hledger-web(1)

NAME

hledger-web - web interface for the hledger accounting tool

SYNOPSIS

hledger-web [OPTIONS]
hledger web -- [OPTIONS]

DESCRIPTION

hledger is a cross-platform program for tracking money, time, or any other commodity, using double-entry accounting and a simple, editable file format. hledger is inspired by and largely compatible with ledger(1).

hledger-web is hledger's web interface. It starts a simple web application for browsing and adding transactions, and optionally opens it in a web browser window if possible. It provides a more user-friendly UI than the hledger CLI or hledger-ui interface, showing more at once (accounts, the current account register, balance charts) and allowing history-aware data entry, interactive searching, and bookmarking.

hledger-web also lets you share a ledger with multiple users, or even the public web. There is no access control, so if you need that you should put it behind a suitable web proxy. As a small protection against data loss when running an unprotected instance, it writes a numbered backup of the main journal file (only ?) on every edit.

Like hledger, it reads data from one or more files in hledger journal, timeclock, timedot, or CSV format specified with -f, or $LEDGER_FILE, or $HOME/.hledger.journal (on windows, perhaps C:/Users/USER/.hledger.journal). For more about this see hledger(1), hledger_journal(5) etc.

OPTIONS

Command-line options and arguments may be used to set an initial filter on the data. These filter options are not shown in the web UI, but it will be applied in addition to any search query entered there.

Note: if invoking hledger-web as a hledger subcommand, write -- before options, as shown in the synopsis above.

--serve
    serve and log requests, don't browse or auto-exit

--host=IPADDR
    listen on this IP address (default: 127.0.0.1)

--port=PORT
    listen on this TCP port (default: 5000)

--base-url=URL
    set the base url (default: http://IPADDR:PORT). You would change this when sharing over the network, or integrating within a larger website.

--file-url=URL
    set the static files url (default: BASEURL/static). hledger-web normally serves static files itself, but if you wanted to serve them from another server for efficiency, you would set the url with this.

--capabilities=CAP[,CAP..]
    enable the view, add, and/or manage capabilities (default: view,add)

--capabilities-header=HTTPHEADER
    read capabilities to enable from a HTTP header, like X-Sandstorm-Permissions (default: disabled)

hledger input options:

-f FILE --file=FILE
    use a different input file. For stdin, use - (default: $LEDGER_FILE or $HOME/.hledger.journal)

--rules-file=RULESFILE
    Conversion rules file to use when reading CSV (default: FILE.rules)

--separator=CHAR
    Field separator to expect when reading CSV (default: ',')

--alias=OLD=NEW
    rename accounts named OLD to NEW

--anon
    anonymize accounts and payees

--pivot FIELDNAME
    use some other field or tag for the account name

-I --ignore-assertions
    ignore any failing balance assertions

hledger reporting options:

-b --begin=DATE
    include postings/txns on or after this date

-e --end=DATE
    include postings/txns before this date

-D --daily
    multiperiod/multicolumn report by day

-W --weekly
    multiperiod/multicolumn report by week

-M --monthly
    multiperiod/multicolumn report by month

-Q --quarterly
    multiperiod/multicolumn report by quarter

-Y --yearly
    multiperiod/multicolumn report by year

-p --period=PERIODEXP
    set start date, end date, and/or reporting interval all at once using period expressions syntax (overrides the flags above)

--date2
    match the secondary date instead (see command help for other effects)

-U --unmarked
    include only unmarked postings/txns (can combine with -P or -C)

-P --pending
    include only pending postings/txns

-C --cleared
    include only cleared postings/txns

-R --real
    include only non-virtual postings

-NUM --depth=NUM
    hide/aggregate accounts or postings more than NUM levels deep

-E --empty
    show items with zero amount, normally hidden (and vice-versa in hledger-ui/hledger-web)

-B --cost
    convert amounts to their cost at transaction time (using the transaction price, if any)

-V --value
    convert amounts to their market value on the report end date (using the most recent applicable market price, if any)

--auto
    apply automated posting rules to modify transactions.

--forecast
    apply periodic transaction rules to generate future transactions, to 6 months from now or report end date.

When a reporting option appears more than once in the command line, the last one takes precedence.

Some reporting options can also be written as query arguments.

hledger help options:

-h --help
    show general usage (or after COMMAND, command usage)

--version
    show version

--debug[=N]
    show debug output (levels 1-9, default: 1)

A @FILE argument will be expanded to the contents of FILE, which should contain one command line option/argument per line. (To prevent this, insert a -- argument before.)

