gnudatalanguage (0.9.4-1ubuntu2) trusty; urgency=medium

  * Update plplot12-driver-xwin recommendation.

 -- Matthias Klose <doko@ubuntu.com>  Thu, 06 Mar 2014 14:19:00 +0100

gnudatalanguage (0.9.4-1ubuntu1) trusty; urgency=medium

  * Fix build failure with plplot-5.10.

 -- Matthias Klose <doko@ubuntu.com>  Thu, 27 Feb 2014 15:56:45 +0100

gnudatalanguage (0.9.4-1build1) trusty; urgency=low

  * No-change rebuild for new grib-api.

 -- Logan Rosen <logan@ubuntu.com>  Sat, 07 Dec 2013 17:38:08 -0500

gnudatalanguage (0.9.4-1) unstable; urgency=low

  * New upstream release
    + Refresh patches

 -- Axel Beckert <abe@debian.org>  Sun, 29 Sep 2013 16:19:44 +0200

gnudatalanguage (0.9.3-2) unstable; urgency=low

  * Upload to unstable.
  * Revamp debian/rules
    - Allow parallel builds
    - Use debian/manpages instead of dh_installman parameter
    - Switch to dh7 style debian/rules file
  * Bump debhelper compatibility to 9
    - Update versioned debhelper build-dependency
  * Bump Standards-Version to 3.9.4 (no changes)
  * Apply wrap-and-sort

 -- Axel Beckert <abe@debian.org>  Wed, 15 May 2013 02:23:58 +0200

gnudatalanguage (0.9.3-1) experimental; urgency=low

  * New upstream release (Closes: #696835)
    - Drop patch fix-muldefs, applied upstream
    - Refresh patch build-with-debian-antlr-instead-embedded-one
    - Drop patch remove-plot3d-nr-cpp-660260, no more needed
    - Drop patch disable-plstrl-and-plP_mmpcx. no more needed
    - Drop patch manpage-fixes, applied upstream
    - Drop lintian override for configure-generated-file-in-source
    - debian/rules: Remove no more needed clean excludes
  * Enable upstream's experimental testsuite, but ignore the result for
    now.
  * Use dh_auto_{configure,build,install}
  * clean target: Remove Makefile if it was generated by CMake

 -- Axel Beckert <abe@debian.org>  Fri, 04 Jan 2013 22:35:21 +0100

gnudatalanguage (0.9.2-4) unstable; urgency=low

  * Update architecture list for grib-api build-dependency. Use a positive
    list, so we use the same list as grib-api itself and rather miss new
    architectures than become unbuildable on new architectures.

 -- Axel Beckert <abe@debian.org>  Sat, 30 Jun 2012 12:35:34 +0200

gnudatalanguage (0.9.2-3) unstable; urgency=low

  * Import patch from upstream to remove plot3d_nr.cpp. Fixes FTBFS when
    building against newer plplot packages. (Closes: #660260, #669123,
    #669497) Thanks Sylwester Arabas!
  * Create patch to disable the WIDTH keyword and charheight based
    positional fine-tuning in the XYOUTS procedure as advised by
    upstream. (FTBFS otherwise, too)
  * Enable hardening build flags
    + Add build dependency on dpkg-dev (>= 1.16.1~)
  * Just use dh_autoreconf*, not both, dh_autoreconf* and
    dh_autotools-dev_*config as advised by dh_autoreconf docs.
  * Use dh_auto_clean instead of $(MAKE) distclean
  * Do not only remove embedded antlr copy before building, but also
    restore it again in the clean target.
  * Ignore any changes to Makefile.in files in the diff.
  * Don't require a present configure for config.status target. Fixes
    building twice in a row.
  * Update Recommends: plplot9-driver-xwin → plplot11-driver-xwin
  * Let dh_clean remove stamp files
  * Bump Standards-Version to 3.9.3 (no changes)
  * Remove Juan A. Añel from Uploaders (no activity since 2007)
  * Exchange Maintainer and Uploader.
  * Add lintian override for "configure-generated-file-in-source
    config.log" as it's removed in the clean target.
  * Add Vcs-* headers
  * Add patch to fix several man-page issues found by lintian.

 -- Axel Beckert <abe@debian.org>  Fri, 29 Jun 2012 17:52:27 +0200

gnudatalanguage (0.9.2-2) unstable; urgency=low

  * Changed the "libhdf5-serial-dev" build-dependency to "libhdf5-dev |
    libhdf5-serial-dev" for the HDF5 1.8.6 to 1.8.8 transition. (See
    http://bugs.debian.org/631019)
  * Changed priority from optional to extra to match override.
  * Fixed the following lintian warnings:
    - debian-rules-missing-recommended-target
    - copyright-refers-to-symlink-license

 -- Axel Beckert <abe@debian.org>  Wed, 18 Jan 2012 20:12:20 +0100

gnudatalanguage (0.9.2-1) unstable; urgency=low

  * New upstream release (Closes: #648476)
    - Fixes FTBFS. (Closes: #647802) Thanks to Daniel T Chen for
      investigation!
    - Add B-D on pslib-dev and add --with-pslib to configure call.
    - No more remove /usr/lib/libantlr.a from the package, it's no more
      built anymore.
    - Refresh patch fix-muldefs
    - Refresh patch build-with-debian-antlr-instead-embedded-one; remove
      parts applied upstream.
  * Install upstream man page, drop outdated debian/gdl.1. Thanks
    Sylwester Arabas! (Closes: #630481)
  * Use dh_autotools-dev_*config instead of manually copying
    config.{sub,guess}
  * Use dh_autoreconf instead of patching configure et al manually.
    - No more patch configure script, just configure.in in remaining
      patches.
  * Bump Standards-Version to 3.9.2 (no changes necessary)

 -- Axel Beckert <abe@debian.org>  Tue, 15 Nov 2011 23:18:56 +0100

gnudatalanguage (0.9.1-1) unstable; urgency=low

  * New upstream release
    - debian/control, debian/rules: Transition from Python Numarray to Numpy
    - debian/patches/autoreconf-result: Refreshed by running autoreconf again
    - debian/patches/fix-muldefs: Refreshed
  * debian/patches/fix-muldefs: Added patch description 
  * debian/control, debian/rules: Do not build with grip support on the
    sparc, mips, hppa and hurd-i386 architectures. This should prevent
    uninstallable build dependencies on these architectures.

