KiCad 命令行界面

INPUT_DIR

要导出的封装库目录 （.pretty）。

-h, --help

Show help for the footprint SVG export command.

-o <output dir>, --output <output dir>

The output directory for the exported files. When this argument is not used, the files are exported to the current directory.

-l <layer list>, --layers <layer list>

A comma-separated list of layer names to export from the footprint, such as F.Cu,B.Cu. If no layers are given, all layers are exported.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-t <theme name>, --theme <theme name>

The name of the theme to use for export. If no theme is given, the footprint editor’s currently selected theme is used.

--fp <footprint>, --footprint <footprint>

The name of the specific footprint to export from the library. When this argument is not used, all footprints in the library are exported.

--sp, --sketch-pads-on-fab-layers

Draw pad outlines and their numbers on front and back fab layers.

--hdnp, --hide-DNP-footprints-on-fab-layers

Don’t plot text and graphics of DNP footprints on fab layers.

--sdnp, --sketch-DNP-footprints-on-fab-layers

Plot graphics of DNP footprints in sketch mode on fab layers.

--cdnp, --crossout-DNP-footprints-on-fab-layers

Plot an 'X' over the courtyard of DNP footprints on fab layers, and strikeout their reference designators.

--black-and-white

Export footprints in black and white.

INPUT_DIR

要升级的封装库目录 （.pretty）。

-h， --help

显示封装升级命令的帮助。

-o <output dir>， --output <output dir>

升级后封装的输出目录。不使用此参数时，升级后的封装会保存在原始封装之上。

--force

强制保存输入库，即使它已经是当前文件格式。

INPUT_FILE

要在其上运行 DRC 的电路板文件。

-h， --help

显示 DRC 命令的帮助。

-o <output filename>， --output <output filename>

生成的 DRC 报告的输出文件名。不使用该参数时，输出文件名将与输入文件相同，根据所选格式，文件扩展名为 .rpt 或 .json。

-D <variable name>=<value>, --define-var <variable_name>=<value>

添加或覆盖工程变量定义。可多次使用以定义多个变量。

--format <format>

报告文件格式。选项为 report （默认）或 json 。

--all-track-errors

报告每个布线的所有错误。

--schematic-parity

测试 PCB 和原理图之间的奇偶校验。

--units <unit>

要在报表中使用的单位。选项为 mm（默认）、in 或 mils。

--severity-all

报告所有 DRC 违规行为。这相当于使用所有其他 DRC 严重性选项。

--severity-error

报告所有错误级别的 DRC 违规行为。该选项可与其他 DRC 严重性选项结合使用。

--severity-warning

报告所有警告级别的 DRC 违规行为。该选项可与其他 DRC 严重性选项结合使用。

--severity-exclusions

报告所有排除在外的 DRC 违规行为。该选项可与其他 DRC 严重性选项结合使用。

--exit-code-violations

根据是否存在 DRC 违规，返回退出代码。如果没有发现违规，则退出代码为 0；如果发现违规，则退出代码为 5。

INPUT_FILE

要导出的电路板文件。

-h, --help

Show help for the BREP export command.

-o <output filename>, --output <output filename>

The output filename. When this argument is not used, the output filename will be the same as the input file, with the .brep file extension.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-f, --force

Overwrite output file.

--no-unspecified

Exclude 3D models of components with 'unspecified' footprint type.

--no-dnp

Exclude 3D models of components with 'Do not populate' attribute.

--grid-origin

Use grid origin as origin of output file.

--drill-origin

Use drill origin as origin of output file.

--subst-models

Replace VRML models in footprints with STEP or IGS models of the same name, if they exist.

--board-only

Only include the board itself in the generated model; exclude all component models.

--cut-vias-in-body

Cut via holes in board body even if conductor layers are not exported.

--no-board-body

Exclude board body.

--no-components

Exclude 3D models for components.

--component-filter <reference designator list>

Only include component 3D models matching this list of reference designators (comma-separated, wildcards supported)

--include-tracks

Include tracks and vias on outer conductor layers in export (time consuming).

--include-pads

Include pads in export (time consuming).

--include-zones

Include zones in export (time consuming).

--include-inner-copper

Include elements on inner conductor layers in export.

--include-silkscreen

Include silkscreen graphics in export as a set of flat faces.

--include-soldermask

Include solder mask layers in export as a set of flat faces.

--fuse-shapes

Fuse overlapping geometry together in export (time consuming).

--fill-all-vias

Don’t cut via holes in conductor layers.

--min-distance <min distance>

Tolerance for considering two points to be in the same location. Default: 0.01mm.

--net-filter <net filter>

Only include copper items belonging to nets matching this wildcard.

--user-origin <output origin>

Specify a custom origin for the output file, with X and Y coordinates. For example, 1x1in, 1x1inch, or 25.4x25.4mm. The default unit is millimeters.