By default, hledger-web starts the web app in "transient mode" and also opens it in your default web browser if possible. In this mode the web app will keep running for as long as you have it open in a browser window, and will exit after two minutes of inactivity (no requests and no browser windows viewing it). With --serve, it just runs the web app without exiting, and logs requests to the console.

By default the server listens on IP address 127.0.0.1, accessible only to local requests. You can use --host to change this, eg --host 0.0.0.0 to listen on all configured addresses.

Similarly, use --port to set a TCP port other than 5000, eg if you are running multiple hledger-web instances.

You can use --base-url to change the protocol, hostname, port and path that appear in hyperlinks, useful eg for integrating hledger-web within a larger website. The default is http://HOST:PORT/ using the server's configured host address and TCP port (or http://HOST if PORT is 80).

With --file-url you can set a different base url for static files, eg for better caching or cookie-less serving on high performance websites.

PERMISSIONS

By default, hledger-web allows anyone who can reach it to view the journal and to add new transactions, but not to change existing data.

You can restrict who can reach it by

•   setting the IP address it listens on (see --host above). By default it listens on 127.0.0.1, accessible to all users on the local machine.

•   putting it behind an authenticating proxy, using eg apache or nginx

•   custom firewall rules

You can restrict what the users who reach it can do, by

•   using the --capabilities=CAP[,CAP..] flag when you start it, enabling one or more of the following capabilities. The default value is view,add:

    •   view - allows viewing the journal file and all included files

    •   add - allows adding new transactions to the main journal file

    •   manage - allows editing, uploading or downloading the main or included files

•   using the --capabilities-header=HTTPHEADER flag to specify a HTTP header from which it will read capabilities to enable. hledger-web on Sandstorm uses the X-Sandstorm-Permissions header to integrate with Sandstorm's permissions. This is disabled by default.

EDITING, UPLOADING, DOWNLOADING

If you enable the manage capability mentioned above, you'll see a new "spanner" button to the right of the search form. Clicking this will let you edit, upload, or download the journal file or any files it includes.

Note, unlike any other hledger command, in this mode you (or any visitor) can alter or wipe the data files.

Normally whenever a file is changed in this way, hledger-web saves a numbered backup (assuming file permissions allow it, the disk is not full, etc.) hledger-web is not aware of version control systems, currently; if you use one, you'll have to arrange to commit the changes yourself (eg with a cron job or a file watcher like entr).

Changes which would leave the journal file(s) unparseable or non-valid (eg with failing balance assertions) are prevented. (Probably. This needs re-testing.)

RELOADING

hledger-web detects changes made to the files by other means (eg if you edit it directly, outside of hledger-web), and it will show the new data when you reload the page or navigate to a new page. If a change makes a file unparseable, hledger-web will display an error message until the file has been fixed.

JSON API

In addition to the web UI, hledger-web provides some JSON API routes. These are similar to the API provided by the hledger-api tool, but it may be convenient to have them in hledger-web also.

    /accountnames
    /transactions
    /prices
    /commodities
    /accounts
    /accounttransactions/#AccountName

ENVIRONMENT

LEDGER_FILE The journal file path when not specified with -f. Default: ~/.hledger.journal (on windows, perhaps C:/Users/USER/.hledger.journal).

FILES

Reads data from one or more files in hledger journal, timeclock, timedot, or CSV format specified with -f, or $LEDGER_FILE, or $HOME/.hledger.journal (on windows, perhaps C:/Users/USER/.hledger.journal).

BUGS

The need to precede options with -- when invoked from hledger is awkward.

-f- doesn't work (hledger-web can't read from stdin).

Query arguments and some hledger options are ignored.

Does not work in text-mode browsers.

Does not work well on small screens.

REPORTING BUGS
Report bugs at http://bugs.hledger.org (or on the #hledger IRC channel or hledger mail list)

AUTHORS
Simon Michael <simon@joyful.com> and contributors

COPYRIGHT
Copyright (C) 2007-2016 Simon Michael.
Released under GNU GPL v3 or later.

SEE ALSO
hledger(1), hledger-ui(1), hledger-web(1), hledger-api(1), hledger_csv(5), hledger_journal(5), hledger_timeclock(5), hledger_timedot(5), ledger(1) http://hledger.org