>Host not found!</source>
        <translation>Host non trovato!</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="64"/>
        <location filename="../elogclublog.cpp" line="123"/>
        <source>Timeout error!</source>
        <translation>Errore di Timeout!</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="70"/>
        <source>It seems to be a PASSWORD ERROR; check your password.</source>
        <translation>Si è verificato un ERRORE DI PASSWORD; controlla la tua password.</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="72"/>
        <source>KLog - ClubLog</source>
        <translation>KLog - ClubLog</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="84"/>
        <location filename="../elogclublog.cpp" line="128"/>
        <source>Undefined error...</source>
        <translation>Errore indefinito...</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="391"/>
        <source>Callsign missing</source>
        <translation>Nominativo di chiamata assente</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="395"/>
        <source>Invalid callsign</source>
        <translation>Nominativo di stazione non valido</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="399"/>
        <source>Skipping SWL callsign</source>
        <translation>Salto nominativo SWL</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="403"/>
        <source>Callsign is your own call</source>
        <translation>Callsign is you own call</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="407"/>
        <source>Invalid callsign with no DXCC mapping</source>
        <translation>Nominativo di stazione non valido con nessuna localizzazione DXCC</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="411"/>
        <source>Updated QSO</source>
        <translation>Trasferito QSO</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="415"/>
        <source>Invalid ADIF record</source>
        <translation>Record ADIF non valido</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="419"/>
        <source>Missing ADIF record</source>
        <translation>Record ADIF mancante</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="423"/>
        <source>Test mode - parameters ok, no action taken</source>
        <translation>Modalità test parametri ok, nessuna azione intrapresa</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="73"/>
        <source>It seems that your ClubLog password is not correct.</source>
        <translation>Sembra la tua password ClubLog non sia corretta.</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="74"/>
        <source>Please check your password in the setup. ClubLog uploads will be disabled.</source>
        <translation>Per favore controlla la tua password nella configurazione. Il caricamento su ClubLog non sarà attivo.</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="427"/>
        <source>Excessive API Usage</source>
        <translation>Eccessivo uso delle API</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="431"/>
        <source>Internal Error</source>
        <translation>Errore Interno</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="435"/>
        <source>Rejected</source>
        <translation>Rifiutato</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="439"/>
        <source>QSO Duplicate</source>
        <translation>QSO Duplicato</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="443"/>
        <source>QSO Modified</source>
        <translation>QSO Modificato</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="447"/>
        <source>Missing Login</source>
        <translation>Login mancante</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="451"/>
        <source>QSO OK</source>
        <translation>QSO OK</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="455"/>
        <location filename="../elogclublog.cpp" line="479"/>
        <source>Upload denied</source>
        <translation>Trasferimento rifiutato</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="459"/>
        <source>No callsign selected</source>
        <translation>Nessun nominativo selezionato</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="463"/>
        <source>No match found</source>
        <translation>Nessuna corrispondenza trovata</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="467"/>
        <source>Dropped QSO</source>
        <translation>QSO interrotto</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="471"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="475"/>
        <source>Login rejected</source>
        <translation>Login rifiutato</translation>
    </message>
    <message>
        <location filename="../elogclublog.cpp" line="483"/>
        <source>Rejected: Callsign is your own call</source>
        <translation>Rifiutato: Nominativo is your own call</translation>
    </message>
</context>
</TS>