INPUT_FILE

要导出的电路板文件。

-h， --help

显示钻孔文件导出命令的帮助。

-o <output dir>， --output <output dir>

钻孔文件的输出目录。不使用此参数时，钻孔文件保存在当前目录下。

--format <format>

钻取文件格式。选项为 excellon（默认）或 gerber。

--drill-origin <origin>

钻孔文件的坐标原点。选项有 absolute （默认），用于使用电路板的绝对原点；或 plot ，用于使用电路板的钻孔/置位原点。

--excellon-zeros-format <format>

钻孔文件中零的表示格式。提供四种选项：decimal（默认，采用十进制格式）、suppressleading（省略前导零）、suppresstrailing（省略尾随零）、以及 keep（保留所有零）。这些设置仅在 Excellon 格式的钻孔文件中有效。

--excellon-oval-format <format>

控制椭圆形通孔的钻孔策略。提供两种模式：route（布线模式）和 alternate（备用模式，默认选项）。这些设置仅在 Excellon 格式的钻孔文件中生效。

-U <units>， --excellon-units <units>

钻孔文件的单位。选项为 mm（默认）或 in。仅适用于 Excellon 格式的钻孔文件。

--excellon-mirror-y

沿 Y 方向镜像钻孔文件。仅适用于 Excellon 格式的钻孔文件。

--excellon-min-header

在钻孔文件中使用最小的钻头。仅适用于 Excellon 格式的钻孔文件。

--excellon-separate-th

为电镀通孔和非电镀通孔生成不同的钻孔文件。 仅适用于 Excellon 格式的钻孔文件。

--generate-map

除了钻取文件之外，还生成映射文件。

--map-format <format>

映射文件格式。选项包括 pdf（默认）、gerberx2、ps、dxf 或 svg。

--gerber-precision <precision>

钻孔文件的精度（位数）。有效选项为 5 或 6（默认）。 仅适用于 Gerber 格式的钻孔文件。

INPUT_FILE

要导出的电路板文件。

-h, --help

Show help for the DXF export command.

-o <output filename>, --output <output filename>

The output filename. When this argument is not used, the output filename will be the same as the input file, with the .dxf file extension.

-l <layer list>, --layers <layer list>

A comma-separated list of layer names to export from the footprint, such as F.Cu,B.Cu. At least one layer must be given.

--drawing-sheet <sheet path>

Path to drawing sheet to use in plot, overriding the drawing sheet specified in the board file.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

--erd, --exclude-refdes

Exclude footprint reference designators from plot.

--ev, --exclude-value

Exclude footprint values from plot.

--uc, --use-contours

Plot graphic items using their contours.

--udo, --use-drill-origin

Plot using the drill/place file origin.

-ibt, --include-border-title

Include sheet border and title block in plot.

--ou <unit>, --output-units <unit>

Output units. Options are mm or in (default).

--drill-shape-opt <shape>

The shape of drill marks in the plot. Options are 0 for no drill marks, 1 for small marks, or 2 for actual size marks (default).

--cl <layer list>, --common-layers <layer list>

A comma-separated list of layer names to plot on all layers, such as F.Cu,B.Cu.

--mode-single

Generates a single file with the output arg path acting as the complete directory and filename path. COMMON_LAYER_LIST does not function in this mode. Instead LAYER_LIST controls all layers plotted.

--mode-multi

Generates one or more files with behavior similar to the KiCad GUI plotting. The given output path specifies a directory in which files may be output.

--plot-invisible-text

Force plotting of values and references, even if they are invisible.

INPUT_FILE

要导出的电路板文件。

-h, --help

Show help for the DXF export command.

-o <output filename>, --output <output filename>

The output filename. When this argument is not used, the output filename will be the same as the input file, with the .cad file extension.

-l <layer list>, --layers <layer list>

A comma-separated list of layer names to export from the footprint, such as F.Cu,B.Cu. At least one layer must be given.

--drawing-sheet <sheet path>

Path to drawing sheet to use in plot, overriding the drawing sheet specified in the board file.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-f, --flip-bottom-pads

Flip bottom footprint padstacks.

--unique-pins

Generate unique pin names.

--unique-footprints

Generate a new shape for each footprint instance (do not reuse shapes).

--use-drill-origin

Use drill/place file origin as origin.

--store-origin-coord

Save the origin coordinates in the file.

INPUT_FILE

要导出的电路板文件。

-h, --help

Show help for the Gerber export command.

-o <output dir>, --output <output dir>

The output folder for the exported files. When this argument is not used, the files are exported to the current directory.

-l <layer list>, --layers <layer list>

A comma-separated list of layer names to plot from the board, such as F.Cu,B.Cu. If this argument is not used, all layers will be plotted.

--drawing-sheet <sheet path>

Path to drawing sheet to use in plot, overriding the drawing sheet specified in the board file.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

--erd, --exclude-refdes

Exclude footprint reference designators from plot.

--ev, --exclude-value

Exclude footprint values from plot.

--ibt, --include-border-title

Include the sheet border and title block.

--no-x2

Do not use the extended X2 format.

--no-netlist

Do not include netlist attributes.

--subtract-soldermask

Remove silkscreen from areas without soldermask.

--disable-aperture-macros

Disable aperture macros.

--use-drill-file-origin

Use drill/place file origin instead of absolute origin.

--precision <precision>

The precision (number of digits) for the Gerber files. Valid options are 5 or 6 (default).

--no-protel-ext

Use .gbr file extension instead of Protel file extensions (.gbl, .gtl, etc.).

--plot-invisible-text

Force plotting of values and references, even if they are invisible.