 -- Axel Beckert <abe@debian.org>  Thu, 31 Mar 2011 23:04:38 +0200

gnudatalanguage (0.9-2) unstable; urgency=low

  [ Axel Beckert ]
  * debian/patches/fix-muldefs: Patch configure.in to pass linker flags
    properly to compiler to fix FTBFS on some architectures. (Hopefully
    finally closes: #545849)

  [ Gürkan Sengün ]
  * Remove alternative dependency on libhdf4-dev and use libhdf4-alt-dev
    exclusively. Upstream now needs different configure options depending
    on the hd4 version used. (Actually already happened in the last upload.)

 -- Axel Beckert <abe@debian.org>  Wed, 09 Mar 2011 13:58:52 +0100

gnudatalanguage (0.9-1) unstable; urgency=low

  [ Gürkan Sengün ]
  * New upstream version. (Closes: #570204)
    - Fixes bug that routines in src/pro/ are not included by default.
      (LP: 288974)
    - Fixes FTBFS with gcc-4.5. (Closes: #564994)
  * Update b-d libreadline5-dev to libreadline-dev. (Closes: #553772)
  * Bump standards version to 3.9.1.
  * Switch to source format 3.0.
  * Add support for udunits, grib, wxwidgets.
  * Fix lintian warning about debhelper-but-no-misc-depends.
  * Updated long description.

  [ Axel Beckert ]
  * Add myself as uploader.
  * Acknowledge and merge NMU by Julien Cristau.
  * Reran autoreconf again, merged back the changes, upstream made to
    generated INSTALL file.
  * debian/rules: Also remove config.log in clean target
  * No more use the embedded copy of antlr but b-d on Debian's
    libantlr-dev. (Closes: #504857)

 -- Gürkan Sengün <gurkan@phys.ethz.ch>  Tue, 15 Feb 2011 23:04:13 +0100

gnudatalanguage (0.9~rc3-1.1) unstable; urgency=high

  * Non-maintainer upload.
  * Run autoconf so the patch from bug#495470 is not just applied to
    configure.in, but also configure (closes: #545849).

 -- Julien Cristau <jcristau@debian.org>  Wed, 19 May 2010 23:35:41 +0200

gnudatalanguage (0.9~rc3-1) unstable; urgency=low

  * New upstream version. (Closes: #531719)
  * Disable the python modules since upstream doesn't support
    python-numpy yet. (Closes: #478446, #549811)

 -- Gürkan Sengün <gurkan@phys.ethz.ch>  Mon, 28 Sep 2009 09:38:53 +0200

gnudatalanguage (0.9~rc2+20090903-1) unstable; urgency=low

  * New upstream version. (Closes: #500136)
  * Update build-depends. (Closes: #540401)
  * Bump debhelper version.
  * Bump standards version.

 -- Gürkan Sengün <gurkan@phys.ethz.ch>  Thu, 03 Sep 2009 09:30:08 +0200

gnudatalanguage (0.9~rc1-1.2) unstable; urgency=low

  * Non-maintainer upload to fix FTBFS and other bugs.
  * Applied patch provided by naoliv to make gnudatalanguage compile with
    the new imagemagick (Closes: #485894)
  * Applied patch provided by Martin Michlmayr to make gnudatalanguage
    compile with gcc 4.4 (Closes: #504861)
  * Applied improved watch file, thanks to Daniel Leidert for the file.
    (Closes: #480455)
  * Changed fftw3-dev to libfftw3-dev at Build-Depends, thanks to Marco
    Rodrigues for the report. (Closes: #488169)
  * Changed netcdfg-dev to libnetcdfg-dev at Build-Depends.

 -- Margarita Manterola <marga@debian.org>  Wed, 27 May 2009 00:14:58 +0000

gnudatalanguage (0.9~rc1-1.1) unstable; urgency=low

  * Non-maintainer upload.
  * Fix FTBFS on arm, armel, mips, mipsel due to invalid LDFLAGS line.
    (Closes: #495470)

 -- Thiemo Seufer <ths@debian.org>  Tue, 19 Aug 2008 15:00:55 +0200

gnudatalanguage (0.9~rc1-1) unstable; urgency=low

  * New upstream version. (Closes: #470244)
  * Updated my email address.

 -- Gürkan Sengün <gurkan@phys.ethz.ch>  Sun, 06 Apr 2008 14:22:21 +0200

gnudatalanguage (0.9~pre6-1.1) unstable; urgency=low

  * Non-maintainer upload.
  * Fix FTBFS with GCC 4.3: missing #includes, thanks to Maximiliano Curia for
  * the patch. (Closes: #456058)

 -- Christoph Berg <myon@debian.org>  Fri, 04 Apr 2008 18:34:32 +0200

gnudatalanguage (0.9~pre6-1) unstable; urgency=low

  * Initial release. (Closes: #304159)
    Thanks to Juan A. Añel, Sergio Gelato, and Christian
    T. Steigies for their previous work on this package.

 -- Gürkan Sengün <gurkan@linuks.mine.nu>  Thu, 25 Oct 2007 13:59:49 +0200