--cl <layer list>, --common-layers <layer list>

A comma-separated list of layer names to plot on all layers, such as F.Cu,B.Cu.

--board-plot-params

Use the Gerber plot settings already configured in the board file.

INPUT_FILE

要导出的电路板文件。

-h, --help

Show help for the Gerber export command.

-o <output filename>, --output <output filename>

The output filename. When this argument is not used, the output filename will be the same as the input file, with the .gbr file extension.

-l <layer list>, --layers <layer list>

A comma-separated list of layer names to plot from the board, such as F.Cu,B.Cu. All layers will be plotted in the output file. At least one layer must be given.

--drawing-sheet <sheet path>

Path to drawing sheet to use in plot, overriding the drawing sheet specified in the board file.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

--erd, --exclude-refdes

Exclude footprint reference designators from plot.

--ev, --exclude-value

Exclude footprint values from plot.

--ibt, --include-border-title

Include the sheet border and title block.

--no-x2

Do not use the extended X2 format.

--no-netlist

Do not include netlist attributes.

--subtract-soldermask

Remove silkscreen from areas without soldermask.

--disable-aperture-macros

Disable aperture macros.

--use-drill-file-origin

Use drill/place file origin instead of absolute origin.

--precision <precision>

The precision (number of digits) for the Gerber files. Valid options are 5 or 6 (default).

--no-protel-ext

Use .gbr file extension instead of Protel file extensions (.gbl, .gtl, etc.).

--plot-invisible-text

Force plotting of values and references, even if they are invisible.

INPUT_FILE

要导出的电路板文件。

-h, --help

Show help for the GLB export command.

-o <output filename>, --output <output filename>

The output filename. When this argument is not used, the output filename will be the same as the input file, with the .glb file extension.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-f, --force

Overwrite output file.

--no-unspecified

Exclude 3D models of components with 'unspecified' footprint type.

--no-dnp

Exclude 3D models of components with 'Do not populate' attribute.

--grid-origin

Use grid origin as origin of output file.

--drill-origin

Use drill origin as origin of output file.

--subst-models

Replace VRML models in footprints with STEP or IGS models of the same name, if they exist.

--board-only

Only include the board itself in the generated model; exclude all component models.

--cut-vias-in-body

Cut via holes in board body even if conductor layers are not exported.

--no-board-body

Exclude board body.

--no-components

Exclude 3D models for components.

--component-filter <reference designator list>

Only include component 3D models matching this list of reference designators (comma-separated, wildcards supported)

--include-tracks

Include tracks and vias on outer conductor layers in export (time consuming).

--include-pads

Include pads in export (time consuming).

--include-zones

Include zones in export (time consuming).

--include-inner-copper

Include elements on inner conductor layers in export.

--include-silkscreen

Include silkscreen graphics in export as a set of flat faces.

--include-soldermask

Include solder mask layers in export as a set of flat faces.

--fuse-shapes

Fuse overlapping geometry together in export (time consuming).

--fill-all-vias

Don’t cut via holes in conductor layers.

--min-distance <min distance>

Tolerance for considering two points to be in the same location. Default: 0.01mm.

--net-filter <net filter>

Only include copper items belonging to nets matching this wildcard.

--user-origin <output origin>

Specify a custom origin for the output file, with X and Y coordinates. For example, 1x1in, 1x1inch, or 25.4x25.4mm. The default unit is millimeters.

INPUT_FILE

要导出的电路板文件。

-h, --help

Show help for the IPC-2581 export command.

-o <output filename>, --output <output filename>

The output filename. When this argument is not used, the output filename will be the same as the input file, with the .xml file extension.

--drawing-sheet <sheet path>

Path to drawing sheet to use in plot, overriding the drawing sheet specified in the board file.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

--precision <precision>

The precision (number of digits after the decimal separator) for the exported file. The default is 6.

--compress

Compress output file as a ZIP file.

--version <IPC-2581 standard version>

IPC-2581 standard version to use. Options are B or C (default).

--units

Units to use in export. Options are mm (default) or in.

--bom-col-int-id

Name of the part field to use for the Bill of Materials Internal ID column. This can be any footprint field, or blank to omit this column.

--bom-col-mfg-pn

Name of the part field to use for the Bill of Materials Manufacturer Part Number column. This can be any footprint field, or blank to omit this column.

--bom-col-mfg

Name of the part field to use for the Bill of Materials Manufacturer column. This can be any footprint field, or blank to omit this column.

--bom-col-dist-pn

Name of the part field to use for the Bill of Materials Distributor Part Number column. This can be any footprint field, or blank to omit this column.

--bom-col-dist

Name of the part field to use for the Bill of Materials Distributor column. This can be any footprint field, or blank to omit this column.

INPUT_FILE

要导出的电路板文件。

-h, --help

Show help for the ODB++ export command.

-o <output filename>, --output <output filename>

The output filename, or folder name if no compression is used.

--drawing-sheet <sheet path>

Path to drawing sheet to use in plot, overriding the drawing sheet specified in the board file.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

--precision <precision>

The precision (number of digits after the decimal separator) for the exported file. The default is 2.

--compression <mode>

Compression mode. Options are none, zip (default), or tgz.

--units <unit>

Units to use in the output file. Options are mm (default) or in.

INPUT_FILE

要导出的电路板文件。

-h, --help

Show help for the PDF export command.

-o <output filename>, --output <output filename>

The output filename. When this argument is not used, the output filename will be the same as the input file, with the .pdf file extension.

-l <layer list>, --layers <layer list>

A comma-separated list of layer names to export from the board, such as F.Cu,B.Cu. At least one layer must be given.

--drawing-sheet <sheet path>

Path to drawing sheet to use in plot, overriding the drawing sheet specified in the board file.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-m, --mirror

Mirror the board. This can be useful for showing bottom layers.

--erd, --exclude-refdes

Exclude footprint reference designators from plot.

--ev, --exclude-value

Exclude footprint values from plot.

--ibt, --include-border-title

Include the sheet border and title block.

--sp, --sketch-pads-on-fab-layers

Draw pad outlines and their numbers on front and back fab layers.

--hdnp, --hide-DNP-footprints-on-fab-layers

Don’t plot text and graphics of DNP footprints on fab layers.

--sdnp, --sketch-DNP-footprints-on-fab-layers

Plot graphics of DNP footprints in sketch mode on fab layers.

--cdnp, --crossout-DNP-footprints-on-fab-layers

Plot an 'X' over the courtyard of DNP footprints on fab layers, and strikeout their reference designators.

-n, --negative

Plot in negative.

--black-and-white

Plot in black and white.

-t <theme name>, --theme <theme name>

The name of the theme to use for export. If no theme is given, the board editor’s currently selected theme is used.

--drill-shape-opt

The shape of drill marks in the plot. Options are 0 for no drill marks, 1 for small marks, or 2 for actual size marks (default).

--cl <layer list>, --common-layers <layer list>

A comma-separated list of layer names to plot on all layers, such as F.Cu,B.Cu.

--plot-invisible-text

Force plotting of values and references, even if they are invisible.

--mode-single

Generates a single file with the output arg path acting as the complete directory and filename path. COMMON_LAYER_LIST does not function in this mode. Instead LAYER_LIST controls all layers plotted.

--mode-separate

Plot the layers to individual PDF files.

--mode-multipage

Plot the layers to a single PDF file with multiple pages.

INPUT_FILE

要导出的电路板文件。

-h, --help

Show help for the PLY export command.

-o <output filename>, --output <output filename>

The output filename. When this argument is not used, the output filename will be the same as the input file, with the .ply file extension.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-f, --force

Overwrite output file.

--no-unspecified

Exclude 3D models of components with 'unspecified' footprint type.

--no-dnp

Exclude 3D models of components with 'Do not populate' attribute.

--grid-origin

Use grid origin as origin of output file.

--drill-origin

Use drill origin as origin of output file.

--subst-models

Replace VRML models in footprints with STEP or IGS models of the same name, if they exist.

--board-only

Only include the board itself in the generated model; exclude all component models.

--cut-vias-in-body

Cut via holes in board body even if conductor layers are not exported.

--no-board-body

Exclude board body.

--no-components

Exclude 3D models for components.

--component-filter <reference designator list>

Only include component 3D models matching this list of reference designators (comma-separated, wildcards supported)

--include-tracks

Include tracks and vias on outer conductor layers in export (time consuming).

--include-pads

Include pads in export (time consuming).

--include-zones

Include zones in export (time consuming).

--include-inner-copper

Include elements on inner conductor layers in export.

--include-silkscreen

Include silkscreen graphics in export as a set of flat faces.

--include-soldermask

Include solder mask layers in export as a set of flat faces.

--fuse-shapes

Fuse overlapping geometry together in export (time consuming).

--fill-all-vias

Don’t cut via holes in conductor layers.

--min-distance <min distance>

Tolerance for considering two points to be in the same location. Default: 0.01mm.

--net-filter <net filter>

Only include copper items belonging to nets matching this wildcard.

--user-origin <output origin>

Specify a custom origin for the output file, with X and Y coordinates. For example, 1x1in, 1x1inch, or 25.4x25.4mm. The default unit is millimeters.

INPUT_FILE

要导出的电路板文件。

-h, --help

显示位置文件导出命令的帮助信息。

-o <output filename>, --output <output filename>

设置输出文件名。如果不使用此参数，输出文件名将与输入文件相同，但后缀为 .pos。

--side <side>

指定要导出的电路板面。选项有 front（正面）、back（背面）或 both（双面，默认）。Gerber 格式不支持 both 选项。

--format <format>

位置文件的格式。选项有 ascii（默认）、csv 或 gerber。

--units <unit>

位置文件中的单位。选项有 in（英寸，默认）或 mm（毫米）。此选项对 Gerber 格式无效。

--bottom-negate-x

对底层的元件封装使用负 X 坐标。此选项对 Gerber 格式无效。

--use-drill-file-origin

使用钻孔/放置文件的原点而非绝对原点。此选项对 Gerber 格式无效。

--smd-only

只包含表面贴装技术 (SMT) 元件。此选项对 Gerber 格式无效。

--exclude-fp-th

排除所有带有通孔焊盘的封装。此选项对 Gerber 格式无效。

--exclude-dnp

排除所有具有 “不安装” (DNP) 属性的封装。

--gerber-board-edge

导出时包含电路板边缘层（仅限 Gerber 格式）。

INPUT_FILE

要导出的电路板文件。

-h, --help

Show help for the STEP file export command.

-o <output filename>, --output <output filename>

The output filename. When this argument is not used, the output filename will be the same as the input file, with the .step file extension.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-f, --force

Overwrite output file.

--no-unspecified

Exclude 3D models of components with 'unspecified' footprint type.

--no-dnp

Exclude 3D models of components with 'Do not populate' attribute.

--grid-origin

Use grid origin as origin of output file.

--drill-origin

Use drill origin as origin of output file.

--subst-models

Replace VRML models in footprints with STEP or IGS models of the same name, if they exist.

--board-only

Only include the board itself in the generated model; exclude all component models.

--cut-vias-in-body

Cut via holes in board body even if conductor layers are not exported.

--no-board-body

Exclude board body.

--no-components

Exclude 3D models for components.

--component-filter <reference designator list>

Only include component 3D models matching this list of reference designators (comma-separated, wildcards supported)

--include-tracks

Include tracks and vias on outer conductor layers in export (time consuming).

--include-pads

Include pads in export (time consuming).

--include-zones

Include zones in export (time consuming).

--include-inner-copper

Include elements on inner conductor layers in export.

--include-silkscreen

Include silkscreen graphics in export as a set of flat faces.

--include-soldermask

Include solder mask layers in export as a set of flat faces.

--fuse-shapes

Fuse overlapping geometry together in export (time consuming).

--fill-all-vias

Don’t cut via holes in conductor layers.

--min-distance <min distance>

Tolerance for considering two points to be in the same location. Default: 0.01mm.

--net-filter <net filter>

Only include copper items belonging to nets matching this wildcard.

--no-optimize-step

Do not optimize STEP file. This enables writing parametric curves, which reduces file sizes and write/read times, but may reduce compatibility with other software.

--user-origin <output origin>

Specify a custom origin for the output file, with X and Y coordinates. For example, 1x1in, 1x1inch, or 25.4x25.4mm. The default unit is millimeters.

INPUT_FILE

要导出的电路板文件。

-h, --help

Show help for the STL export command.

-o <output filename>, --output <output filename>

The output filename. When this argument is not used, the output filename will be the same as the input file, with the .stl file extension.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-f, --force

Overwrite output file.

--no-unspecified

Exclude 3D models of components with 'unspecified' footprint type.

--no-dnp

Exclude 3D models of components with 'Do not populate' attribute.

--grid-origin

Use grid origin as origin of output file.

--drill-origin

Use drill origin as origin of output file.

--subst-models

Replace VRML models in footprints with STEP or IGS models of the same name, if they exist.

--board-only

Only include the board itself in the generated model; exclude all component models.

--cut-vias-in-body

Cut via holes in board body even if conductor layers are not exported.

--no-board-body

Exclude board body.

--no-components

Exclude 3D models for components.

--component-filter <reference designator list>

Only include component 3D models matching this list of reference designators (comma-separated, wildcards supported)

--include-tracks

Include tracks and vias on outer conductor layers in export (time consuming).

--include-pads

Include pads in export (time consuming).

--include-zones

Include zones in export (time consuming).

--include-inner-copper

Include elements on inner conductor layers in export.

--include-silkscreen

Include silkscreen graphics in export as a set of flat faces.

--include-soldermask

Include solder mask layers in export as a set of flat faces.

--fuse-shapes

Fuse overlapping geometry together in export (time consuming).

--fill-all-vias

Don’t cut via holes in conductor layers.

--min-distance <min distance>

Tolerance for considering two points to be in the same location. Default: 0.01mm.

--net-filter <net filter>

Only include copper items belonging to nets matching this wildcard.

--user-origin <output origin>

Specify a custom origin for the output file, with X and Y coordinates. For example, 1x1in, 1x1inch, or 25.4x25.4mm. The default unit is millimeters.

INPUT_FILE

要导出的电路板文件。

-h, --help

Show help for the SVG file export command.

-o <output filename>, --output <output filename>

The output filename. When this argument is not used, the output filename will be the same as the input file, with the .svg file extension.

-l <layer list>, --layers <layer list>

A comma-separated list of layer names to export from the board, such as F.Cu,B.Cu. At least one layer must be given.

--drawing-sheet <sheet path>

Path to drawing sheet to use in plot, overriding the drawing sheet specified in the board file.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-m, --mirror

Mirror the board. This can be useful for showing bottom layers.

-t <theme name>, --theme <theme name>

The name of the theme to use for export. If no theme is given, the board editor’s currently selected theme is used.

-n, --negative

Plot in negative.

--black-and-white

Plot in black and white.

--sp, --sketch-pads-on-fab-layers

Draw pad outlines and their numbers on front and back fab layers.

--hdnp, --hide-DNP-footprints-on-fab-layers

Don’t plot text and graphics of DNP footprints on fab layers.

--sdnp, --sketch-DNP-footprints-on-fab-layers

Plot graphics of DNP footprints in sketch mode on fab layers.

--cdnp, --crossout-DNP-footprints-on-fab-layers

Plot an 'X' over the courtyard of DNP footprints on fab layers, and strikeout their reference designators.

--page-size-mode <mode>

Set page sizing mode. Options are 0 (default), 1, or 2. 0 sets the output page size to fit the entire sheet, including drawing sheet frame and title block. 1 sets the output page size to match the current page size. 2 sets the output page size to the size of the board itself.

--exclude-drawing-sheet

Plot SVG without a drawing sheet.

--drill-shape-opt

The shape of drill marks in the plot. Options are 0 for no drill marks, 1 for small marks, or 2 for actual size marks (default).

--cl <layer list>, --common-layers <layer list>

A comma-separated list of layer names to plot on all layers, such as F.Cu,B.Cu.

--mode-single

Generates a single file with the output arg path acting as the complete directory and filename path. COMMON_LAYER_LIST does not function in this mode. Instead LAYER_LIST controls all layers plotted.

--mode-multi

Generates one or more files with behavior similar to the KiCad GUI plotting. The given output path specifies a directory in which files may be output.

--plot-invisible-text

Force plotting of values and references, even if they are invisible.

INPUT_FILE

要导出的电路板文件。

-h, --help

Show help for the VRML export command.

-o <output filename>, --output <output filename>

The output filename. When this argument is not used, the output filename will be the same as the input file, with the .wrl file extension.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-f, --force

Overwrite output file.

--no-unspecified

Exclude 3D models of components with 'unspecified' footprint type.

--no-dnp

Exclude 3D models of components with 'Do not populate' attribute.

--user-origin <output origin>

Specify a custom origin for the output file, with X and Y coordinates. For example, 1x1in, 1x1inch, or 25.4x25.4mm. The default unit is millimeters. If this option is not given, the board center is used.

--units <units>

Units to use in the output file. Options are mm, m, in (default), or tenths (tenths of an inch).

--models-dir <output model directory>

Name of output directory to copy component models into. If not used, component models are embedded into the output file.

--models-relative

With --models-dir, use relative paths in the output file.

INPUT_FILE

要导出的电路板文件。

-h, --help

Show help for the XAO export command.

-o <output filename>, --output <output filename>

The output filename. When this argument is not used, the output filename will be the same as the input file, with the .xao file extension.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-f, --force

Overwrite output file.

--no-unspecified

Exclude 3D models of components with 'unspecified' footprint type.

--no-dnp

Exclude 3D models of components with 'Do not populate' attribute.

--grid-origin

Use grid origin as origin of output file.

--drill-origin

Use drill origin as origin of output file.

--subst-models

Replace VRML models in footprints with STEP or IGS models of the same name, if they exist.

--board-only

Only include the board itself in the generated model; exclude all component models.

--cut-vias-in-body

Cut via holes in board body even if conductor layers are not exported.

--no-board-body

Exclude board body.

--no-components

Exclude 3D models for components.

--component-filter <reference designator list>

Only include component 3D models matching this list of reference designators (comma-separated, wildcards supported)

--include-tracks

Include tracks and vias on outer conductor layers in export (time consuming).

--include-pads

Include pads in export (time consuming).

--include-zones

Include zones in export (time consuming).

--include-inner-copper

Include elements on inner conductor layers in export.

--include-silkscreen

Include silkscreen graphics in export as a set of flat faces.

--include-soldermask

Include solder mask layers in export as a set of flat faces.

--fuse-shapes

Fuse overlapping geometry together in export (time consuming).

--fill-all-vias

Don’t cut via holes in conductor layers.

--min-distance <min distance>

Tolerance for considering two points to be in the same location. Default: 0.01mm.

--net-filter <net filter>

Only include copper items belonging to nets matching this wildcard.

--user-origin <output origin>

Specify a custom origin for the output file, with X and Y coordinates. For example, 1x1in, 1x1inch, or 25.4x25.4mm. The default unit is millimeters.

INPUT_FILE

Board file to render.

-h, --help

Show help for the render command.

-o <output filename>, --output <output filename>

The output filename. This argument must be given. The file extension given in this argument determines the output image file format. The filename must end with either .png (for PNG files) or .jpg/.jpeg (for JPG files).

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-w <width>, --width <width>

Image width in pixels. Default: 1600.

-h <height>, --height <height>

Image height in pixels. Default: 900.

--side <side>

The side of the board to render. Options are top (default), bottom, left, right, front, or back.

--background <background>

Image background. Options are default (default), transparent, or opaque. For PNG files, default is transparent. For JPG files, default is opaque.

--quality <quality>

Render quality. Options are basic (default), high, user. When user is specified, the render settings stored in the project are used.

--preset <color preset>

Color preset. Options are follow_pcb_editor, follow_plot_settings (default), or legacy_preset_flag.

--floor

Enables floor, shadows and post-processing, even if disabled in quality preset.

--perspective

Use perspective projection instead of orthogonal.

--zoom <zoom level>

Camera zoom factor as an integer. Default: 1.

--pan <camera pan>

Set camera pan location, in millimeters, with the format 'X,Y,Z', e.g. '3,0,0'.

--pivot <pivot>

Set pivot point relative to the board center in centimeters, with the format 'X,Y,Z' e.g. '-10,2,0'.

--rotate <rotation>

Set board rotation around pivot point, in degrees, with the format 'X,Y,Z', e.g. '-45,0,45' for isometric view.

--light-top <intensity>

Top light intensity, format ’R,G,B'' or a single number, range: 0-1.

--light-bottom <intensity>

Bottom light intensity, format ’R,G,B'' or a single number, range: 0-1.

--light-side <intensity>

Side lights intensity, format ’R,G,B'' or a single number, range: 0-1.

--light-camera <intensity>

Camera light intensity, format ’R,G,B'' or a single number, range: 0-1.

--light-side-elevation <elevation>

Side lights elevation angle in degrees, range: 0-90.

INPUT_FILE

运行 ERC 的原理图文件。

-h, --help

显示 ERC 命令的帮助信息。

-o <output filename>, `--output <output filename>

生成的 ERC 报告的输出文件名。如果不使用此参数，输出文件名将与输入文件相同，后缀为 .rpt 或 .json，具体取决于所选的格式。

-D <variable name>=<value>, --define-var <variable_name>=<value>

添加或覆盖工程变量定义。可以多次使用以定义多个变量。

--format <format>

报告文件格式。选项有 report（默认）或 json。

--units <unit>

报告中使用的单位。选项有 mm（默认）、in 或 mils。

--severity-all

报告所有 ERC 违规。这相当于使用所有其他 ERC 严重性选项。

--severity-error

报告所有错误级别的 ERC 违规。可以与其他 ERC 严重性选项组合使用。

--severity-warning

报告所有警告级别的 ERC 违规。可以与其他 ERC 严重性选项组合使用。

--severity-exclusions

报告所有被排除的 ERC 违规。可以与其他 ERC 严重性选项组合使用。

--exit-code-violations

根据是否存在 ERC 违规返回退出代码。如果未发现违规，则退出代码为 0；如果找到任何违规，则退出代码为 5。

INPUT_FILE

要导出的原理图文件。

-h, --help

Shows help message and exits

-o <output filename>, --output <output filename>

The output filename. When this argument is not used, the output filename will be the same as the input file, with a .csv file extension.

--preset <preset>

Use a named BOM preset setting from the schematic, e.g. "Grouped By Value".

--format-preset <format preset>

Use a named BOM format preset setting from the schematic, e.g. CSV.

--fields <fields>

An ordered list of fields to export. * includes all fields. Special symbol fields such as DNP or Exclude from board can be accessed with ${DNP} or ${EXCLUDE_FROM_BOARD}, respectively (see the text variable documentation for a list of fields). Default: "Reference,Value,Footprint,${QUANTITY},${DNP}".

--labels <labels>

An ordered list of labels to apply the exported fields (default: "Refs,Value,Footprint,Qty,DNP").

--group-by <fields>

Fields to group references by when field values match.

--sort-field <fields>

Field name to sort by (default: "Reference").

--sort-asc

If given, sort in ascending order. If not given, sort in descending order.

--filter <filter>

Filter string to remove output lines.

--exclude-dnp

Exclude symbols with the "Do not populate" attribute.

--include-excluded-from-bom

Include symbols marked 'Exclude from BOM'.

--field-delimiter <delimiter>

Separator between output fields/columns (default: ",").

--string-delimiter <delimiter>

Character to surround fields with (none by default).

--ref-delimiter <delimiter>

Character to place between individual references (default: ",").

--ref-range-delimiter <delimiter>

Character to place in ranges of references (default: "-"). Leave blank for no ranges.

--keep-tabs

Keep tab characters from input fields. Stripped by default.

--keep-line-breaks

Keep line break characters from input fields. Stripped by default.

INPUT_FILE

要导出的原理图文件。

-h, --help

Show help for the DXF file export command.

-o <output dir>, --output <output dir>

The output folder for the exported files. When this argument is not used, the files are exported to the current directory.

--drawing-sheet <sheet path>

Path to drawing sheet to use in plot, overriding the drawing sheet specified in the schematic file.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-t <theme name>, --theme <theme name>

The name of the theme to use for export. If no theme is given, the schematic editor’s currently selected theme is used.

-b, --black-and-white

Export schematic in black and white.

-e, --exclude-drawing-sheet

Plot DXF without a drawing sheet.

--default-font <font name>

Default font name. Default: "KiCad Font".

-p <page list>, --pages <page list>

Comma-separated list of pages to export. Blank or unspecified means all pages. To plot specific pages, give the root sheet as INPUT_FILE and specify the desired output pages with the --pages argument.

INPUT_FILE

要导出的原理图文件。

-h, --help

Show help for the HPGL file export command.

-o <output dir>, --output <output dir>

The output folder for the exported files. When this argument is not used, the files are exported to the current directory.

--drawing-sheet <sheet path>

Path to drawing sheet to use in plot, overriding the drawing sheet specified in the schematic file.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-e, --exclude-drawing-sheet

Plot HPGL without a drawing sheet.

--default-font <font name>

Default font name. Default: "KiCad Font".

--pages <page list>

Comma-separated list of pages to export. Blank or unspecified means all pages. To plot specific pages, give the root sheet as INPUT_FILE and specify the desired output pages with the --pages argument.

-p <pen size>, --pen-size <pen size>

Set the pen width. The default pen size is 0.5 mm.

-r <origin>, --origin <origin>

Set plotter origin and scale. Options are 0, 1 (default), 2, or 3. 0 sets the origin to the bottom left and uses plotter units. 1 sets the origin to the center and uses plotter units. 2 scales to the page, and 3 scales to the content within the page.

INPUT_FILE

要导出的原理图文件。

-h, --help

Show help for the netlist export command.

-o <output filename>, --output <output filename>

The output filename. When this argument is not used, the output filename will be the same as the input file, with a .net file extension.

-f <format>, --format <format>

The netlist output format. Options are kicadsexpr (default), kicadxml, cadstar, orcadpcb2, spice, spicemodel, pads, or allegro.

INPUT_FILE

要导出的原理图文件。

-h, --help

Show help for the PDF file export command.

-o <output filename>, --output <output filename>

The output filename. When this argument is not used, the output filename will be the same as the input file, with a .pdf file extension.

--drawing-sheet <sheet path>

Path to drawing sheet to use in plot, overriding the drawing sheet specified in the schematic file.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-t <theme name>, --theme <theme name>

The name of the theme to use for export. If no theme is given, the schematic editor’s currently selected theme is used.

-b, --black-and-white

Export schematic in black and white.

-e, --exclude-drawing-sheet

Plot PDF without a drawing sheet.

--default-font <font name>

Default font name. Default: "KiCad Font".

--exclude-pdf-property-popups

Do not generate property popups in PDF.

--exclude-pdf-hierarchical-links

Do not generate clickable links for hierarchical elements in PDF.

--exclude-pdf-metadata

Do not generate PDF metadata from AUTHOR and SUBJECT variables.

-n, --no-background-color

Export schematic without a background color, regardless of theme.

-p <page list>, --pages <page list>

Comma-separated list of pages to export. Blank or unspecified means all pages. To plot specific pages, give the root sheet as INPUT_FILE and specify the desired output pages with the --pages argument.

INPUT_DIR

要导出的原理图文件。

-h, --help

Show help for the PS file export command.

-o <output dir>, --output <output dir>

The output folder for the exported files. When this argument is not used, the files are exported to the current directory.

--drawing-sheet <sheet path>

Path to drawing sheet to use in plot, overriding the drawing sheet specified in the schematic file.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-t <theme name>, --theme <theme name>

The name of the theme to use for export. If no theme is given, the schematic editor’s currently selected theme is used.

-b, --black-and-white

Export schematic in black and white.

-e, --exclude-drawing-sheet

Plot PS without a drawing sheet.

--default-font <font name>

Default font name. Default: "KiCad Font".

-n, --no-background-color

Export schematic without a background color, regardless of theme.

-p <page list>, --pages <page list>

Comma-separated list of pages to export. Blank or unspecified means all pages. To plot specific pages, give the root sheet as INPUT_FILE and specify the desired output pages with the --pages argument.

INPUT_FILE

要导出的原理图文件。

-h, --help

显示 BOM 导出命令的帮助信息。

-o <output filename>, --output <output filename>

指定输出文件的文件名。如果不使用此参数，输出文件名将默认与输入文件相同，仅在原文件名后添加 -bom.xml 后缀及文件扩展名。

INPUT_FILE

要导出的原理图文件。

-h, --help

Show help for the SVG file export command.

-o <output dir>, --output <output dir>

The output folder for the exported files. When this argument is not used, the files are exported to the current directory.

--drawing-sheet <sheet path>

Path to drawing sheet to use in plot, overriding the drawing sheet specified in the schematic file.

-D <variable name>=<value>, --define-var <variable_name>=<value>

Add or override project variable definitions. Can be used multiple times to define multiple variables.

-t <theme name>, --theme <theme name>

The name of the theme to use for export. If no theme is given, the schematic editor’s currently selected theme is used.

-b, --black-and-white

Export schematic in black and white.

-e, --exclude-drawing-sheet

Plot SVG without a drawing sheet.

--default-font <font name>

Default font name. Default: "KiCad Font".

-n, --no-background-color

Export schematic without a background color, regardless of theme.

-p <page list>, --pages <page list>

Comma-separated list of pages to export. Blank or unspecified means all pages. To plot specific pages, give the root sheet as INPUT_FILE and specify the desired output pages with the --pages argument.

INPUT_FILE

用于导出的符号库文件。

-h, --help

显示符号 SVG 导出命令的帮助信息。

-o <output dir>, --output <output dir>

设置导出文件的输出文件夹。如果未使用此参数，文件将被导出到当前目录。

-t <theme name>, --theme <theme name>

指定用于导出的主题名称。如果没有给出主题，则使用符号编辑器中当前选择的主题。

-s <symbol name>, --symbol <symbol name>

指定从库中导出的特定符号。如果未使用此参数，则会导出库中的所有符号。

--black-and-white

以黑白模式导出符号。

--include-hidden-pins

在导出的 SVG 中包含隐藏引脚。

--include-hidden-fields

在导出的 SVG 中包含隐藏的符号字段。

INPUT_FILE

要升级的符号库。

-h, --help

显示符号升级命令的帮助信息。.

-o <output filename>, --output <output filename>

指定升级后符号库的输出文件名。如果不使用此参数，升级后的符号库将覆盖原来的库文件。

--force

即使输入的库已经是当前文件格式，也强制重新保存库文件。